Courtyard Creations TVS36LC User manual

ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
TVS36LC
Use the correct bolts as indicated. Do not tighten any of the bolts until the table is completely
assembled.
Do not sit or stand on this table.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
PAGE 1 OF 2 COURTYARD CREATIONS INC.
!
!
!
!
!
!
PARTS LIST
PART
NO. PART NO.
MATERIAL CODE MATERIAL CODEPART PART Q’TYQ’TY
1 1
2
3
4
5
6
7
4 4
4
1
4
1
1
TVS36LC-CS01
TVS36LC-CS02
TVS36LC-CS03
33G???2CEZB0501
17C17A0403001YX
17FA05040301-YX
17KAA0101----Y4
TABLE TOP
LEG
CENTER CONNECTOR
GLASS
SCREW ST4.2*12
WASHER d6.5*D13*1.0
HEX.KEY WRENCH 4MM
FIGURE 1
2
2
2
25
2
11
Step 1:
Place the table top (#1) onto a non-abrasive surface,
such as a carpet, with its underside facing upwards.
Insert the legs (#2) into the plastic holders attached on
the underside of the table top (#1) rim. Fasten them
together by using screws (#5). See Figure 1.
8
17C33A0706001YX
BOLT M6*16
You will need the following tools:
- Phillips Screwdriver (Not Included)
- Hex. Key Wrench (See Part #8)
E-2

PAGE 2 OF 2E-2
Step 3:
Turn the table to its upright position. Then put the
glass (#4) onto the table top (#1) carefully.
See Figure 3 and Figure 4.
Cleaning and Maintenance
•Wash frame parts with mild soap and water, rinse
thoroughly, and dry completely. Do not use bleach,
acid, or other solvents.
•Wash glass with mild soap and water, rinse
thoroughly, and dry completely.
•Inspect and tighten all bolts and fasteners on a
regular basis to ensure the proper performance and
safety of your table.
•When moving the table, lift. Do not drag this table.
•Cover furniture with outdoor-furniture covers when
not in use.
•In order to prolong the life and beauty of your table,
we recommend that it be stored in a dry and
protected area during off season periods.
Step 2:
Fasten the center connector (#3) to the middle of the
legs (#2) by using bolts (#6) and washers (#7). Make
sure that all of the bolts have been tightened
completely. See Figure 2.
Warranty
•This product is covered by Courtyard Creations Inc. One–year limited warranty.
•Proof of purchase (dated register receipt) is required for warranty claims.
•It remains the customer’s responsibility for freight and packing charges to and from the service center.
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
MissingAPart?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
please visit us at
[email protected]
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
IF YOU DO NOTLOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCEANYDIFFICULTY DURING ASSEMBLYOR IF ANY
PARTS ARE MISSING OR DAMAGED,CALL THE HELP LINE AT
1-877-539-7436 BEFORERETURNING THIS ITEM TO THESTORE.
PROVIDE THEFOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS
LIST.
MOST PROBLEMSCAN BERESOLVED WITHOUT RETURNING THIS
PRODUCT TO THERETAILER.
FIGURE 2
FIGURE 4
FIGURE 3
3
2222
6
4
1
7