OPTIONS (add as suffix)
1=Single Fuse, Internally Mounted (120 or 277V)
2=Double Fuse, Internally Mounted (208, 240, or 480V)
4=Photocontrol Receptacle
WH=White
BK=Black
BZ=Bronze
E=150W/100V/HPS Ballast
G=Borosilicate Glass Refractor (175W & below) 5
H=Plug-in Starter Receptacle
K=Level Indicator
M=MOV Lightning Surge Protector 6
P=Polycarbonate Refractor (250W Max.)
U=UL/CSA Listed
F=Flat Glass
112 STREETWORKS Outdoor Lighting Solutions Cooper Lighting
ROADWAY
ACCESSORIES (order separately)
RA1001=Cutoff Visor
OA/RA1013=Photocontrol Shorting Cap
OA/RA1014=120V Photocontrol
OA/RA1016=105V-285V Photocontrol
OA/RA1027=480V Photocontrol
OA1028=Field Installed PCR Kit
OA1216=TufGuard Vandal Shield
OVZ DROP LENS REFRACTOR 50-250W
MH/HPS/MERCURY
HOUSING
Die-cast aluminum housing and
latch. Standard grey polyester
powder coat finish. Other finish
colors available.
REFLECTOR
The optical system is a
hydroformed anodized aluminum
reflector with a Dacron polyester
filter.
DOOR
Die-cast aluminum door frame
with integral hinges for hands free
installation, relamping and
maintenance. ANSI wattage/source
label.
LENS
Removable prismatic refractor
for use with High Pressure Sodium,
Metal Halide and Mercury lamp
sources.
SOCKET
Adjustable mogul-base porcelain
socket.
BALLAST ASSEMBLY
Hard mounted ballast with
encapsulated starter for protection
from environmental abuse.
Standard two position tunnel type
compression terminal block. Three
position available.
MOUNTING
Two-bolt/one bracket slipfitter
with cast-in pipe stop and leveling
steps. Fixed-in-place birdguard seals
around 1 1/4" or 2" mounting arms.
NOTE: 1 150W units are for S55 lamp. 2Refer to technical section for lamp/ballast/voltage compatibility. 3Available in 120/240V dual voltage or single voltage only (120, 208, 240, 277 or 480V). 50-150W. 4Other distributions &
cutoffs available. Consult your Streetworks Representative. 5Acrylic is standard on units 50W through 150W HPS and 175W mercury. Glass standard for 200-250W. 6MOV option is not available for any system requiring
a three position terminal block (Example—240V with PCR wired 120V). In order for MOV option to function center terminal of three position terminal block must be connected to “Earth” ground.
ROADWAY LUMINAIRE
EPA:
Effective Projective Area: .85
SHIPPING DATA
Approximate Net Weight:
31 lbs. (14 kgs.)
OPTIONS + ACCESSORIES [Must be listed in the order shown and separated by a dash]
STREETWORKS™
ORDERING INFORMATION
SAMPLE NUMBER: OVZ50SR22E4
OPTIONS +
ACCESSORIES
(See Below)
PRODUCT
FAMILY
OVZ
LAMP WATTAGE
50=50W
70=70W
10=100W
15=150W 1
17=175W
20=200W
25=250W
LAMP TYPE 2
S=High Pressure
Sodium
V=Mercury
M=Metal Halide
BALLAST TYPE 2
C=CWI
H=Reac./HPF
K=10KV CWA 3
M=Mag. Reg.
N=Hi. Reac./NPF
P=Hi. Reac./HPF
R=Reac./NPF
W=CWA
VOLTAGE2
2=120V
0=208V
4=240V
7=277V
8=480V
9=347V
F=120/240 wired 120V
P=240 w/PCR wired 120V
W=Multi-Tap wired 120V
N=Multi-Tap wired 277V
V=Multi-Tap wired 240V
DISTRIBUTION4
2=Type II
3=Type III
CUTOFF4
D=MCO
E=MSCO
