Cooper Lighting INVUE Entri Series User manual

TM
ENTRI Series ARCHITECTURAL WALL LUMINAIRE

ARCHITECTURAL WALL LUMINAIRE
ENTRI Series
DOWN MOUNT
– Walkways
– Entryways
– Wall Surfaces
– Parking Areas
– Roadways
UP MOUNT
– Canopies
– Ceilings
– Cornices + Columns
– Wall Surfaces
- Architectural Highlights
MODULAR FORM AND APPLICATION
ENTRI Series’ family of modular faceplate designs provide a tasteful architectural statement equally
suitable for indoor and outdoor environments. Available luminous faceplate window adds a
signature look, while affording custom color capability.
EXCEPTIONAL CONSTRUCTION
Designed to sustain a lifetime of tough environmental conditions, ENTRI Series’ precisely
engineered die-cast aluminum housing and faceplates integrate IP66 rated gasketing
strategies that combined with a 5 stage premium TGIC polyester powder coat finish,
seal out performance degrading contaminants.
OPTICAL FLEXIBILITY
Whether providing community friendly full cutoff performance in downlighting applications, or
showcasing architectural features through available up or up/down combination configurations,
the ENTRI Series provides a palette of optical solutions to paint
any surface in the right light.

3
ENTRI Series Architectural Wall Luminaire
UNIVERSAL MOUNTING
The ENTRI Series symmetrical form can be mounted either Up
or Down with no modifications to the door or housing.
DOWNLIGHT UPLIGHT DOWNLIGHT + UPLIGHT
- Downlight
- Uplight
- Downlight + Uplight

4
ENTRI Series Architectural Wall Luminaire
FACEPLATES
A choice of six (6) architectural faceplate designs allows the matching of fixture style to surrounding environment.
MODULAR FORM
ENC ENC-LG
ENV ENV-LG
ENT ENT-LG

- Full Cutoff Performance
- Lamp Options
- Color Capabilities
OPTICAL SYSTEMS
5
ENTRI Series Architectural Wall Luminaire
Emerging trends in light control and environmental preservation
require innovative design solutions. ENTRI Series responds.
FULL CUTOFF PERFORMANCE
As the nations’ respected authority on lighting standards and
design recommendations the IESNA, Illuminating Engineering
Society of North America, defines four (4) unique luminaire
cutoff classifications to quantify the amount of light a
fixture directs upward toward the sky.
In downlight only applications, each of the available
ENTRI Series optical systems meets the strictest "Full Cutoff"
classification requirements, insuring that zero measurable
light is directed upward from the luminaire.
ALLOWABLE CANDELA @ 90°@ 80°
Full Cutoff 0 10%
Cutoff 2.5% 10%
Semi-Cutoff 5% 20%
Non-Cutoff No Limit No Limit
FULL CUTOFF
Full cutoff luminaires carry the endorsement of the International Dark
Sky Association (IDA) for their usefulness in limiting the detrimental
effects of sky glow, otherwise referred to as light pollution.
When faced with local or state adopted lighting ordinances, full cutoff
luminaires offer direct compliance in most all circumstances.
COMPLIANT Full Cutoff
DARK SKY FCO
ENTRI Series presents an attractive alterative
to traditional refractive based non-cutoff wall
pack luminaires, which generate considerable
amounts of glare while providing a less
appealing form.
0°
90°

