Cooper Lighting MCGRAW-EDISON BRC User manual

PATHWAYS
1196 COOPER LIGHTING
MCGRAW-EDISON®
• Aluminum top provides
rapid heat dissipation
• Impact-resistant clear acrylic
lens measures 1/4" thick
• Lower dispersing reflector
combines with truncated
octagonal upper collecting
reflector to provide low-
glare, efficient illumination
• Seamless aluminum tube
lifts off base for easy access
to ballast. Finished in
weather- and abrasion
resistant polyester powder
coat
• Quick-disconnect ballast
located at housing base.
Ballast assembly mounted
on bracket and secured to
base with two screws
• Rugged cast-aluminum
base is completely sealed
• Medium-base porcelain
socket
• Approximate net weight:
26 lbs. (12 kgs.)
BSC / BRC
BOLLARD
26-100W
Metal Halide
High Pressure Sodium
Compact Fluorescent
Incandescent
PATHWAY LUMINAIRE
NOTES: 1 All lamps are medium-base. 235W HPS available in 120V only. 3Compact Fluorescent only Electronic ballast universal voltage 120-277V. 4Nominal length not
to exceed 7". 5Product also available in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering information. 6Multi-Tap
ballast is 120/208/240/277V wired 277V. 7Triple-Tap ballast is 120/277/347V wired 347V. 8Other finish colors available, including a full line of RAL color matches.
Consult your Cooper Lighting Representative. 9Add as suffix in the order shown. 10 Location of R1 and R2 option on housing subject to height of luminaire.
11 Available with BSC only. 12 CF lamps only, rated minimum operating temperature 32° F (0° C). 13 Coated lamp standard. Must specify clear lamp if desired.
14 Specifications and dimensions subject to change without notice.
DIMENSIONS
DESCRIPTION
The McGraw-Edison BSC / BRC
Bollard, available in heights from
24" to 42", has crisp, clean lines
which blend with any architectur-
al setting. Constructed of seam-
less, heavy-duty aluminum and
finished with tough polyester
powder coat, the Bollard is
gasketed to seal out external
contaminant’s. U.L. 1598 listed
and CSA certified for wet
locations.
Options 9
F=Single Fuse (120, 277 or 347V)
FF=Double Fused (208 or 240V)
R1=Provisional Cut for GFI Receptacle 10
R2=Installed GFI Receptacle 10
PL=Polycarbonate Lens 11
CF/EM=Emergency Battery Pack 12
L=Lamp Included 13
ORDERING INFORMATION
SAMPLE NUMBER: BSC-36-100-MH-MT-BK
Product Family
BSC=Square
Bollard
with Clear
Lens,
& Square
Top
BRC=Round
Bollard
with Clear
Lens,
& Cylindrical Top
Lamp
Wattage
HID 1
35=35W 2
50=50W
70=70W
100=100W
150=150W
175=175W
Compact
Fluorescent 3
26=26W
32=32W
42=42W
Fixture
Height
24=24"
28=28"
32=32"
36=36"
42=42"
Lamp Type
MH=Metal Halide
HPS=High
Pressure
Sodium
CF=Compact
Fluorescent 4
IC=Incandescent
Voltage 5
120=120V
208=208V
240=240V
277=277V
MT=Multi-Tap 6
TT=Triple-Tap 7
UNV=Universal
120-277V 3
Color 8
BK=Black
AP=Grey
BZ=Bronze
WH=White
DP=Dark Platinum
GM=Graphite Metallic
Options &
Accessories
(See Below)
42"
(1067mm)
36"
(914mm)
32"
(813mm)
28"
(711mm)
24"
(610mm)
8" (Rd.)
(203mm)
7" (Sq.)
(178mm)