Courtyard Creations RVS941G User manual

RVS941G
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
AUGUSTA ALL-WEATHER
WICKER CUSHION SWIVEL GLIDERS - 2PK
PAGE 1 OF 3
E-3
Use the correct bolts as indicated. Do not tighten any of the bolts until the swivel rocker chair is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO
TEL: [phone]
FAX: [phone]
PARTS LIST
COURTYARD CREATIONS INC.
"
"
"
"
"
HEX.KEY WRENCH 6MM
NUT WRENCH 10&13MM
JAM NUT M8*1.25
WASHER d6.5*D30*2.0
WASHER d8.5*D12*2.1
BOLT M8*30
BACK ASSEMBLY
SEAT ASSEMBLY
LEFT ARM
RIGHT ARM
BASE ASSEMBLY
1
2
3
4
5
6
7
8
11
12
14
15
16
17
18
19
21
22
23
24
20
1
1
1
1
1
1
1
4
12
1
4
4
4
1
1
1
1
RVS941G-CS02-1
RVS941G-CS03-1
RVS941G-CS01-2
RVS941G-CS01-3
RVS941G-CS14-1
18000744004
RFS8821-CS04
RVS941G-CS12-1
17C01A0810001YX
17FC08030801-YX
17FD08300501-YX
17FA05040301-YX
17D03A040401-YX
17FA05100701-YX
17KAA0101----Y4
17KAA0201----Y4
PART
NO. MATERIAL CODE PART Q’TY PART NO. MATERIAL CODE PART Q’TY
WASHER d8.5*D17*1.6
17FA08060601-YX
17KAB1101----Y4
HEX.KEY WRENCH 4MM
9
10
DECORATIVE
PLASTIC COVER
SUPPORT FRAME
SEAT POST
WASHER d8.5*D12.5*1.5
13 2
WASHER d6.5*D13*1.0
LY
9
17C40A0712001YX
BOLT M6*35
2
17C40A0719001YX
BOLT M6*55
4
BOLT M8*40
17C03A0814041YX
1
1
61R941GX00001BA
BACK CUSHION
SEAT CUSHION
61R941GY00001BA
2
18000C23001
PLASTIC NUT M6*P1.0

2
3
4
9
9
30
#11 BOLT M8*30
3
4
5
PAGE 2 OF 3
FIGURE 1 FIGURE 2
FIGURE 3 FIGURE 4
FIGURE 5 FIGURE 6
E-3
9
1
3
4
9
10
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
L
R
35
#9 BOLT M6*35
Step 1:
Place the back assembly (#1) onto a non-abrasive
surface, such as a carpet. Fasten the arms (#3 and #4)
to the back assembly (#1) by using bolts (#9).
Keep the bolts loose. See Figure 1.
Note:
The labels marked “L” and “R” on the arms (#3 and #4)
should coincide with Figure 1 to ensure proper assembly.
55
#10 BOLT M6*55
Step 2:
Fasten the seat assembly (#2) to the back assembly (#1)
by using bolts (#10), washers (#13) and plastic nuts (#19).
Keep the bolts loose. See Figure 2.
2
1
13
19
35
#9 BOLT M6*35
Step 3:
Fasten the seat assembly (#2) to the arms (#3 and #4)
by using bolts (#9). Keep the bolts loose.
See Figure 3.
11
14
14
14
Step 4:
Turn the swivel rocker chair upside down, fasten the
support frame (#5) to the left arm (#3) and the right
arm (#4) by using bolts (#11) and washers (#14).
See Figure 4.
6
5
12
16
15
17
12
16
15
17
#12 BOLT M8*40
40
6
5
Step 5:
Place the seat post (#6) onto the brace of the support
frame (#5). Fasten them together by using bolts (#12),
washers (#15 and #16) and jam nuts (#17).
See Figure 5.
A
7
88
7
Step 6:
Place the decorative plastic cover (#7) onto the chair's
base assembly (#8) as above picture shows.
See Figure 6.
A
7

PAGE 3 OF 3
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
please visit us at
[email protected]
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL OF THE PARTS, MAKING SURE THAT
YOU HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
E-3
Warranty
This product is covered by Courtyard Creations Inc.'s one±year limited warranty.
Proof of purchase (dated register receipt) is required for warranty claims.
It remains the customer’s responsibility for freight and packing charges to and from the service center.
FIGURE 7 FIGURE 8
35
#9 BOLT M6*35
9
8
23
24
6
18
Step 7:
Insert the seat post (#6) into the hole located in the
center of the base assembly (#8). Fasten them together
by using bolt (#9) and washer (#18). Make sure that all
of the bolts have been tightened completely.
See Figure 7.
Note:
For ease with installation, we recommend that the seat
post (#6) beslightly oiled or waxed before fastening to
the base assembly (#8).
Step 8:
Turn the swivel rocker chair to its upright position. Place
the cushions (#23 and #24) onto the swivel rocker chair.
See Figure 8
Caution:
To ensure one’s safety during use of this swivel rocker
chair, examine all of the bolts to make sure that they
are securely fastened. This is a chair with swivel rocker
ability; therefore, use by young children should be adult
supervised.
Cleaning and Maintenance
Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame or fabric parts.
The cushions may be washed on the surface only by using mild soap and water or commercial foaming upholstery
cleaner if necessary. If washed, rinse well and hang to dry. Do not machine wash or dry.
We recommend the use of furniture covers when not in use.
Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of
your swivel rocker chair.
In order to prolong the life and beauty of your swivel rocker chair, we recommend that it be stored in a dry and
protected area during off season periods.
Swivel glider is for sitting purposes only. Standing on or misuse of swivel glider may result in damage or injury.
Weight limit 250 lbs (113.5kg). Not intended for commercial use.