12 STREETWORKS Outdoor Lighting Solutions Cooper Lighting
NOTE: 1 Arms not included. Order Separately. See accessories. 2All HID lamps are mogul-base. 3320 and 350W Pulse Start Metal Halide only. 4400W MH requires reduced envelope ED28 Lamp. 5Electrodeless Fluorescent QL
lamp only. Available in vertically lamped optical systems and Type 3S and 5S distribution only. 120V only. 6Refer to technical section for lamp/ballast/voltage compatibility. 7Vertical lamp option only. Maximum wattage of
250W HID. 8SLE only available with Solid Mid selection or with NG option. 9Custom and RAL color matching available upon request. Consult your Cooper Lighting Representative for more information. 10 Quartz options
not available with SL optic or vertical lamped optical systems. 11 Dual switching requires dual 57W or dual 70W Compact Fluorescent lamps, and allows independent switching control of each lamp through use of two (2)
electronic ballasts. Allows 50% power reduction when dual ballasts are independently wired and controlled. 12 House side shield available on horizontally lamped 2S, 3S, and 4S optical systems only. 13 NG option retains
daytime appeal of window, louvered, slot, solid rings, or luminous rings mid section styles, but does not allow light into the upper chamber of the housing. Mid section will not glow at night, maintaining the cutoff
control associated with the standard solid mid section. 14 Requires use of 4" O.D. round straight pole. 15 Finials compatible with Traditional Arms only. 16 Not compatible with finials.
TOP
Cast aluminum housing maintains
sidewall thickness and attaches to
mounting arm hub with four (4)
stainless steel fasteners.
MIDSECTION
Milky white acrylic lens utilizes
continuous silicone gaskets to seal
lens to top casting and shade.
Optional colored luminous rings
are available.
SHADES
Heavy gauge precision spun
aluminum shades offer superior
surface finish and consistency in
form.
DOORFRAME ASSEMBLY
Die-cast aluminum 1/8" thick door
and doorframe seal to underside of
shade with a thick wall continuous
silicone gasket.
OPTICAL SYSTEMS
Choice of five (5) high efficiency
segmented optical systems
constructed of premium 95%
reflective anodized aluminum sheet.
ELECTRICAL TRAY
Ballast and related electrical
componentry are mounted to a
reinforced one piece tray with
integral handle. Quick disconnect
wiring plugs allow easy tray
removal during routine
maintenance.
FINISH
Housing finished in a 5 stage
premium TGIC polyester powder
coat paint, 2.5 mil nominal
thickness for superior protection
against fade and wear. Standard
colors include black, bronze, grey,
white, dark platinum, graphite
metallic, and hartford green.
RAL and custom color matches
available. Consult your Streetworks
Representative.
ORDERING INFORMATION
SAMPLE NUMBER: MEL25MWW2SXSWBK
BALLAST TYPE 6
C=CWI
H=Reac./HPF
K=10KV CWA
N=Hi. Reac./NPF
P=Hi. Reac./HPF
R=Reac./NPF
W=CWA
I=Induction
DECORATIVE AREA COLLECTION
OPTIONS (add as suffix)
1=Single Fuse
2=Double Fuse
C=Emergency Quartz—Separate Circuit 10
D=Dual Fluorescent Switching Control 11
E=Emergency Quartz with Time Delay 10
F=Frosted Flat Glass
H=House Side Shield 12
L=Lamp Included
Q=Quartz Standby 10
R=Frosted Sag Glass
S=Sag Glass
PMT=Post Mount Tenon
PM-PCR=NEMA Type Photocontrol Receptacle
(Post Mount Only)
NG=No Glow Luminous Mid Section 13
ACCESSORIES (order separately/replace XX with color suffix)
MEL Modern Epic Large Arms
[see page 14-15 for details on arm accessories]
SA6005-XX=MEL Bishop Single Pole Mount Arm
SA6006-XX=MEL Bishop Single Pole Mount Arm with
Cross Rod
