Courtyard Creations TGS40NW-WM User manual

4
1
22
2
2
FIGURE 1
Do not sit or stand on this table.
Do not discard any of the packaging until you have checked that you have all the parts and pack
of fittings.
Keep children away during assembly. This item contains small parts which can be swallowed by
children. Children should always be under direct adult supervision while using the product.
Retain the assembly instructions for future reference.
Please quote following FQC NO. when contacting service center.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
Step 1:
Place the table top (#1) onto a non-abrasive
surface, such as a carpet, with its underside
facing up. Insert the legs (#2) into the plastic
holders on the table top (#1) rim. Fasten them
together by using screws (#4). See Figure 1.
You will need the following tools:
- Phillips Screwdriver (Not Included)
- Hex. Key Wrench (See Part #8)
HEX.KEY WRENCH 6MM
BOLT CAP M6
WASHER d6.5*D13*1.0
BOLT M6*16
SCREW ST4.2*12
CENTER CONNECTOR
LEG
TABLE TOP
17KAA0201----Y4
18000337002
17C01A0706002Y4
17FA05040301-Y4
17C17A0403001Y4
62TGS40NWY101
TGS40NW-CS02
8
8
8
1
TGS40NW-CS01
8
7
6
4
5
1
4
1
4
3
2
1
Q’TY
PARTMATERIAL CODE
PART
NO.
Q’TY
PARTMATERIAL CODE
PARTS LIST
PART
NO.
TGS40NW-WM
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
STOP DON’T RETURN TO STORE!
PAGE 1 OF 2 COURTYARD CREATIONS INC.
!
!
!
!
!

FIGURE 3
6
5
7
2
2
3
2
2
FIGURE 2
STOP DON’T RETURN TO STORE!
PAGE 2 OF 2
Cleaning and Maintenance
•Wash frame parts with mild soap and water,
rinse thoroughly, and dry frame completely. Do
not use bleach, acid, or other solvents on the
frame parts.
•Wash glass with mild soap and water, rinse
thoroughly, and dry glass completely.
•Please inspect and tighten all bolts and
fasteners on a regular basis to ensure proper performance and safety of your table.
•When moving the table, do not drag.
•We recommend the use of furniture covers when not in use.
•In order to prolong the life and beauty of your table, we recommend it be stored in a dry and protected
area during off season periods.
Step 3:
Turn the table to its upright position. See Figure 3.
Step 2:
Fasten the center connector (#3) to the middle of
the legs (#2) by using bolts (#5) and washers (#6).
See Figure 2.
Make sure that all of the bolts have been
tightened completely and cover them with bolt
caps (#7).
Missing A Part?
No Need To Go Back To
TheStore!
The store where you made your purchase
does not stock parts for this item
if you need parts,
whether they are missing or damaged.
Call Toll Free
TEL: [phone]
FAX: [phone]
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
PLEASE SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
SHOULD YOU NOTLOCATE ALL OF THE ABOVE PARTS, PLEASE INSPECTALL
PACKING MATERIAL FOR ANY SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED IN SHIPMENT.
SHOULDYOU EXPERIENCEANYDIFFICULTYDURING ASSEMBLYOR IF ANY
PARTIS MISSING OR DAMAGED,PLEASE CALL THE HELP LINE 1-877-539-7436
BEFORERETURNING THEITEM TO THESTORE.
PLEASE PROVIDE THEFOLLOWING INFORMATION:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS LIST
SHOWN ON ASSEMBLY INSTRUCTIONS.
MOST PROBLEMS CAN BERESOLVED WITHOUT RETURNING THIS PRODUCT
TO THERETAILER.
The store where you made your purchase
does not stock parts for this item
if you need parts,
whether they are missing or damaged.
STOP!
MissingAPart?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free
TEL: [phone]
FAX: [phone]