6
ENTRI Series Architectural Wall Luminaire
COLOR CAPABILITIES
ENTRI faceplates can be enhanced by specifying the colored luminous insert option.
Colored gel films are internally secured behind the glass insert, providing easy access for
replacement or color changes. Standard colors include: Deep Green, Bright Blue, Red, and
Warm Orange. Other colors available, consult your INVUE Lighting Systems representative
for more information.
T6 METAL HALIDE
FEATURES: Produces a whitish-blue
light with excellent color rendition—
up to 95 CRI, high efficacy (lumens
per watt) and superior color consistency.
For optimal efficacy and operating
characteristics specify along with
optional electronic ballast.
APPLICATION: Generally, Metal Halide
sources best compliment concrete
surfaces, light-colored masonry, foliage,
and bright colored objects or surfaces.
WHITE SON HPS
FEATURES: Produces a warm 2500K
color temperature light source with an
80 CRI, high efficacy (lumens per watt),
and long life.
APPLICATION: Adds a richness and
warmth that best compliments brick,
wood, and dark-colored masonry or
stone surfaces.
COMPACT FLUORESCENT
FEATURES: Energy conscious with
excellent lumen maintenance. Available
in a variety of color temperatures to suit
varying applications.
APPLICATION: Compact Fluorescent
sources can be used in indoor or
outdoor environments to compliment
any surface finish or environment.
QUARTZ HALOGEN
FEATURES: Ideal color rendition and
a warm inviting color.
APPLICATION: Quartz Halogen sources
can be used in indoor or outdoor
environments to compliment any
surface finish or environment.
LAMP OPTIONS
ENTRI Series optical systems are offered with a variety of high efficiency lamp sources.
ENC | ENV | ENT
Metal Halide 39, 70, 100, 150W
White Son HPS 100W
Compact Fluorescent 26, 32, 42, 57W
Dual Compact Fluorescent (2) 26, (2) 32, (2) 42W
Quartz Halogen 100, 150, 250W
AVAILABLE LAMP OPTIONS PER
HOUSING
ELECTRONIC BALLASTS
Available electronic HID ballasts improve
fixture efficiency, performance, and value.
Benefits include a 30-50% improvement
in lumen maintenance over conventional
magnetic ballasts, greatly improved
color consistency, internal fusing and a
reduction in total system energy usage.

- Flawless Facets
- Rigid Construction
- Premium Materials
- Frosted Lens
OPTICAL EXCELLENCE
INVUE’s commitment to optical research and precision build quality
result in unequaled levels of performance and repeatability.
FLAWLESS FACETS
Reflector facets on the ENTRI Series segmented optical modules
are flat and unobstructed, allowing for a perfect reflection of the
lamp’s arctube. All segment faces are clean of rivet heads, tabs,
or other means of attachment which may cause streaking on the
wall, ground, or ceiling surface.
RIGID CONSTRUCTION
A rigid box enclosure shields optical facets
on all sides from performance degrading
damage. Each facet bank is secured to both
top and bottom of the enclosure for
repeatable facet orientation relative to
light center.
7
ENTRI Series Architectural Wall Luminaire

8
ENTRI Series Architectural Wall Luminaire
PREMIUM MATERIALS
A commitment to using premium 95% reflective aluminum sheet on all
segmented optical systems allows for efficiency gains of up to 10%.
PREMIUM MATERIAL
Premium material reflects a higher intensity
of light in a more controllable fashion.
STANDARD MATERIAL
Standard material reflects a lower intensity of light.
FROSTED LENS
Available frosted lens reduces fixture brightness while visually softening the
light distribution. Particularly useful in low mounting height applications, and
in public environments where pedestrians may have direct line-of-sight
exposure to lamp brightness. Distributions featuring a 10% secondary glow
utilize a standard frosted lens to achieve a soft, even glow.
95%
100%
ENTRI's Premium 95% Reflective Surface
100%
Competitor's Standard 86% Reflective Surface
86%