SA6007-XX=MEL Bishop Twin Pole Mount Arm
SA6008-XX=MEL Bishop Twin Pole Mount Arm with
Cross Rods
SA6009-XX=MEL Traditional Single Pole Mount Arm
SA6010-XX=MEL Traditional Single Pole Mount Arm
with Rounded Upper Bar
SA6011-XX=MEL Traditional Single Pole Mount Arm
with Rounded Lower Bar 14
SA6012-XX=MEL Traditional Single Pole Mount Arm
with 45° Upper Bar
SA6013-XX=MEL Traditional Single Pole Mount Arm
with 45° Lower Bar 14
SA6014-XX=MEL Traditional Single Pole Mount Arm
with 45° Upper Strap
SA6016-XX=MEL Traditional Twin Pole Mount Arm
SA6017-XX=MEL Traditional Twin Pole Mount Arm
with Rounded Upper Bars
SA6018-XX=MEL Traditional Twin Pole Mount Arm
with Rounded Lower Bars 14
SA6019-XX=MEL Traditional Twin Pole Mount Arm
with 45° Upper Bars
SA6020-XX=MEL Traditional Twin Pole Mount Arm
with 45° Lower Bars 14
SA6021-XX=MEL Traditional Twin Pole Mount Arm
with 45° Upper Straps
SA6022-XX=MEL Tenon Adapter for 2 3/8" O.D. Horizontal
Tenon
CEL Modern Epic Large Arms
[see page 14-15 for details on arm accessories]
SA6054-XX=CEL Bishop Single Pole Mount Arm
SA6055-XX=CEL Bishop Single Pole Mount Arm
with Cross Rod
SA6056-XX=CEL Bishop Twin Pole Mount Arm
SA6057-XX=CEL Bishop Twin Pole Mount Arm
with Cross Rods
SA6058-XX=CEL Traditional Single Pole Mount Arm
SA6059-XX=CEL Traditional Single Pole Mount Arm
with Rounded Upper Bar
SA6060-XX=CEL Traditional Single Pole Mount Arm
with Rounded Lower Bar 14
SA6061-XX=CEL Traditional Single Pole Mount Arm
with 45° Upper Bar
SA6062-XX=CEL Traditional Single Pole Mount Arm
with 45° Lower Bar 14
SA6063-XX=CEL Traditional Single Pole Mount Arm
with 45° Upper Strap
SA6065-XX=CEL Traditional Twin Pole Mount Arm
SA6066-XX=CEL Traditional Twin Pole Mount Arm
with Rounded Upper Bars
SA6067-XX=CEL Traditional Twin Pole Mount Arm
with Rounded Lower Bars 14
SA6068-XX=CEL Traditional Twin Pole Mount Arm
with 45° Upper Bars
SA6069-XX=CEL Traditional Twin Pole Mount Arm
with 45° Lower Bars 14
SA6070-XX=CEL Traditional Twin Pole Mount Arm
with 45° Upper Straps
SA6071-XX=CEL Tenon Adapter for 2 3/8" O.D. Horizontal
Tenon
OA/RA1016=NEMA Photocontrol—Multi-Tap
OA/RA1027=NEMA Photocontrol—480V
OA/RA1201=NEMA Photocontrol—Multi-Tap (347V)
ACCESSORY OPTIONS (add as suffix to accessory)
M=Modern Finial 15
A=Architectural Finial 15
N=Nostalgic Finial 15
4=NEMA Twistlock Photocontrol Receptacle 16
PRODUCT
FAMILY 1
MEL=Modern
Epic Large
CEL=Classic
Epic Large
LAMP TYPE 6
M=Metal
Halide
S=High
Pressure
Sodium
Q=Induction
LAMP
WATTAGE
HID 2
15=150W
17=175W
25=250W
32=320W 3
35=350W 3
40=400W 4
Electrodeless
Fluorescent 5
55=55W
85=85W
VOLTAGE 6
2=120V
0=208V
4=240V
7=277V
8=480V
9=347V
K=120/277V
wired 120V
L=277/120V
wired 277V
N=Multi-Tap
Wired 277V
W=Multi-Tap
Wired 120V
DISTRIBUTION
MA=Milk White
Acrylic
Jar 7
2S=Type II
3S=Type III
4S=Type IV
5S=Type V
SL=Spill Light
Eliminator 8
SHADE TYPE
SW=Straight
Wide
BL=Bell
FL=Flute
MID SECTION
TYPE
X=Solid
(Standard)
1=Window
2=Louvered
3=Slot
4=Solid Rings
5=Luminous
Rings
Optional Mid
Section Type
6=Luminous Rings—Red
7=Luminous Rings—Bright Blue
8=Luminous Rings—Deep Green
9=Luminous Rings—Warm Orange
COLOR
(add as suffix/
must specify) 9
AP=Grey
BK=Black
BZ=Bronze
DP=Dark
Platinum
GM=Graphite
Metallic
GN=Hartford
Green
WH=White
OPTIONS +
ACCESSORIES
(See Below)
MEL/CEL EPIC LARGE 55-400W
MH/HPS/QL
DECORATIVE
EPA:
Effective Projective Area:
Flat Lens 1.55
Sag Lens 1.75
SHIPPING DATA
Approximate Net Weight:
50 lbs. (23 kgs.)
OPTIONS + ACCESSORIES [Must be listed in the order shown and separated by a dash]
STREETWORKS™IP65 RATED
NOTE: In all flat glass and solid mid sections
configurations only.
