Courtyard Creations KSS620M-WM User manual

ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PAGE 1 OF 2 COURTYARD CREATIONS INC.
Do not discard any of the packaging until you have checked that you have all the parts
and pack of fittings.
Keep children away during assembly. This item contains small parts which can be
swallowed by children. Children should always be under direct adult supervision while
using the product.
Retain the assembly instructions for future reference.
Please quote following FQC NO. when contacting service center.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
STOP DON’T RETURN TO STORE!
!
!
!
!
Step 1:
Place the right arm (#4) onto a non-abrasive
surface, such as a carpet. At the front of the bench,
fasten both the left arm (#3) and the right arm (#4)
to the seat assembly (#2) by using bolts (#5 and
#6) and washers (#8). Keep the bolts loose.
See Figure 1.
Note:
The labels marked “L” and “R” on the arms (#3 and
#4) should coincide with Figure 1 to ensure proper
assembly.
KSS620M-WM
FIGURE 1
RIGHT ARM
BOLT M6*16
BOLT M6*14
SEAT ASSEMBLY
BOLT M6*35
WASHER d6.5*D13*1.0
BOLT CAP
HEX.KEY WRENCH 4MM
HEX.KEY WRENCH 6MM
BOLT CAP M6
LEFT ARM
PARTS LIST
PART
NO. PART NO.
1 1 7
2
4
2
8
1
1
8
9
10
11
12
1
1
1
2
4
2
3
4
5
6
17C02A0712003Y4
17FA05040301-Y4
1800337004
1800337006
17KAA0101----Y4
17KAA0201----Y4
62KSS620MB101
KSS620M-CS02
KSS620M-CS01
KSS620M-CS03
17C33A0706001Y4
17C02A0755131Y4
BACK ASSEMBLY
MATERIAL
CODE MATERIAL CODE
PART PARTQ’TY Q’TY
Attention:
Make sure that each bolt needed for all steps
match the corresponding figure to ensure proper
assembly.
16
5
610 2
4
3
9
8
14
#5 BOLT M6*16
#6 BOLT M6*14
L
R

Cleaning and Maintenance
• Wash frame parts with mild soap and water,
rinse thoroughly, and dry frame completely. Do
not use bleach, acid, or other solvents on the
frame parts.
•
We recommend the use of furniture covers when
not in use.
• Please inspect and tighten all bolts or fasteners
on a regular basis to ensure proper performance
and safety of your chair.
• In order to prolong the life and beauty of your
chair, we recommend that it be stored in a dry
and protected area during off season periods.
STOP DON’T RETURN TO STORE!
PAGE 2 OF 2
Missing A Part?
No Need To Go Back To
TheStore!
The store where you made your purchase
does not stock parts for this item
if you need parts,
whether they are missing or damaged.
Call Toll Free
TEL: [phone]
FAX: [phone]
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
PLEASE SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
SHOULD YOU NOTLOCATE ALL OF THE ABOVE PARTS, PLEASE INSPECTALL
PACKING MATERIAL FOR ANYSMALL PARTSTHAT MAYHAVEBECOME
SEPARATED IN SHIPMENT.
SHOULDYOU EXPERIENCEANY DIFFICULTYDURING ASSEMBLYOR IF ANY
PARTIS MISSING OR DAMAGED,PLEASE CALL THE HELP LINE 1-877-539-7436
BEFORERETURNING THE ITEM TO THESTORE.
PLEASE PROVIDE THEFOLLOWING INFORMATION:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS LIST
SHOWN ON ASSEMBLY INSTRUCTIONS.
MOST PROBLEMSCAN BERESOLVED WITHOUT RETURNING THIS PRODUCT
TO THERETAILER.
The store where you made your purchase
does not stock parts for this item
if you need parts,
whether they are missing or damaged.
STOP!
MissingAPart?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free
TEL: [phone]
FAX: [phone]
FIGURE 2 FIGURE 3
FULL ASSEMBLY
Step 3:
Fasten the back assembly (#1) to the left and
right arms (#3 and #4) by using bolts (#7).
See Figure 3.
Step 4:
See Full Assembly.
Make sure that all of the bolts have been
tightened completely and then cover them with
bolt caps (#9 and #10).
35
6
7 10
710
10
1
#7 BOLT M6*35
14
#6 BOLT M6*14
2
3
43
4
Step 2:
At the rear of the bench, fasten both the left arm
(#3) and the right arm (#4) to the seat assembly
(#2) by using bolts (#6). Keep the bolts loose.
See Figure 2.