Coopers of Stortford 10252 User manual

Patio Heater 10252 Instructions
v1.0: 10/11/15
Please keep these instructions in a safe place for future reference.
Always check for damage prior to using the heater. Any damage should be repaired properly by a
qualified service engineer. If experiencing any difficulty consult your local dealer.
Never carry out modifications to this product.
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience or knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Position the heater outside or in a large open area well away from any obstructions such as branches,
or where the heater is near objects that can be effected by heat, such as furniture, curtains or other
flammable objects.
Do not use near hot tubs or swimming pools.
Do not use where gas, petrol, paints etc. are stored.
This unit is for domestic use only, not for use on building sites or commercial property.
Use the heater in accordance with any applicable fire regulations.
To protect against electric shock, do not immerse cord, plug or appliance in water or any other liquid.
Unplug from outlet when not in use and allow the item to cool thoroughly before cleaning.
Do not operate appliance with a damaged cord or plug or after the appliance malfunctions in any
manner. We recommend that the power cord is not stored kinked or twisted, and that you regularly
check its condition.
Use the heater on a level, stable surface.
NEVER cover the item in any way.
Do NOT place under or near flammable materials such as curtains, draperies, shelves, loose wall
paper etc.
Do not use this appliance for any other use than the intended use it is designed for.
Take care not to drop the appliance as heavy impacts may cause internal damage.
Never use the heater where petrol, paint thinners or other highly flammable vapours, or high levels of
airborne dust may be present.
Do not expose the heater or power cable to rain or wet conditions.
Allow a distance of at least 1 metre from an adjacent wall and avoid installing the heater close to
power socket outlets.
NEVER touch the heater element for at least 15 minute after switching off.
Do not leave the heater unattended.
Do not use this heater with a programmable timer used to switch it on automatically.
Before switching the product on, make sure that the voltage of your electricity supply corresponds
with what is indicated on the rating label .This product is designed to operate on 220-240V~ 50Hz
Connecting it to any other source may cause damage or risk of electrical hazard.

Patio Heater 10252 Instructions
v1.0: 10/11/15
Part number
Description
Part number
Description
1
Control box
8
Lower tube
2
Control pull
9
Base cover
3
Straight tube
10
Base
4
Outer fastener
11
Washer
5
Upper tube
12
Screw L
6
Screw M6^12 (5
in this pack)
13
Cord clip
7
Mid tube

Patio Heater 10252 Instructions
v1.0: 10/11/15
Assembly:
Insert lower tube (8) through the hole of base cover (9) and (10) with the welded disc facing
downwards and the locating tongue in its seat in the base. Secure with washer (11) and L screw (12).
Connect mid tube (7) to the lower tube (8) and secure with two screws (6). Insert straight tube (3)
upwards inside of upper tube (5).
Screw outer fastener (4) on to upper tube (5).Then pull straight tube (3) upward from the inside of
upper tube (5). Then install upper tube (5) on mid tube (7). Secure with two screws (6).
Insert end of straight tube (3) into the hole on bottom of control box (1). Secure with screw (6).
Turn outer fastener (4) counter clockwise and adjust the unit to a desired height. Then fasten
clockwise.
Clip power supply cord with cord clips (13).
The head of the heater is adjustable up to 25 degrees. Adjust to desired angle.
Use:
Connect the mains cable to a suitable power socket.
Pull the control pull repeatedly to cycle through the following heat settings:
0 = Off
L = Low
M = Medium
H = High

Patio Heater 10252 Instructions
v1.0: 10/11/15
Instruction Manual for Wall Mounted Use
Please keep these instructions in a safe place for future reference.
Part List
Installation:
1. Prepare a cross head screw driver.
2. Drill 4 wholes positioned as shown above. Insert Plastic Plug (#4), (4 PCs totally) to the holes respectively. Align Wall
Bracket (#2) to the holes, and then fix it with Tapping Screw (#3).
3. Insert the wall bracket into the hole (Section C) of Control Box. Fix them with the Screw Knob M6*12 (#5).
Operations:
1. Plug in the unit to a socket. Make sure the power supply is same as rated.
2. Pull down the string to switch on the unit. As indicated in Figure A, it's off when "0" exists; It's at low power when "L"
exists; It's at medium power when "M" exists; It's at high power when "H" exists.
No.
Part Name
1
Control Box
2
Wall Bracket
3
Tapping Screw
4
Plastic Plug
5
Screw Knob M6*12

Patio Heater 10252 Instructions
v1.0: 10/11/15
Cleaning and maintenance:
Warning: before carrying out cleaning or maintenance, ensure the heater is switched off, disconnected from
the mains supply, and has been given adequate time to cool down.
If there is any heavy build-up of dirt, wipe thoroughly with a damp cloth. Take care that no moisture
enters the heating element.
Inspect the power cable for damage. Undue heat will cause the cable to stiffen and crack, this will
need to be replaced by a qualified service engineer.
Ensure the heating elements are kept free of dust or debris.
Refer to your local dealer if the heater mechanism needs replacing.
Troubleshooting:
Symptom
Problem
Solution
Heater does not operate,
although plugged in and switched
on.
Plug is loose/ bad connection.
Remove the plug & check the
connection of the plug and
socket.
Blown fuse.
Replace if necessary and
investigate the cause. If fuse
blows repeatedly consult your
local dealer.
No power at socket outlet.
Insert plug into a suitable socket.
Input voltage incorrect.
Ensure power supply matches the
rating on the label.
Technical Specification:
Dimensions (L x W x H)
480x215x265 (lamp unit) mm
Assembled height on stand
1575 (min) to 1900 (max) mm
Weight (including stand)
10.75 kg
Electrical supply
220-240V /50Hz, Class I
Power cable length
1.8m
Operating temperature
-20-25 degrees
Tilt range
Level to -25 degrees
Heat Output
1700-2000W
Plug wiring UK & Ireland
This appliance is fitted with a BS 1363 13-amp plug. If you have to replace the fuse, only those that
are ASTA or BSI approved to BS1362 and with a rated current of 13-amps should be used. If there is a
fuse cover fitted, this cover must be re-fitted after changing the fuse. If the fuse cover is lost or
damaged the plug must not be used. Spare fuse holders and fuses are available from electrical
outlets. If the socket outlets in your home or office are not suitable for the plug of this product, the
plug must be removed and disposed of safely as insertion of the plug into a socket is likely to cause
electric hazard. A replacement plug should be wired according to the following instructions:

Patio Heater 10252 Instructions
v1.0: 10/11/15
The cable
A mains electricity cable contains two or three inner wires. Each has a core of copper and an outer
layer of flexible plastic. This product is earthed or double insulated; the wires in the cord set are color
coded in the following way:
BLUE NEUTRAL
BROWN LIVE
GREEN & YELLOW EARTH
The diagram below shows the key features of a correctly wired three-pin mains plug.
We strongly recommend that this machine is connected to the mains supply via a Residual Current
Device (RCD). If in any double, consult a qualified electrician. Do not attempt to repair yourself.
Disposal
•Dispose of all paper, cartons and plastic in accordance with your local recycling regulations. At the
end of the product’s lifespan please dispose of it at an authorised household waste recycling centre.