Converters.TV 15340 User manual

HDMI to CV/SV Scaler with HDMI Bypass
(Apple Compatible) - ID# 1 340
Operation Manual

Introduction
The HDMI to CV/S-Video Converter is designed to convert the digital signal from HDMI
(or DVI) source to analog signal of NTSC or AL system, with L/R stereo audio. As well as
S-Video and Composite video outputs, it also provides an HDMI bypass output to
deliver the original signal, and a Coaxial output to send S/ DIF digital audio to an
amplifier. Not only these, the device also has manual selection of underscan and
overscan on output image to ensure the screen best fit for viewer’s pleasantation. And,
the model has a special Apple Mode switch which allows user to use Apple TV or other
Apple devices as source equipment.
Features
•HDMI, HDC and DVI compliant
•Converts video signal from HDMI source to NTSC or AL signal (selectable)
•Converts digital audio from HDMI source to analog stereo audio
•Accepts a wide range of HDTV input resolutions, from 480i to 1080p@60Hz and
C from VGA@60Hz to WUXGA@60Hz (RB)
•Supports Coaxial input audio sample rate 44.1KHz, 48KHz and 96KHz
•Output image overscan or underscan switch ensure best fit on screen
•Apple Mode switch guarrantees the use of Apple devices
Applications
•HDMI to Composite Video or S-Video signal conversion
•HDMI to NTSC/ AL system conversion
•HDMI to SD resolution for recordgin/monitoring
System
Requirements
Source equipment such as C/Laptor or HDMI camcorder and display devices such as
TV/monitor with HDMI connection cables.

Operation Controls
and Functions
Front Panel
1. PAL/NTSC Switch: Select the required format for output display.
2. UnderScan/OverScan Switch: Select the required screen for output display.
3. STD/Apple Switch: Switch to Apple mode when the connected HDMI source
equipment is an Apple device (such like Apple TV), otherwise, switch to STD mode.
4. LED: The yellow LED will illuminate when Apple Mode is selected, and the green LED
will illuminated for STD mode.
5. USB: This slot is reserved for firmware update only.
6. HDMI IN: Connect to the HDMI output of a source equipment such as an
C/Laptop or HDMI camcorder.
7. V DC & Power LED: Connect the 5V DC power supply into the unit and plug the
adaptor to AC wall outlet. The LED will illuminate when power supply is
connected.
Back Panel
1. R/L OUTPUT: Connect to active speaker with RCA cables for sychronize video output
with HDMI, S-Vide or Composite video.
2. COAX OUTPUT: Connect with active speaker wor amplifier with coaxial cable for
sychronize video output with HDMI, S-Video or Composite video.
3. CV OUTPUT: Connect to the Composite Video input of a display or recording
device.
4. SV OUTPUT: Connect to S-Video input of a display or recording device.
5. HDMI Bypass OUTPUT: Connect to the HDMI input of a display.

Supported
Resolutions
HD Resolutions PC Resolutions
480i/p@60 640x4480@60,72,75,85
576i/p@50 720x400@70
720p@50/60 800x600@56,60,72,75,85
1080p@24 1024x768@60,70,75,85
1080i@50/60 1152x864@70,75,85
1080p@50/60 1280x720@60(CVT)
1280x768@60,60(RB)
1280x800@60,60(RB0,75
1280x960@60
1280x1024@60,75
1366x768@60,60(RB)
1400x1050@60,60(RB)
1440x900@60,60(RB),75
1600x900@60(RB)
1600x1200@60
1680x1050@60,60(RB)
1920x1200@60(RB)
Note: DVI source input does not support 480i and 576i
Supported Audio
Audio Output\ AV Source HDMI with Embedded Audio
HDMI Bypass es
Coaxial Audio es
Stereo Audio es (input audio supports LPCM 2CH)

Video and Audio
Conversion/Bypass
Options
INPUT Both video and audio from HDMI source
OUTPUT HDMI → Bypass, output original video
and audio from HDMI
COAXIAL → output digital audio from
HDMI
CV+R/L Audio → Ouput analog video/
audio converted from HDMI
SV+R/L Audio → Output analog video/
audio converted from HDMI
Note: 1. For DVI input or output you will need to use an HDMI to DVI
adaptor or cable.
2. When the signal from an HDMI or DVI source is protected by
HDCP the HDMI or DVI display also needs to support HDCP to
be able to show the content.
3. When receiving content that has HDCP encryption the
Composite Video and S-Video outputs will not display an
image.

Connection Diagram

Specifications
Input port 1 x HDMI type A, 1 x USB type-B
Output Ports 1 x HDMI type A, 1
x Coaxial,
1 x Stereo R/L RAC jack,
1 x Composite-Video RCA jack,
1 x S-Video
Power Supply 5V / 2.6A DC (US/EU standards, CE/FCC/UL
certified)
Dimensions 102mm(W) x 146.5mm(D) x 25mm(H)
Weight 302g
Chassis Material Aluminum
Silkscreen Color Black
Operating Temperature 0°C ~ 40°C / 32°F ~104°F
Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity 20~90% RH (non-condensing)
Power Consumption 3.5W