Courtyard Creations KLS777X-WM User manual

#6 BOLT M6*14
14
14
14
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
Attention:
Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
Step 1:
Place the back assembly (#1) onto a non-abrasive
surface, such as a carpet. Place the seat assembly
(#2)
to the back assembly (#1) by using bolts (#6)
. Keep the
bolts loose. See Figure 1.
FIGURE 1
KLS777X-WM
KLS777X-CS03-1
62KLS777XB101
KLS777X-CS01-2
KLS777X-CS01-3
17C33A0706001Y4
17C02A0755131Y4
17FA05040301-Y4
18000337004
18000337006
17KAA0101----Y4
17KAA0201----Y4
PARTS LIST
PART
NO. MATERIAL CODE PART Q’TY PART NO. MATERIAL CODE PART Q’TY
1
2
3
4
5
6
7
BACK ASSEMBLY
LEFT ARM
RIGHT ARM
BOLT M6*16
BOLT M6*14
SEAT ASSEMBLY
WASHER d6.5*D13*1.0
BOLT CAP
BOLT CAP M6
HEX.KEY WRENCH 4MM
HEX.KEY WRENCH 6MM
8
9
10
11
12
1
1
1
1
4
4
4
4
4
1
1
1
1
9
6
2
PAGE 1 OF 2
SEAT CUSHION
61K77XC00001BA
COURTYARD CREATIONS INC.
Use the correct bolts as indicated. Do not tighten any of the bolts until the bench is completely
assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
"
"
"
"
"
STOP DON’T RETURN TO STORE!

Step 4:
Place the cushions (#12) onto the bench. Secure the
cushion to the bench by using the ties. See Figure 4.
PAGE 2 OF 2
Cleaning and Maintenance
ǸWash frame parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or other
solvents on the frame parts.
ǸCushions may be washed on the surface only by using mild soap and water or commercial foaming upholstery
cleaner if necessary. If washed, rinse well and hang to dry. Do not machine wash or dry.
ǸWe recommend the use of furniture covers when not in use.
ǸInspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of
your bench.
ǸIn order to prolong the life and beauty of your bench, we recommend that it be stored in a dry and protected
area during off season periods.
Step 2:
Fasten the arms
(#3 and #4) to the seat assembly (#2)
by using bolts (#5)
and washers (#7). Keep the bolts
loose. See Figure 2.
Note:
The labels marked “L” and “R” on the legs (#3 and #4)
should coincide with Figure 2 to ensure proper assembly.
Step 3:
Fasten both the left arm (#3) and the right arm (#4) to
the back
assembly (#1) by using bolts (#6). Make sure
that all of the bolts have been tightened completely
and
cover them with bolt caps (#8 and #9). See Figure 3.
FIGURE 2 FIGURE 3
FIGURE 4
4
7
5
8
7
5
8
3
R
L
#5 BOLT M6*16
16
6
9
3
4
1
2
2
#6 BOLT M6*14
14
4
3
R
R
L
M6
*1
6
OL
TM
2
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
MissingAPart?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
12
STOP DON’T RETURN TO STORE!