Courtyard Creations KFS561F-WM User manual

KFS561F-WM
#6 BOLT M6*20
SEAT CUSHION
LEG A
LEG B
BACK CUSHION
BOLT M6*20
BOLT M6*12
WASHER d6.5*D13*1.0
BOLT CAP
HEX.KEY WRENCH 4MM
PARTS LIST
PART
NO.
PART
NO.
Attention:
Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
Step 1:
Insert the seat assembly (#1) into the leg A (#2) and
the leg B (#3). Fasten them together by using bolts (#6)
and washers (#8). Keep the bolts loose. See Figure 1.
Note:
The number labels “2, 3” attached on the legs should
coincide with Figure 1, 2 & 4 to ensure proper assembly.
FIGURE 1
MATERIAL CODE MATERIAL CODEPART PARTQ’TY Q’TY
1 1
1
1
1
1
6
7
8
9
10
4
2
6
6
1
2
3
4
5
KFS562F-CS01
KFS562F-CS02
KFS562F-CS03
17C33A0708001Y4
17C33A0703001Y4
17FA05040301-Y4
18000337004
17KAA0101----Y4
61K561FX00001BA
61K561FY00001BA
SEAT ASSEMBLY
PAGE 1 OF 2 COURTYARD CREATIONS INC.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
STOP DON’T RETURN TO STORE!
20
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
3
2
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
!
!
!
!
!

STOP DON’T RETURN TO STORE!
PAGE 2 OF 2
Cleaning and Maintenance
• Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame or fabric parts.
• Cushions may be washed on the surface only by using mild soap and water or a commercial foaming upholstery
cleaner if necessary. If washed, rinse well and hang to dry. Do not machine wash or dry.
• We recommend the use of furniture covers when not in use.
• Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of
your chairs.
• In order to prolong the life and beauty of your chairs, we recommend that it be stored in a dry and protected
area during off season periods.
#7 BOLT M6*12
12
Step 2:
Fasten the back to the legs (#2 and #3) by using bolts
(#7) and washers (#8). Make sure that all of the bolts
have been tightened completely and cover them with
bolt caps (#9). See Figure 2.
Step 3:
Place the cushions (#4 and #5) onto the chair. Secure the
cushions to the chair by using the velcro straps.
See Figure 3.
FIGURE 2 FIGURE 3
FIGURE 4 Step 4:
Attach the two chairs together by following these steps:
A: Place the lock handle through one of the fasteners.
B: Insert the handle into the other fastener.
C: Rotate the handle so that it is 90 degrees to the seat.
3
2
3
3
2
2
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
IF YOU DO NOTLOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCEANY DIFFICULTY DURING ASSEMBLYOR IF ANY
PARTS ARE MISSING OR DAMAGED,CALL THE HELP LINE AT
1-877-539-7436 BEFORERETURNING THIS ITEM TO THE STORE.
PROVIDE THEFOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS
LIST.
MOST PROBLEMS CAN BERESOLVED WITHOUT RETURNING THIS
PRODUCT TO THERETAILER.