Courtyard Creations XUS015L-WM User manual

#3 BOLT M6*16
XUS015L-WM
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PARTS LIST
PART
NO. PART
NO.
MATERIAL CODE MATERIAL CODE
PART PART Q’TY Q’TY
1
2
3
1
2
4
5
6
7
8
9
41
1
LEG
SEAT ASSEMBLY
17C33A0706001Y4
BOLT M6*16
BOLT M6*14
17FA05040301-Y4
18000337004
17KAA0101----Y4
WASHER d6.5*D13*1.0
BOLT CAP M6
BOLT CAP
HEX.KEY WRENCH 4MM
XUS015L-CS02-1
XUS015L-CS04-1
FIGURE 1
Step 1:
Place one of leg (#2) onto a non-abrasive surface, such
as a carpet, with its holes facing upwards. Fasten the
seat assembly (#1) to the leg (#2) by using bolts (#3
and #4) and washers (#5). Keep the bolts loose.
See Figure 1.
COURTYARD CREATIONS INC.
PAGE 1 OF 2
STOP DON’T RETURN TO STORE!
1
2
CUSHION
7
3
4
5
6
17C02A0755131Y4
18000337006
HEX.KEY WRENCH 6MM
17KAA0201----Y4
10 61X015LC00001BA
4
4
4
4
1
Attention:
Make sure that each bolt needed for all steps match the
corresponding figure to ensure proper assembly.
14
#4 BOLT M6*14
16
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings
required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
!
!
!
!
!

FIGURE 2 FIGURE 3
Step 2:
Fasten the other leg (#2) to the seat assembly (#1)
by using bolts (#3 and #4) and washers (#5).
Step 3:
Turn the ottoman to its upright position and place the
cushion (#10) onto the ottoman. Secure the cushion to
the ottoman by using plastic clamps. See Figure 3.
Cleaning and Maintenance
•Wash frame parts with mild soap and water, rinse thoroughly, and dry frame completely. Do not use bleach, acid,
or other solvents on the fabric or frame parts.
• Cushions may be surface washed with mild soap and water if necessary. Commercial foaming upholstery
cleaner may also be used. Rinse well and hang to dry. Do not machine wash or dry.
• We recommend the use of furniture covers to protect your ottoman when not in use.
•Inspect and tighten all bolts or fasteners on a regular basis to ensure the proper performance and safety
of your ottoman.
•In order to prolong the life and beauty of your ottoman, we recommend that the automan be stored in a dry
and protected area during off season periods.
PAGE 2 OF 2
STOP DON’T RETURN TO STORE!
Make sure that all of the bolts have been tightened
completely and then cover them with bolt caps
(#6 and #7). See Figure 2.
2
2
10
1
6
3
547
#3 BOLT M6*16
14
#4 BOLT M6*14
16
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
MissingAPart?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
IF YOU DO NOTLOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCEANYDIFFICULTYDURING ASSEMBLYOR IF ANY
PARTS ARE MISSING OR DAMAGED,CALL THE HELP LINE AT
1-877-539-7436 BEFORERETURNING THIS ITEM TO THE STORE.
PROVIDE THEFOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS
LIST.
MOST PROBLEMSCAN BERESOLVED WITHOUT RETURNING THIS
PRODUCT TO THERETAILER.