Corsair Void Wireless SE Quick start guide

VOID Gaming Headsets
VOID Wireless Dolby 7.1 Gaming Headset
VOID USB Dolby 7.1 Gaming Headset
VOID USB Gaming Headset
Technical Guide
August 2015

Overview
The Corsair Gaming VOID gaming headsets, available in wireless, USB, and analog
stereo models, are designed for gamers with game-enhancing sound, a modern ultra-
comfortable design, and on-headset controls that provide instant one-hand adjustment
to key audio settings.
This guide focuses on the VOID Wireless and VOID USB models which include
advanced features including RGB lighting, an InfoMic status indicator, a CUE Control
dial, and CUE software support.
Before using, please ensure you download and install of CUE from our website:
http://www.corsair.com/downloads
The latest firmware for the headset will be updated through the software upon
start-up.

Specifications
Model
Void Wireless SE
Void Wireless
Void USB
Type
2.4 GHz Wireless
(USB 2.0 receiver)
2.4 GHz Wireless
(USB 2.0 receiver)
Wired USB 2.0
Available Colors
Yellow Jacket
Carbon
Carbon
Backlight
Ear cups (RGB)
Ear cups (RGB)
Ear cups (RGB)
Audio
Dolby 7.1
Dolby 7.1
Dolby 7.1
Driver
50mm Neodymium
50mm Neodymium
50mm Neodymium
Frequency
Response
20Hz –20kHz
20Hz –20kHz
20Hz –20kHz
Impedance
32 Ohms @ 1kHz
32 Ohms @ 1kHz
32 Ohms @ 1kHz
Mic Type
Unidirectional noise
cancelling
Unidirectional noise
cancelling
Unidirectional noise
cancelling
Mic Impedance
2.2k Ohms
2.2k Ohms
2.2k Ohms
Mic Frequency
Response
100Hz –10kHz
100Hz –10kHz
100Hz –10kHz
Mic Sensitivity
-37 dB (± 3 dB)
-37 dB (± 3 dB)
-37 dB (± 3 dB)
Dimensions
228mm(L) x 242mm(W)
x 108mm(H)
228mm(L) x 242mm(W)
x 108mm(H)
228mm(L) x 242mm(W)
x 108mm(H)
Product Weight
388g / 0.85lb
388g / 0.85lb
388g / 0.85lb
Warranty
2 years
2 years
2 years

Features
●Dolby 7.1 multi-channel surround delivers lethally accurate positional audio
●RGB lighting for individual customization or synchronization with other Corsair
RGB devices
●CUE Control dial enables rapid on-the-fly audio adjustments
●InfoMic LEDs relay instant visual status of audio and mic settings
●Efficient 50mm neodymium drivers deliver staggering bass and scintillating
highs
●Microfiber-wrapped memory foam ear pads for extended play
●Unidirectional noise-cancelling microphone makes gamers’ voices loud and
clear
●2.4 GHz wireless and battery provides cordless freedom up to 40 feet and 16
hours of uninterrupted gaming (VOID Wireless)
●USB extension dock for wireless receiver (VOID Wireless SE)

InfoMic & CUE Control –Upgrading to Unfair
InfoMic and CUE control are VOID’s solution to creating a way to control virtually every
aspect of the audio from the headset itself, while offering a visual feedback system.
There was a conscious effort to bring controls up to the left side of the headset,
enabling quick changes without having to find a cord-based volume/mute control or
button, so players could keep their finger on the trigger –or their mouse in most cases.
CUE Control functions
Adjust Volume - Turn dial upwards to increase volume. Turn dial downward to
decrease volume.
Change EQ Profile - A quick press will cycle through 5 EQ profiles. EQ profiles
can be changed in the CUE software.
Toggle Dolby 7.1 - Pressing and holding the dial will toggle Dolby on and off.
Mute Button
Mute toggle - a short key press toggles the mic on and off.
Sidetone - If the mute button is press and held, users can enable or disable
sidetone. When sidetone is on, sound from the mic is sent to the ear cups, so
users can hear themselves.
Volume up
Volume down
Short Key Press: Change EQ profiles
Long Key Press: Enable/Disable Dolby

