Cornwell Tools Pro Series User manual

CTBMM600PG 1 031914
ASSEMBLY INSTRUCTIONS
CTBMM600PG
6 Drawer Pro Series Service Cart
SWIVEL CASTER with LOCKRIGID CASTER
C
O
R
N
W
E
L
L
T
O
O
L
S
C
O
R
N
W
E
L
L
T
O
O
L
S
Mount push handle (Part #12) to the
same side of the cart as the locking
casters using the four stove bolts,
washers, and nuts provided.
Using 13mm socket completely tighten
all nuts.

CTBMM600PG 2 031914
CTBMM600PG
6 Drawer Pro Series Service Cart
Mounting Slots
HARDWARE SPECIFICATIONS
4 pcs.4 pcs. 4 pcs.
TROUBLESHOOTING
Troubleshooting Points for the CTBMM600 Series:
Problem: Drawers appear not to fit, do not slide in accurately
and bump the cart sides.
Solution: The roller bearing slides must be fully engaged into
the mounting slots on all drawers. They potentially could fall
out of position during shipment. Check the side of the cart to
determine which slide is out of position.
Remove the drawer that is out of position. The drawer is
removed by the two clips on the actual roller bearing slide.
Simply push the roller bearing slide back down into position.
Insert the drawer back onto the roller bearing slides.
Problem: Back Lock/Unlock Switch does not engage
the drawer.
Solution: The inside Lock/Unlock slide potentially could fall
out of its groove during shipment. Unscrew the four screws
that are holding the Lock/Unlock slide in place.
Once the screws are removed, simply place the latch back
onto the slide and tighten the four screws back down.
Cart Load Limit 700 LBS
Top 4 Drawer Load Limit 75 LBS
Bottom 2 Drawer Load Limit 150 LBS
•ReadandfollowallinstructionsinUser'sManual
•Donotloadcartsbeyondratedcapacity
•Locklidanddrawersbeforemoving
•Applybrakeonlockingcastersanytimecartisinplace
•Unitscantiporfallcausingdamageorpersonalinjury
•Donotopenmorethanoneloadeddraweratatime
•Donotstandonorstepindrawers
•Keepchildrenawayfromunit
•Weargloveswhenliftingedges
•Thisproductmaycontainoneormorechemicals
knowntotheStateofCaliforniatocausecancerand
birthdefectsorotherreproductiveharm.Wash hands
thoroughly after handling.
•Failuretoheedthesewarningsmayresultin
personalinjuryand/orpropertydamage
Patent#7,144,020B2;D529,254S
WARNING

CTBMM600PG 3 031914
TOOLS NEEDED FOR ASSEMBLY:
• 13mmSocketorwrench
PARTS LIST
CTBMM600PG
6 Drawer Pro Series Service Cart
Also available:
RSSCPK Service Cart Polishing Kit.
RSRBSDET8PK Ball Bearing Slide Detents
(Package of 8)
RSMM7008LK Liner Kit
RSCTBMM600PGLK Graphic Decals Kit for CTBMM600PG
1 RSLKN 1 Lock with Keys
3A RSMM700BPLF 1 Left Front Bumper
3B RSMM700BPLR 1 Left Rear Bumper
3C RSMM700BPRF 1 Front Right Bumper
3D RSMM700BPRR 1 Right Rear Bumper
4 CTB600MMLDPG2 1 Drawer 2"
5 CTB600MMLDPG3 3 Drawer 3"
6 CTB600MMLDPG6 1 Drawer 6"
7 CTB600MMLDPG9 1 Drawer 9"
8 RSMM100DHBK 6 Drawer Handle (with end caps)
8A RSMM100DHP 12 Drawer Handle End Cap (each)
9 CTBMM100FC 1 set Fixed Caster (pair)
10 RSSWLCS 2 Swivel Caster w/lock (each)
11 RSGP 2 Gas Piston (each)
12 CTBMMHDK 1 Push Handle and Bracket Kit
13 CTBMM100RBS 8 Slides (pair)
14 RSLMC600PG Locking Mechanism
(Excluding Lock & Keys)
RSMM700BK1 Bolt Kit for Legs and Bumpers
( 36 M8 x 17 bolts, nuts, and washers)
RSMM700BK2 Bolt Kit for Push Handle
( 4 M8 x 19 bolts, nuts, and washers)
RSMM700BK3 Bolt Kit for Casters
( 16 M8 x 16 bolts, nuts, and washers)
Item # Part # # Req'd Description
12
2
11
3A
10
3D
3B
3C
14
1
4
5
6
8
8A
7
9
13