Cooper Lighting VFM Vision AVU050932 User manual

AVU050932
VFM VISION
FLOOD MEDIUM
ACCESSORIES
Consult your representative for additional options and finishes.
www.cooperlighting.com
TM
DESCRIPTION
AIMING RANGE
The Vision Flood Medium (VFM) lower knuckle slip-fits over a standard 2"
pipe size (2 3/8" O.D.) tenon. VFM can be mounted to the following
accessories: Surface Mount Tenon (SMT), Stanchion Mount Tenon (ST), Twin
Mount Arm Tenon (TMT), and Wall Mount Arm Tenon (WMT).
Catalog # Type
Project
Comments
Prepared by Date
190°
[SMT]
190°
[ST]
[WMT]
190°
[TMT]
190°
190°
[750HPS-RTMT]
190°
[750HPS-RSLT]
ACCESSORIES SPECIFICAITONS
STANCHION MOUNT TENON [ST]
Used to mount fixture above grade to solid
surface, or partially buried when secured to
concrete pad. Cast luminum housing and
mounting plate is 18" tall and is supplied with
astandard 2" pipe size (2 3/8" O.D.) tenon.
TWIN ARM MOUNT TENON
[VFM-TMT]
Soft form extruded aluminum arm is 42" in
length and features two (2) standard 2" pipe
size (2 3/8" O.D.) tenons for twin fixture
mount. Other lengths and drilling patterns
available upon request. Twin arm base slip
fits over standard 2" pipe size (2 3/8" O.D.)
tenon. End caps are removable for wiring
access. Useful in ground mount and pole
mount applications.
WALL MOUNT ARM TENON [WMT]
Extruded aluminum arm with cast mounting
plate is 15" in length and is supplied with a
standard 2" pipe size (2 3/8" O.D.) tenon. Also
useful as an armextension offsquarearea
light pole.
REMOTE SINGLE MOUNT TENON
[750HPS-RSLT]
Intended for 750W HPS applications only.
For above grade surface mount placement,
the 750HPS-RSLT is supplied with a 4" tall
standard 2" pipe size (2 3/8" O.D.) tenon.
Base slip fits over standard2" pipe size
(2 3/8" O.D.) tenon. Electrical components are
packaged on a slide out tray,and housed in
an extruded aluminum enclosure with
removable die-cast end plates.
REMOTE TWIN ARM MOUNT TENON
[750HPS-RTMT]
Intended for 750W HPS applications only.
Electrical components are packaged on a
slide out tray, and housed in an extruded
aluminum enclosure with removable die-cast
end plates. Arm features two (2) standard 2"
pipe size (2 3/8" O.D.) tenons for twin fixture
mount. Twin armbase slip fits over standard
2" pipe size (2 3/8" O.D.) tenon. Useful in
ground mount and pole mount applications.
18"
[457 mm]
4" [102mm]
23/8" [60 mm]
5/16"
[8 mm]
Dia.
6" [152 mm]
Sq. Bolt Pattern
4"
[102 mm] 42" [1067 mm]
3/4" [20 mm] Dia.
5"
[127 mm]
Sq. Bolt Pattern
15"
[381 mm]
4"
[102 mm]
Stanchion Mount Tenon
[ST]
Wall Mount ArmTenon
[WMT]
Twin ArmMount Tenon
[VFM-TMT]
4 1/2"
[114 mm]
20" [511 mm]
2 3/8" [60 mm] Dia.
4 1/2"
[114 mm]
42" [1067 mm]
2 3/8" [60 mm] Dia.
Remote Twin Arm
Mount Tenon
[750HPS-RTMT]
Remote
Single Mount Tenon
[750HPS-RSLT]
SURFACE MOUNT TENON [SMT]
For above-grade surface mount
placement, the SMT is supplied with a
4" tall standard 2" pipe size (2 3/8" O.D.)
tenon.
5/16" Dia.
[8 mm] 4"
[102 mm]
61/2"
[166 mm] Sq. 5" [127 mm]
Surface Mount Tenon
[SMT]

AVU050932
INVUE • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL [phone] • FAX [phone]
VFM VISION FLOOD MEDIUM ACCESSORIES
ACCESSORIES SPECIFICAITONS (CON’T.)
4-SIDED SHIELD
Controls lamp glare and spill light in all
directions. Useful when aiming direction or
intended target lies in close proximity to
pedestrian and/or motor vehicle activity.
Mounts to accessory channel in doorframe.
Compatible with all distributions. Available
on VFM only.
BARN DOORS
Four (4) independently mounted and
adjustable doors control cutoff angles in all
directions, allowing custom distribution
control for any application. Compatible with
all distributions.
VANDAL SHIELD
3/16" thick molded polycarbonate convex
lens. Treated with UV inhibitor to discourage
the gradual discoloration that results from
exposure to sunlight and metal halide lamps.
4-Sided Shield Barn Doors
Vandal Shield
Top Visor
External Grid Louvers
EXTERNAL GRID LOUVERS
Designed to control lamp glare and spill light
while maintaining beam efficiency.Useful
when aiming direction or intended target lies
in close proximity to pedestrian and/or
motor vehicle activity.Mounts to accessory
channel in doorframe. Finished in black
powder coat paint. Compatible with all
distributions. Available on VFM only.
TOP VISOR
Controls excess spill and glare on top
portion of distribution. Especially useful in
uplighting applications to limit light travel
above intended wall surface or sign. Mounts
to accessory channel in doorframe.
Compatible with all distributions.