Cooper Lighting Fail-Safe PAL User manual

Catalog #
Project
Comments
Prepared by
Type
Date
SPECIFICATION FEATURES
04/10/2007 11:53:37 AM
Consult your representative for additional options and finishes.
Specifications and Dimensions subject to change without notice.
ADC041463
SIDE DIMENSIONS
DESCRIPTION
The Fail-Safe Work PAL combines strength and energy-saving technology
with the convenience of a handle, heavy duty magnet for easy mounting,
cord and plug to create a durable and easily transportable work area light.
Its angled facets with radius corners actually increase the ability of the lens
to deflect blows and absorb impact. An extra thick, injection molded
polycarbonate lens incorporates an optical design that obscures the lamp
image and spreads light evenly, providing excellent light output from low
positions, while minimizing glare. U.L. listed and C.S.A. certified for wet
locations.
A ... Lens
One piece injection molded UV
stabilized polycarbonate, min.
0.130" thick. All light control prisms
and blondels are on the inside
surface of the lens, reducing dirt
build-up and making cleaning
easier.
B ... Fasteners
Four stainless steel screws are
recessed into lens to maximize
tamper-resistance. Fasteners are
captive in the lens and sealed by
means of a neoprene O-ring.
C ... Reflector
16 ga. CRS with white high
reflectance polyester powder coat
finish.
D ... Handle
Cast aluminum handle features an
ergonomic design for comfortable
holding and a recessed notch for
easy hanging.
E ... Housing
Die-cast aluminum with reinforcing
ribs on exposed sidewalls.
Thickened areas occur at lens
junction and at mounting/fastening
holes. Four 1/4" dia. fasteners are
required to secure lens to housing.
F ... Socket
Porcelain medium base socket with
nickel-plated brass screw shell.
Shock absorbing socket bracket
protects lamp from impact.
G ... Lamp
100 watt high pressure sodium or
100 watt metal halide. (By others)
H ... Gasket
One piece die-cut gasket seals
entire lens and housing.
I ... Ballast
Copper-wound, core and coil,
Normal Power Factor ballast.
J ... Cord and Plug
Six foot, jacketed three wire cord
and plug is grounded for additional
safety.
PAL
PORTABLE
AREA LIGHT
100W
High Pressure Sodium
Metal Halide
POLYCARBONATE
9" SQUARE LUMINAIRE
WITH HANDLE
Portable Work Light
D
B
EA
C
F
G
J
K
H
9'' Sq.
[229mm]
11"
[279mm]
8 3/4" [222mm]
4 11/16"
[119mm]
3 1/8"
[80mm]
E N E R G Y D A T A
100 Watts HPS
118 Watts (Input Watts)
100 Watts MH
129 Watts (Input Watts)
FAIL-SAFE®

Fail-Safe • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL [phone] • FAX [phone]/2007 11:53:37 AM
Specifications and Dimensions subject to change without notice.
ADC041463
PHOTOMETRICS
ORDERING INFORMATION
PORTABLE AREA LIGHT
PAL
Candlepower Distribution
Test No. 766670
HPEC-100N-120V-PAL
Lamp=100W HPS
Lumens=9500
4
3
2
1
0
1
2
3
4
4 3 2 1 0 1 2 3 4
A B C D E F
Footcandle Table
Select mounting height and read across for footcandle values
of each isofootcandle line.
Mounting
Height Footcandle Values for
EC-2 Isofootcandle Lines
A B C D E F
6' 22.50 11.25 4.50 2.25 1.13 0.45
9' 10.00 5.00 2.00 1.00 0.50 0.20
12' 5.63 2.81 1.13 0.56 0.28 0.11