Courtyard Creations TRS19SA User manual

FIGURE 1
Step 1:
Place the table top (#1) onto a non-abrasive surface,
such as a carpet, with its underside facing upwards.
Fasten the legs (#2) to the underside of the table top
(#1) rim by using bolts (#4). Keep the bolts loose.
See Figure 1.
HEX. KEY WRENCH 10MM
BOLT M6*20
BOLT M6*15
LEG
CENTER CONNECTOR
TABLE TOP
17KAC3101----Y3
17C40A0708001YX
17C40A0705001YX
62TMS20SKY101
TRS19SA-CS04-1
4
4
1
TRS19SA-CS05-1
4 8
7
5
HEX. KEY WRENCH 4MM
17KAA0101----Y4 16
1
4
1
3
2
1
Q’TYPARTMATERIAL CODE
PARTS LIST
PART
NO. Q’TYPARTMATERIAL CODE
PART
NO.
TRS19SA
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PAGE 1 OF 2 COURTYARD CREATIONS INC.
#4 BOLT M6*15
Attention:
Make sure that each bolt needed for all steps
matches the corresponding figure to ensure proper
assembly. 22
2
2
4
1
15
!
!
!
!
!
!
Use the correct bolts as indicated. Do not tighten any of the bolts until the table is completely assembled.
Do not sit or stand on this table.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
TOUCH-UP
PAINT FOR TABLE TOP 1
1404046
E-2

FIGURE 3FIGURE 2
PAGE 2 OF 2
E-2
Step 2:
Fasten the center connector (#3) to the middle of
the legs (#2) by using bolts (#5). Make sure that
all of the bolts have been tightened completely.
See Figure 2.
Cleaning and Maintenance
• Wash frame parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame parts.
• Inspect and tighten all bolts and fasteners on a regular basis to ensure proper performance and
safety of your table.
• When moving the table, lift. Do not drag this table.
• We recommend the use of furniture covers when not in use.
• In order to prolong the life and beauty of your table, we recommend that it be stored in a dry and
protected area during off season periods.
Step 3:
Turn the table to its upright position.
See Figure 3.
Note:
To repair any scratches on the table top, use the
touch-up paint for table top (#8) provided.
#5 BOLT M6*20
20
2
2
3
2
2
5
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
MissingAPart?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
please visit us at
[email protected]
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL OF THE PARTS,MAKING SURE THAT
YOUHAVE ALL OF THEPARTSLISTED.
IF YOU DO NOTLOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCEANY DIFFICULTYDURING ASSEMBLYOR IF ANY
PARTS ARE MISSING OR DAMAGED,CALL THE HELP LINE AT
1-877-539-7436 BEFORERETURNING THIS ITEM TO THESTORE.
PROVIDE THEFOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS
LIST.
MOST PROBLEMSCAN BERESOLVED WITHOUT RETURNING THIS
PRODUCT TO THERETAILER.
Warranty
•This product is covered by Courtyard Creations Inc.'s one–year limited warranty.
•Proof of purchase (dated register receipt) is required for warranty claims.
•It remains the customer’s responsibility for freight and packing charges to and from the service center.