OPTICAL CONFIGURATIONS
TEN (10) UNIQUE OPTICS
ENTRI Series offers a versatile family of high performance distribution patterns to suit varying design goals. With ten (10) unique optical selections
featuring down only, up only, and up/down combinations, the ENTRI Series provides targeted lighting solutions for wall, roadway, canopy,
architectural highlighting, and more.
TYPE III [3S, 3SG, 3SP]
In downlighting applications, the Type III optic is ideal for indoor or outdoor lighting of corridors,
walkways, and general areas. In uplighting applications, the Type III evenly illuminates canopies, ceilings,
and overhangs. Available 10% secondary glow provides soft even illumination, while available pencil
distribution provides a sharp 4° spike of light
11
ENTRI Series Architectural Wall Luminaire
FORWARD THROW [FT, FTG, FTP]
In downlighting applications, the FT can provide illumination well into indoor entryways, or outdoor
roadways and parking areas commonly adjacent to building surfaces. In uplighting applications, the
Type IV provides exceptional forward throw to evenly illuminate large canopies, ceilings and overhangs.
Available 10% secondary glow provides soft even illumination, while available pencil distribution provides
a sharp 4° spike of light.
FX GRAZING OPTIC [FX, FXF]
The FX optic provides a narrow band of light that has exceptional side throw along the building surface
to maximize fixture spacings. Intended to graze the vertical surface, this optic accentuates architecture
by creating shadows and bold contrasts. Available 50/50 FXF wall grazing optic provides up/down
grazing illumination. Integral optical louvers minimize surface brightness on wall surface immediately
above (or below) the fixture aperture.
TIGHT SPOT [TS, TSF]
The Tight Spot optic is designed to produce an extremely tight vertical beam of light while eliminating all
spill light immediately outside the main beam. In up or downlighting applications, this concentrated
beam is ideal for highlighting columns and other vertical design elements. Available 50/50 TSF tight spot
optic provides up/down column illumination. Integral optical louvers minimize surface brightness on wall
surface immediately above (or below) fixture aperture, and control unwanted spill light.
COMPACT FLUORESCENT [CFM, CFG]
In downlighting applications, the CFM optic provides a general Type III distribution ideal for indoor or
outdoor lighting of corridors, walkways, and general areas. In uplighting applications, the Type III evenly
illuminates canopies, ceilings, and overhangs. Available with single 26, 32, 42, or 57W lamp, or dual 26,
32, or 42W lamps. Available 10% secondary glow provides soft even illumination.

12
ENTRI Series Architectural Wall Luminaire
OPTICAL CONFIGURATIONS
3S [Downlight] 3S [Uplight] 3SG 3SP
FT [Downlight] FT [Uplight] FTG FTP
FX [Downlight] FX [Uplight] FXF
TS [Downlight] TS [Uplight] TSF
CFM [Downlight] CFM [Uplight] CFG

13
ENTRI Series Architectural Wall Luminaire
- IP Rating
- Egress Emergency Lighting
- Dual Switching Control
FIXTURE SEALING
ENTRI Series luminaires provide unsurpassed levels of protection
against entry of airborne contaminants. With a IP66 fixture rating
in both up and down mounting applications, dust, insects, and
moisture simply have no chance of penetrating the
fixture’s outer enclosure.
IP RATING
"IP" stands for Ingress Protection and is a rating system established by
the European organization IEC, International Electrotechnical
Commission. Over 50 countries strong, this organization publishes
international standards for electrical products and other related
technologies. The two numbers proceeding the "IP" individually callout
the fixture’s protection ratings against solid objects (such as airborne
particulates) and moisture respectively.
I P 6 6
Ingress Protection Complete No moisture
protection within fixture
against after a constant
dust entry 100L/min. high pressure
jet spay from all
practical directions

14
ENTRI Series Architectural Wall Luminaire
EGRESS EMERGENCY LIGHTING
ENTRI Series offers (3) additional egress
options which provide immediate light
output upon power system reactivation.
SINGLE 26, 32, 42, 57W CFL
DUAL 26, 32, 42W CLF
Fluorescent lamp source(s) combined
with electronic ballast achieves full
brightness within seconds of
reactivation.
QAB
Auxiliary quartz lamp and optic
mounted in accessory adapter box.
Quartz lamp energizes upon power
reactivation and extinguishes once
HID lamp re-ignites.
EMAB
Auxiliary quartz lamp and optic
mounted in accessory adapter box.
Quartz lamp energizes upon cold start
and power reactivation, extinguishing
once HID lamp has achieved partial
brightness.
EGRESS
EMERGENCY LIGHTING
ENTRI Series offers (2) unique solutions
to provide uninterrupted illumination to
the Path of Egress under emergency
conditions.
CF/EMAB
Internal battery pack located in
accessory adapter box supplies 60%
of the lamp’s initial rated lumens for a
period of ninety minutes in the event
of power failure. Battery supplies power
to single or dual 26, 32,or 42W
Compact Fluorescent lamps. Features
externally accessible LED status
indicator light and battery test switch
for system checks.
EM/SCAB
Auxiliary quartz lamp and optic
mounted in accessory adapter box.
Socket is wired to separate relay
controlled emergency power source.
DUAL SWITCHING CONTROL
[DSAB]
For applications requiring curfew
compliance through reduced lighting
levels and power systems draw, ENTRI
offers the DSAB dual switching option.
Utilizing dual Compact Fluorescent
lamps and independent ballasts,
total luminaire output and power
consumption can be reduced by 50%.

