COUGAR DUST 2 User manual

Assembly Drawing
DUST 2
COUGAR Dust 2 features military style.
It is an Mini-ITX case with optimal compatibility, which is born for
travelling gamers and LAN Party dominance. Just grab your rig and go!
ENGLISH
● Sturdy and solid aluminum panels
● Ergonomic carry handles make carriage a breeze
● Excellent cooling solution: support for a 280mm water cooling radiator
● Top-notch performance: support for full-sized vertical GPU (up to 330mm) and PSU (160mm PS2 ATX)
● Easy access to USB3.1 Gen-2 Type-C connector
● 坚固耐用的铝合金面板设计
● 一体成型便携把手设计，玩到哪带到哪
● 优化的散热表现，支持 280mm 水冷排
● 强大的硬件兼容性，可支持长度达330mm的高端显卡与 160mm 长的PS2 ATX电源
● 支持最新 USB3.1 Gen-2 Type-C 接口
中 文
год и месяц изготовления продукции указаны в серийном номере продукта.
(существует 2 способа определения даты изготовления, оба способа описаны ниже)
После S/N: первые две цифры означают год, вторые две – месяц изготовления.
Например, S/N: H1702000001 означает, что товар был произведен в феврале 2017 года.
После S/N: если указаны буквы, то две буквы представляют цифры из таблицы ниже,
и означают год, последующие две цифры – месяц изготовления.
Например, S/N: DAG02REVI000001 означает, что товар был произведен в феврале 2017 года.
● Например,
AG = 17 = 2017 год
ДАТА ИЗГОТОВЛЕНИЯ ПРОДУКЦИИ
A B C D E F G H I J
1234567890
A
B
ACCESSORY KIT
GLOBAL WARRANTY POLICY
WARRANTY PERIODS OF COUGAR GAMING DEVICES
Product : COUGAR DUST 2
Warranty : 1 Year
● This warranty gives you specific legal rights. You may also have other rights granted under local law.
These rights may vary.
● Only for electrical components.
X 8
X 20
X 7
X 4
Fan screws
X 43.5" HDD rubber mounts
Motherboard screws & 2.5" SSD screws
Power supply screws
3.5" HDD screws
Cable ties
Cable ties
X 4
X 3
Power button / Reset button
A
Type C 3.1 / USB 3.0 / 4 pole headset audio jack
B
CLeft panel
DRight panel
E2.5" HDD/SSD trays
GAir filter for top panel
HTop panel
IPCIe 16x Gen3 High-Speed Riser Card
( pre-installed )
JPower extension cord ( pre-installed )
KAir filter for bottom panel
LBottom panel
FPower supply bracket
Installing the Front I/O Connectors
AUDIO
AUDIO
POWER SW
POWER SW
RESET SW
POWER LED
POWER LED + POWER LED
-
TYPE-C 3.1
USB3.0
USB 3.0 RESET SW
DUST 2
Small Form Factor
175 (W) x 299 (H) x 403 (D) mm
6.9 (W) x 11.8 (H) x 15.9 (D) in
175 (W) x 335 (H) x 403 (D) mm
6.9 (W) x 13.2 (H) x 15.9 (D) in
Mini ITX
*1
2 Max.
Top : *280mm / *240mm / *140mm / 120mm
(Max. water block height is under 55mm)
160 (mm) / 6.3 in
2 (2 SSD trays included)
2 (A PCIe 16x Gen3 high-speed riser card included)
Top : 120mm x 2 / 140mm x 2
Type C 3.1 x1, USB3.0 x1, 4 Pole Headset Audio Jack x1, Reset Button
Model Name
Case Form Factor
Motherboard Type
Dimensions (WxHxD)
I/O Panel
3.5" Drive Bay
2.5" Drive Bay
Expansion Slots
Cooling Fan Support
Water Cooling Support
Maximum Number of Fans
Max. Graphics Card Length
Max. CPU Cooler Height
Max. PSU Length
330 (mm) / 13 in (Max. graphic card height is under 60mm)
70 (mm) / 2.8 in
Specifications might vary depending on the country or region of sale.
*Please choose either of a 280mm/240mm/140mm radiator or a 3.5" HDD to install on the top panel.
Exclude Handles
Include Handles
A
B
I
C
D
G
K
J
H
EE
F
L

Open the box buckles of side panels.
* The maximum PSU length is 160mm.
* The maximum PSU length is 160mm.
* Please install the vertical graphic card with the
included PCIe 16x Gen3 High-Speed Riser Card.
* Max. graphic card height is under 60mm.
After removing side panels, the top panel can
be removed.
Please push out the dowel pins from the holes on the top
of side panels and tilt the side panels 45° outward.
Remove the base from the slots at bottom.
*Please insert the 3.5” HDD rubber mounts
in the 3.5” HDD’s hole locations, and then
install 3.5” HDD with the screws.
Removing top and side panels
Installing 2.5" SSDs /HDDs Installing the power supply Installing the vertical graphic card Installing the Mini ITX motherboard
120
140
*240
*280
120
140
Installing water cooling radiators & cooling fans Installing the 3.5" HDD
*Please choose either of a 280mm/240mm radiator
or a 3.5" HDD to install on the top panel.
*Max. water block height is under 55mm.
1
Please remove the screws of PSU bracket.
1
Please push out the PSU bracket
from the notch.
2
Mount the screws of the PSU bracket.
3
Plug the power cord first,
and then turn on the switch.
4
2
2
3
Connector
Install with trays (There are two SSD trays in this case. )
* Please install the 2.5" SSD first,
and then the power supply.
RIGHT
RIGHT
VERTICAL GPU
UP TO 330mm
MINI
ITX
MB
Compucase Enterprise Co.,Ltd.
No. 225, Lane 54, An Ho Road Sec. 2 Tainan, Taiwan, R.O.C
Tel:[phone]
Service E-Mail:[email protected]
COUGAR USA Technical Service
Tel: [phone]
Mail: [email protected]
https://cougargaming.com/support/contact/upload/
For more information, please visit
Compucase Enterprise Co.,Ltd.
All rights reserved.
www.cougargaming.com
Made in China
LEFT
"Power ON"
RIGHT LEFT
TOP
3.5" HDD
1
BACK
2
FRONT
2-1
2-2