Cooper Lighting LUMIERE DBY User manual

ACCESSORIES: JUNCTION BOXES
1082
LUMIERE®
COOPER LIGHTING
`
DESCRIPTION
ORDERING INFORMATION
SAMPLE NUMBER: MB1-BK
Order junction boxes as separate line items. Specify quantities and (if applicable) finish.
DBY DESCRIPTION
2" x 2-5/8" (51mm x 67mm)
Use with low voltage fixtures only
Direct burial, watertight wiring kit. For
through wiring of low voltage cable.
Constructed from injection-molded
plastic.
MB1-xx* DESCRIPTION
4-7/8" x 2" (124mm x 51mm)
Use with line voltage or low voltage fixtures
Rectangular, above ground junction box
for surface or recessed mounting. It
accepts Lumière's FS1 or FS2 fixture
mounting covers (not included).
Constructed from die-cast aluminum.
Specify finish (BK, BZ, CS, VE, WT).
MB2-xx* DESCRIPTION
6-1/2" x 2-7/8" (165mm x 73mm)
Use with line voltage or low voltage fixtures
Round, below grade junction box and
cover for inground installation.
Constructed from cast iron.
Specify finish (BK, BZ, CS, VE, WT).
MBR1-xx* DESCRIPTION
4-1/8" x 1-5/8" (105mm x 41mm)
Use with line voltage or low voltage fixtures
Round, above ground junction box for
surface or recessed mounting. It accepts
Lumière's RS1 or RS2 fixture mounting
covers (not included). Constructed
from die-cast aluminum.
Specify finish (BK, BZ, CS, VE, WT).
Lumière offers junction boxes to meet virtually any landscape lighting application.
*Replace xx with corresponding finish.