Power Button
On/off –a short key press of the power button to turn the headset on and off. As
VOID Wireless is powering off, the ear cup will pulse either green, amber, or red
depending on the battery level.
Pairing –pressing and holding the power button for 10 seconds will put Void
Wireless into Pairing mode.
InfoMic
InfoMic is a new feature for our headsets, it provides a
visual indicator providing mic status, Dolby status,
battery levels, and connectivity status.
LED behavior:
LED 1 –Mic Status
LED off: Mic unmuted
Red: Mic muted
LED 2 - Battery Level
Amber pulse: >20% battery
Red pulse: >10% battery
Intervals between each pulse and brightness intensity level can be adjusted using CUE.
EQ profiles and Dolby Status
While CUE is running, quickly pressing the dial on CUE Control will change profiles,
InfoMic LED 2 will indicate which profile is active with a series of blinking lights and
beep. The number of blinks and beeps and will equal the profile number.
Profile 1: 1 blink + 1 beep
Profile 2: 2 blinks + 2 beeps
Etc
The color of the blinks on LED 2 during switching of profiles will indicated Dolby status.
Green –Dolby enabled
Red –Dolby disabled
Wireless pairing indicators
LED 2 Red rapid blinking –Wireless headset not synced with dongle
LED 1 and LED 2 blinking red and green –pairing mode. LED 2 will display long
green pulse when pairing is successful.

Corsair Utility Engine
Brief Overview
The VOID gaming headset can be programmed and controlled with CUE (Corsair Utility
Engine), the same software used for Corsair’s RGB keyboards and mice. CUE allows
users to configure the ear cup lighting, InfoMic LED notifications for mic status and
battery status, and create up to 5 different EQ profiles. Gamers can also use our newest
feature “CUE Link” which allows lighting effects to synchronize over all Corsair RGB
devices.
The software will also allow gamers to create multiple profiles of color and audio
settings for games and applications. These profiles can be automatically activated
when the game or loads. Users can export and import profiles/EQ settings/lighting to
share with one another on Corsair forums.
Configuring EQ Profiles
Void uses CUE or Corsair Utility Engine to adjust mic levels, Dolby on/off, sidetone
on/off, and EQ. CUE comes 5 EQ profiles (Pure Direct, Bass Boost, FPS Competition
Mode, Clear Chat, Movie Theater). Users can customize their own EQ profile and set up
to 5 on the fly profiles that can be controlled through CUE control.

To create and assign a new EQ profile:
1. Click the “Advanced Mode” button.
2. Click to the right and click on “new” to create a new profile
3. From here, users will be able to adjust the EQ to taste. Clicking on the slider
outside the circle will move that individual slider. Clicking on the circle inside the
slider will adjust that slider and adjacent sliders.
4. New EQ profile “custom”(can be renamed) will now be assigned to Profile #1
Users can move profiles by clicking on the vertical bar next to the profile name
dragging it to any of the 5 profiles or by using the drop down menu.
Users can also disable profiles by unselecting the profiles using the check box.

Configuring RGB Lighting
VOID and its RGB lighting is fully compatible with CUE and all other Corsair RGB
products. The headset, by default on startup, will use the “Rainbow” effect. We have
included other patterns selectable through the dropdown menu for users to select
immediately. Some patterns will have addition options to toggle the speed of the lights
and/or color of the pattern.

CUE LINK
CUE LINK is a feature available for those who have Corsair RGB keyboards and want
to synchronize RGB lighting across all Corsair RGB products.
How to set up CUE LINK:
1. Click the keyboard icon at the bottom
2. Select one of the 5 preset CUE LINK modes. Each mode can be customized by
clicking on the pencil icon.