Costway OP3672 User manual

OP3672
BBQ Grill Gazebo
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
USA office: Fontana GBR office: Ipswich AUS office: Truganina
If you're having difficulty, our friendly
customer team is always here to help.
USA:[email protected]
AUS:[e-mail]
GBR:[e-mail]

BBQ Grill Gazebo
Before You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from
babies and children as they potentially pose a serious choking hazard.
02 03

27
14
8
PARTS LIST
04 05

M
M
Insert Top Tubes (F/F1) into the Connector Hub (G). Repeat this
step 4 times as shown in Figure 3.
Attach the Large Canopy Fabric (K) to the Top Frame assembled in Step 3.
Figure 3
F
F
F
F
G
Figure 4
F
K
F1
F1
F1
ASSEMBLY INSTRUCTIONS
1
2
3
4
06 07

N
N
7
8
5
6
08 09

Fixed the bottom hole of each of four Pillars (A/B/B1) to a solid surface, ground, patio,
deck etc. by using the Ground Stake (R). Repeat this step to attach the shelves at
each of the four corners as shown in Figure 9.
NOTE: The side tables are adjustable to two heights, 24 in. and 30 in. There is a cap
pre-inserted in the lowest hole on each Pillar. Please remove the cap for the hole first
if you want to adjust the table height to 24 in. for the first time. And then use included
bolt & cap in unused hole in pillar once attached.
Now please enjoy your new grill gazebo.
Figure 9
R
A/B/B1
H
HY
B1
B1
M
U
UM
Bottle opener
In case a return is required, the item must be returned in original
box. Without this your return will not be accepted.
DO NOT discard the box / original packaging.
Take a photo of the box markings.
Take a photo of the damaged part (if applicable).
Send us an email with the images requested.
A photo of the markings (text) on the side of the box is required in
case a part is needed for replacement. This helps our staff identify
your product number to ensure you receive the correct parts.
A photo of the damage is always required to file a claim and get
your replacement or refund processed quickly. Please make sure
you have the box even if it is damaged.
Email us directly from marketplace where your item was purchased
with the attached images and a description of your claim.
Return / Damage Claim Instructions
9
10 11