Cornwell Tools CTB-MM700BR User manual

CTB-MM700BR / CTB-MM700BK / CTB-MM700BL
CTB-MM700NY / CTB-MM700RG / CTB-MM700RD 1 Rev. 07/24/07
ASSEMBLY INSTRUCTIONS
CTB-MM700BR, Bk, BL, NY, RG, RD
7 Drawer Pro Series Service Cart
37)6%,#!34%2WITH,/#+2)')$#!34%2
#
/
2
.
7
%
,
,
4
/
/
,
3
#
/
2
.
7
%
,
,
4
/
/
,
3
Mount push handle (Part #12) to the
same side of the cart as the locking
casters using the four stove bolts,
washers, and nuts provided.
Using 13mm socket completely tighten
all nuts.

CTB-MM700BR / CTB-MM700BK / CTB-MM700BL
CTB-MM700NY / CTB-MM700RG / CTB-MM700RD 2 Rev. 07/24/07
CTB-MM700BR, Bk, BL, NY, RG, RD
7 Drawer Pro Series Service Cart
Mounting Slots
HARDWARE SPECIFICATIONS
4 pcs.4 pcs. 4 pcs.
TROUBLESHOOTING
Troubleshooting Points for the CTBMM700 Series:
Problem: Drawers appear not to fit, do not slide in accurately
and bump the cart sides.
Solution: The roller bearing slides must be fully engaged into
the mounting slots on all drawers. They potentially could fall
out of position during shipment. Check the side of the cart to
determine which slide is out of position.
Remove the drawer that is out of position. The drawer is
removed by the two clips on the actual roller bearing slide.
Simply push the roller bearing slide back down into position.
Insert the drawer back onto the roller bearing slides.
SERVICE CART WEIGHT CAPACITY
Total Net Load. . . . . . . . . . . . . . . . . . . . . . . . 700 LBS
Top Compartment .....................150LBS
Top Six Drawers . . . . . . . . . . . . . . . . . . 70 LBS each
Bottom Drawer. . . . . . . . . . . . . . . . . . . . . . . 150 LBS
PLEASE NOTE: Loading cart beyond rated
capacity may cause structural damage to the cart
as well as personal and /or property damage.
Problem: Back Lock/Unlock Switch does not engage
the drawer.
Solution: The inside Lock/Unlock slide potentially could fall
out of its groove during shipment. Unscrew the four screws
that are holding the Lock/Unlock slide in place.
Once the screws are removed, simply place the latch back
onto the slide and tighten the four screws back down.

CTB-MM700BR / CTB-MM700BK / CTB-MM700BL
CTB-MM700NY / CTB-MM700RG / CTB-MM700RD 3 Rev. 07/24/07
TOOLS NEEDED FOR ASSEMBLY:
• 13mm Socket or wrench
PARTS LIST
CTB-MM700BR, Bk, BL, NY, RG, RD
7 Drawer Pro Series Service Cart
Also available:
RSSCPK Service Cart Polishing Kit.
RSDET8PK Ball Bearing Slide Detents
(Package of 8)
RSBKP Black Touch Up Paint (1oz.)
RSCTBBLU Blue Touch Up Paint (1oz.)
RSCTBBR Burgundy Touch Up Paint (1oz.)
RSYP Yellow Touch Up Paint (1oz.)
RSRDP Red Touch Up Paint (1oz.)
RSCORNORP Orange Touch Up Paint (1oz.)
RSMM7008LK Liner Kit
RSMM100CLP Logo Plate
1 RSLKN 1 Lock with Keys
2 RSMM700LGBK 4 Black Leg (each)
RSMM700LGBL Blue Leg
RSMM700LGBR Burgundy Leg
RSMM700LGNY Yellow Leg
RSMM700LGRD Red Leg
RSMM700LGRG Orange Leg
3 RSMM700BPLF 1 Left Front Bumper
RSMM700BPLR 1 Left Rear Bumper
RSMM700BPRF 1 Right Front Bumper
RSMM700BPRR 1 Right Rear Bumper
4 CTB700MMLD2BK 1 Drawer 2-1/2"
CTB700MMLD2BL
CTB700MMLD2BR
CTB700MMLD2NY
CTB700MMLD2RD
CTB700MMLD2RG
5 CTB100MMLD2BK 3 Drawer 3-1/4"
CTB100MMLD2BL
CTB100MMLD2BR
CTB100MMLD2NY
CTB100MMLD2RD
CTB100MMLD2RG
6 CTB700MMLD4BK 2 Drawer 3-3/4"
CTB700MMLD4BL
CTB700MMLD4BR
CTB700MMLD4NY
CTB700MMLD4RD
CTB700MMLD4RG
7 CTB700MMLD6BK 1 Drawer 6"
CTB700MMLD6BL
CTB700MMLD6BR
CTB700MMLD6NY
CTB700MMLD6RD
CTB700MMLD6RG
8 RSMM100DH 7 Drawer Handle (with end caps)
RSMM100DHP 14 Drawer Handle End Caps (each)
9 CTBMM100FC 1 set Fixed Caster (pair)
10 RSSWLCS 2 Swivel Caster w/lock (each)
11 RSGP 2 Gas Piston (each)
12 CTBMMHDK 1 Push Handle and Bracket Kit
13 CTBMM100RBS 6 Slides (pair)
14 CTBMM7HDS 1 HD Slides (pair)
15 RSLMC700BK 1 Black Locking Mechanism (Excluding Lock & Keys)
RSLMC700BL Blue Locking Mechanism (Excluding Lock & Keys)
RSLMC700BR Burgundy Locking Mechanism (Excluding Lock & Keys)
RSLMC700NY Yellow Locking Mechanism (Excluding Lock & Keys)
RSLMC700RD Red Locking Mechanism (Excluding Lock & Keys)
RSLMC700RG Orange Locking Mechanism (Excluding Lock & Keys)
RSMM700BK1 Bolt Kit for Legs and Bumpers ( 36 M8 x 17 bolts, nuts, and washers)
RSMM700BK2 Bolt Kit for Push Handle ( 4 M8 x 19 bolts, nuts, and washers)
RSMM700BK3 Bolt Kit for Casters ( 16 M8 x 16 bolts, nuts, and washers)
Item # Part # # Req'd Description
1
11
15
2
3(Left Front)
(Right Front)
(Right Rear)
4
5
6
7
8
3
3
9
10
8-End Cap
Detail
12
13
14