Costway TM10001 User manual

EN DE FR ES IT PL
Train Track Table Toy Set
TM10001

Please read all instructions carefully and keep it for future reference.
WARNING
Attention: The Product is not suitable for the children under 3 years
Danger: Keep all small parts and packaging materials for this product away from babies and
children, otherwise they may pose a choking hazard.
General Warnings:
The product must be installed and used under the supervision of an adult.
Read through each step carefully and follow the proper order.
Remove all packaging, separate and count all parts and hardware.
Please ensure that all parts are correctly installed, incorrect installation can lead to a danger.
We recommend that, where possible, all items are assembled near to the area in which they will
be placed in use, to avoid moving the product unnecessarily once assembled.
Ensure a secure surface during construction, and place the product always on a flat, steady
and stable surface.
WARNING:
CHOKING HAZARD-Small parts.
Not for children under 3 years.
02

40005M
Please keep this packaging for reference since it contains important information.
Adult assembly required. Please read enclosed instructions before use. Young children in play are
unaware of potential dangers and hazards, therefore responsible adult supervision is essential.
• Toy to be assembled by a responsible adult.
• Remove all packaging before giving to your child.
• Young children in play are unaware of potential hazards and dangers,
therefore responsible adult supervision is essential.
• Warning ! Not suitable for children under 36 months
due to small parts - choking hazard.
• Caution ! Product should be used only for the purpose for which it
was designed. Children should not stand or climb on the product.
Train Track Table Toy Set
03

x12
C
x2
D1
x16
A
x16
B
x2
D2
Table Parts
Table Drawer
1x2
2x2
7x2
6x2
5
3
8
4
04

Table_Step 1
Step 2
x8
B
x4
A
2
2
1
2
2
05
1. Put the round screw with the tooth side
up, and put it into the reserved hole of the
No. 2 board in parallel.
2. Put the No. 2 board into the No. 1 board
vertically and fix it with long screws.

Step 3
Step 5
x4
A
Step 4
2
2
1
1
1
2 2
3
06
3. Place the No. 3 board between
the two No. 2 boards.
4. Put the other end of the No. 2
boards into the No. 1 board
vertically, and fix it with long screws.
5. Put the No. 4 and No. 5 desktop
panels in order from left to right.
5
4

Drawer_Step 1
Step 2
Step 4
Step 3
x8
B
7
7
6
8
x4
A
x12
C
6
6
x2
D1
D1
D1
x2
D2
D2
D2
7
7
6
D1
D2
07
1. Put the round screw with the tooth
side up, and put it into the reserved
hole of the No. 7 board in parallel.
2. Fix the wheels on the inner
side of the No. 6 board.
3.Put the No. 7 board into the No. 6
board vertically and fix it with long
screws.
4. Insert the No. 8 desktop panel.
7
7
7

Step 5
x4
A
6
Accessories
x4
x10
x4
08
5. The No. 6 board at the other end
is fixed with long screws.

C
C
J
E
C
C
Tracks
A
I
B G
H K
DE
J
FC
X3 X5 X11 X1X2 X1X1
108 mm
54 mm
X20 X1 X1 X1
Tracks Parts
H
C
C
C
C
C
C
C
B
B
B
B
A A
A
D
G
E
I
F
K
B B
09