- Features + Benefits
PRODUCT SPECIFICATIONS
15
ENTRI Series Architectural Wall Luminaire
OPTICAL SYSTEMS
Choice of ten (10) high efficiency optical systems constructed of premium 95% reflective
anodized aluminum sheet, or bright specular anodized polished spun aluminum. Available
distributions include Type III, Type III with 10% secondary glow, Type III with 4˚ pencil
secondary, Forward Throw, Forward Throw with 10% secondary glow, Forward Throw with
4˚ pencil secondary, FX grazing optic, FXF 50% up/50% down grazing optic, Tight Spot,
and 50% up/50% down Tight Spot. Optical segments are rigidly mounted inside a heavy
wall aluminum housing for superior protection. All segment faces are clean of rivet heads,
tabs, or other means of attachment which may cause streaking in the light distribution.
All reflector modules feature quick disconnect wiring plugs. T6 Metal Halide lamps feature
G12 lampholders, White SonTM High Pressure Sodium lamp features a GX12 lampholder,
Quartz Halogen lamps feature mini-can screw based lampholders, and Compact Fluorescent lamps
feature GX24q-(3,4,5) 4-pin lampholders.
MOUNTING
Standard zinc plated attachment plate mounts directly to 4" J-Box. Fixture slides over mounting plate and is
secured with two (2) concealed stainless steel fasteners. Mounting plate features one-piece, EPDM gaskets on
either side of plate to firmly seal fixture to wall surface, forbidding entry of moisture and particulates. Optional
mounting arrangements utilize a die-cast aluminum adapter box to allow for surface conduit wiring, quartz lamp
options, and emergency battery pack capability.
HOUSING
One piece die-cast aluminum construction for precise tolerance control and repeatability in manufacturing.
Accommodates either up or down mounting configurations with no modifications. Downlight and uplight lens’
are impact resistant 5/32" thick tempered clear or frosted flat glass, sealed to the housing with high strength
VHB adhesive tape and a continuous silicone bead gasket. Silicone wireway plug on housing back wall seals
incoming electrical leads to prevent moisture or dust entry.
FACEPLATE
One piece die-cast aluminum faceplate utilizes a continuous silicone gasket to seal
securely to housing. Side hinged faceplate swings open via release of one (1)
flush mount die-cast aluminum latch on housing side panel. Available luminous glass
insert is .16" thick frosted glass, secured to back of faceplate with a continuous EPDM
gasket. Available colored gel film secures behind glass.

16
ENTRI Series Architectural Wall Luminaire
DIMENSIONS [ENC | ENV | ENT]
ELECTRICAL COMPONENTS
Ballast and related electrical componentry
are heat sunk to the housing for cooler
operation and prolonged life.
FINISH
Housing finished in a 5 stage premium TGIC
polyester powder coat paint, 2.5 mil nominal
thickness for superior protection against fade
and wear. Standard colors include black,
bronze, grey, white, dark platinum, and
graphite metallic. RAL and custom color
matches available. Consult your INVUE
Lighting Systems Representative for more
information.
IP66 Rated U.L. 1598 Listed
CSA Listed 25°C Ambient ISO 9001
Certifications
7 3/4"
[196 mm]
15 25/32" [400 mm] 8 1/8" [206 mm]
7 3/4"
[196 mm]
15 25/32" [400 mm] 8 1/8" [206 mm]

19
ENTRI Series Architectural Wall Luminaire
- Specifications + Dimensions
MOUNTING OPTIONS SPECIFICATIONS
THRU-WAY BOX
Die-cast aluminum thru-way box provides means for surface mount conduit runs
through 3/4" clearance holes on either side of casting. Box attaches to 4" J-Box or
direct to wall surface. Finished to match luminaire.
QAB/EMAB/EM/SCAB ADAPTER BOX
Die-cast aluminum adapter box features a stand alone T4 Halogen lamp and optic
for emergency applications. Also allows for 3/4" surface mount conduit runs.
Finished to match luminaire.
CF/EMAB ADAPTER BOX
Die-cast aluminum adapter box houses a Compact Fluorescent emergency battery
pack. Features externally accessible LED status indicator light and battery test switch
for system checks. Also allows for 3/4" surface mount conduit runs. Finished to
match luminaire.