Cortelco 2740 User manual

LIMITED WARRANTY
If you purchased this product new in the U.S. or Puerto Rico, CORTELCO warrants it
against defects in material and workmanship for a period of one (1) year from the date of
original purchase. his warranty is in lieu of all other express warranties. During the
warranty period, CORTELCO agrees to repair or, at its option, replace the defective
product, or any part of it without charge for parts or labor. his is your exclusive remedy.
his warranty does not cover damage resulting from accident, misuse, abuse, improper
installation or operation, lack of reasonable care, the affixing of any attachment not
provided by CORTELCO with the product and loss of parts. he warranty is voided in the
event any unauthorized person alters or repairs the unit. elephone companies use
different types of equipment and offer various types of services to customers.
CORTELCO does not warrant that this product is compatible with the type of
equipment of any particular phone company or the services provided by it.
CORTELCO DISCLAIMS ANY IMPLIED WARRAN Y, INCLUDING HE WARRAN Y
OF MERCHAN ABILI Y AND HE WARRAN Y OF FI NESS FOR A PAR ICULAR
PURPOSE, AS OF HE DA E ONE YEAR FROM HE ORIGINAL PURCHASE OF HE
PRODUC . CORTELCO ASSUMES NO RESPONSIBILI Y FOR ANY SPECIAL,
INCIDEN AL OR CONSEQUEN IAL DAMAGES.
HIS WARRAN Y GIVES YOU SPECIFIC LEGAL RIGH S, AND YOU MAY HAVE
O HER RIGH S WHICH VARY FROM S A E O S A E. SOME S A ES DO NO
ALLOW HE EXCLUSION OR LIMI A ION OF SPECIAL, INCIDEN AL OR
CONSEQUEN IAL DAMAGES OR LIMI A IONS ON
HOW LONG AN IMPLIED WARRAN Y LAS S, SO HE ABOVE EXCLUSION AND
LIMI A ION MAY NO APPLY O YOU.
If failure occurs and your telephone is in warranty, service shall be provided by returning
it to CORTELCO - Repair Center, 1 03 Sawyer Road, Corinth, Mississippi 38834,
shipping prepaid. he product will be repaired or replaced if examination by us
determines the product to be defective. elephones received damaged as a result of
shipping will require you to file a claim with the carrier.
FOR SUPPOR WI H HIS ELEPHONE, CALL 662-287-5281 AND REQUES
EX ENSION 127, OR E-MAIL [e-mail]
Quick Start Guide for 2740
4 Line Telephone System
All manuals and user guides at all-guides.com
all-guides.com

he 2740 is a 4 Line 16 Station KSU-LESS System. It supports additional station modules for
External Paging, Music On Hold, and Door Phone w/Door Striker Control.
he 2740 comes factory-set for “COMMON-LINE” installation which is also called “Square” in
telephone terminology. his means all lines are common on all instruments. he 2740 can also
support private lines.
[ FOR CORRECT FUNCTION, LINE 1 MUST BE LINE 1 ON ALL STATIONS AND IT MUST NOT
HAVE LINE FILTERS INSTALLED. THIS MEANS THAT LINE 1 CANNOT BE A DSL OR VOIP
LINE]. he 2740 telephone also supports ype II caller ID (Caller ID on Call Waiting).
First, unpack the telephones and check the content of the boxes. Each box should contain:
1 elephone Base
1 elephone Handset
1 elephone Desk Stand
1 Power Supply
1 Handset Cord (Coiled Cord)
2 Line Cords
1 7” Line Cord for wall mounting.
1. Connect handset cord to front left of telephone base and to handset.
2. Plug line cord(s) into line connectors on bottom of telephone. Observe the marking for Lines
1&2 and Lines 3&4.
3. Plug power transformer into a non-switched electric outlet, then plug the connector into the
base.
4. After connecting power to the telephone a station number must be assigned. he first station
number is 01. he last station number is 16.
o reset the telephone to default settings, press MENU, then press MU E twice, then press 2741.
his will cause all programming to be lost including any Caller ID information or Memory Speed
Dials. he line buttons will start to flash and the display will show all of the assigned stations along
the top of the display. he display will show “Station #??” with a soft key labeled “Change”. Press
the “Change” soft key and the first available station number will appear flashing. Press “Menu” key
to save station number or press “Change” to go to next available station number.
he following menu tree is for your assistance in programming the telephone system. o start the
programming, press the MENU button and use the Up and Down Arrows to move in the menu with
the Soft Key to make selections. Please see User Guide for detailed instructions. You may
download a copy of the User Guide at www.cortelco.com.
Menu Tree for Model 2 40
First level
Phone Setting
Memory Setting
ime/Date Set
Advanced Setting
PHONE SETTING
Station #__
01 - 16
Do Not Disturb:N
N (for NO) / Y (for YES)
Ringer Settings
L1, L2, L3, L4 Ringer:
ON/DELAY/OFF
Off Hook Ring:Y
Y (for YES) / N (for NO)
Intercom Prefs
Intcm:
RING/VOICE/
HANDSFREE
Pages:
ALLOWED/BLOCKED
Line ype
L2, L3, L4: ____
COMMON/ PRIVA E /
UNCONNEC ED
Auto Seize:___
L1/L2/L3/L4/IN CM
Distinctive Ring
RING SOUND#
L1, L2, L3, L4:____
<1,2,3,4,5,6,7,8>
Area Codes
Home Code:XXX
Local Code1 – 6:xxx
1Plus7 Code1 – 6:xxx
elco VMWI
VMWI: Line___
<L1, L2, L3, L4, OFF>
VMWI:___ (type)
<FSK/S U ER>
Caller ID Store
L1 – L4 CID Store
<ON/OFF>
oll Restriction
Enter Code:1234
Set Restricted #
1 – 5:__
Set Allowed #
1 – 5:__
Line Restriction
L1 – L4:___
NORMAL/RES RIC ED
Station Naming
For 16 stations
(set at station #01)
Hold Remind
<OFF/30s/1 min/2min>
Centrex Prefix
Prefix:XXXXXXX
Prefix:_____
Message Lamp
RESE
CIDCW:___
<HIGH SENS/OFF/LOW SENS>
End of List
MEMORY SETTING
Select Location
Empty Location or the number previously stored
is shown
After M1, M2, M3, M4 or M5 is pressed
Directory
After # is pressed
TIME/DATE SETTING
IME:___
(13:44)/(HH:MM)
AM/PM:___
AM/PM
DA E:___
(01/01/00)/(MM/DD/YY)
ADVANCED MEMORY SETTING
Erase Memory
Memory Dials
Erase Settings
Erase oll Restr
Enter Code:
Headset ype
Hst:___
2.5mm/HANDSE
Flash ime:___
600ms/1s/100ms/300ms
Hold Drop:___
30MIN / 99MIN / 5MIN / 15MIN
Hold Release:___
ON/OFF
Station #:__
NORMAL/LOCKED
Loop Detect:___
48V/24V/12V/OFF
one/Pulse: ONE
ONE/PULSE
System Privacy:Y
Y (for YES) / N (for NO)
his option only appears for station #01
All manuals and user guides at all-guides.com