Converters.TV Hand View III User manual

PC VGA to TV Video Converter
Hand View III ID# 517
Operation Manual

Introduction
The PC VGA to TV Video Converter-Hand View III is a handed-size
universal VGA to TV converter box. It supports resolution up to
1280x1024. ompact size, Power from USB port, easy for carry. It is best
for P GAME, P DVD, Internet viewing on TV, Entertainment,
Education and Presentation.
Feature
•Pure hardware design, just Plug & Display. No software driver is required and it
is co patible with any operation syste .
•The PC VGA to TV Video Converter-Hand View II has two
odel :
I. Model one (for NTSC / PAL ) :
•INPUT : VGA, USB 5V
•OUTPUT : VIDEO, S-VIDEO, VGA ( connect to PC Monitor)
II. Model two (for Europe ) :
•INPUT : VGA, USB 5V
•OUTPUT : VIDEO, S-VIDEO, VGA ( connect to PC Monitor), RGB
( For EUROPE syste RGB SCART input )
•Si ultaneous display on VGA onitor and TV.
•Allows SIZE change ( overscan and underscan function ) .
•Power fro USB port or PS2 port ( optional ) ( DC 5V ).
•True 24 bit A/D converter for the true 16.7 illion color conversion.
•Supports IBM PC and MAC G4.
•Supports one of the following syste : NTSC(US/Taiwan), NTSC (JAPAN), PAL,
PAL-M, PAL-N syste .
Mode and
Re olution Table
This converter supports the following VGA ( IBM PC) display odes:
Resolution 640 x 480 800 x 600 1024 x 768 1280x1024
Vertical
Frequency(Hz) 60,72, 75,85 60,72,75,85 60,70,75,85 60

This converter supports the following MAC G4 display odes
Resolution 640 x 480 832 x 624
Vertical Frequency(Hz) 66 75
Application
•Entertainment – play V D, DVD movies, Internet viewing on TV.
Experience P games on TV.
•Presentations – Ideal for both classrooms and conference rooms.
•Documentation – apture P images on video tape.
•Training – Easy software training via video tape.
Sy tem
Requirement
•Desktop or Notebook PC co patible with IBM PC with USB port and VGA
output.
•TV or VCR which supports NTSC or PAL video standard with co posite video
input, S-Video input, RGB input ( for Europe syste ).
In tallation

Connector
lVIDEO OUT : onnects HAND VIEW III to the VIDEO input of TV/V R or Video
Projector, using a standard video cable (not included).
lS-VIDEO OUT:
onnects HAND VIEW IIII to your TV/V R or Video Projector supporting the
S-VIDEO input, using a standard video cable (not included).
lVGA OUT: onnects HAND VIEW III to computer monitor(VGA OUT).
lVGA IN: onnects HAND VIEW III to P (VGA IN).
lUSB : onnects HAND VIEW III to USB port or PS2 port ( optional ) (D POWER
IN).
NOTE :
The P to TV able also supports high quality S-VIDEO.
If your TV or V T supports S-VIDEO IN, we highly recommend you use it to get the best TV
picture.
Button & Switch
l SIZE : ( OVERSCAN / UNDERSCAN ：
Press this button to select “ OVERSCAN ” or “ UNDERSCAN “ mode .
l FINE TUNE : Press this button to adjust image quality for TV.

l CVBS / RGB :
Slide to RGB side, only RGB out connector has function.
Slide to CVBS side, only S-VIDEO out and VIDEO out can output signal.
In tallation for
IBM PC U er
The HAND VIEW III is a “Plug and Display” video converter. The only require ent to get
the output of the co puter on the TV is to ake the proper connections & ensure that
your co puter display is set within the supported para eters. Please read the following
sections carefully for the installation of the hardware. Please refer to the i age below and
overview of the process.

IMPORTANT! We highly recommend you to comply with the tep of in tallation otherwi e it
will cau e you much inconvenience.
1. Make sure your co puter’s (laptop, notebook or desktop PC) power is turned Off.
2. Connect HAND VIEW III to your TV、VCR or Video Projector supporting the
Video Input or S-VIDEO or RGB ( for Europe syste ) Input.
3. Connect HAND VIEW III to onitor.
4. Connect HAND VIEW III to VGA card output of PC.
5. Power on your PC.
6. Connect HAND VIEW III to USB port or PS2 port ( optional )of PC.
7. Turn on your TV/VCR/Projector or Monitor to get the picture on the .
Technical Tip
The following are problems that might arise when using the P to TV
converter, and possible solutions to them.
Q & A:
Q: How can I enhance the display quality?
A: You can usually decrease the contrast and increase brightness control to get the better
picture.
Q: I connect u ing a NOTEBOOK PC, but no output i di played on TV.
A: Check your co puter's User's Manual for specific instructions for displaying an external
VGA signal or “OUTPUT” .( Typically, Many Notebook co puters have 3 settings, VGA
external only, VGA internal only, and VGA internal & external si ultaneously)