Courtyard Creations KUS8529-WM User manual

ASSEMBLY INSTRUCTIONS
KUS8529-WM
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
ATTENTION:
Make sure that each bolt needed for all steps match the
corresponding figure to ensure proper assembly.
STEP 1:
Place the back assembly (#1) onto a non-abrasive surface,
such as a carpet. Insert the back assembly (#1) into the seat
assembly (#2). See Figure 1.
FIGURE 1
KUS8529-CS01
KUS8529-CS02
KUS8529-CS03
KUS8529-CS04
17C33A0755001Y4
17C33A0706001Y4
17C02A0755131Y4
17C33A0710001Y4
17FA05040301-Y4
18000337004
18000337006
17KAA0101----Y4
17KAA0201----Y4
61K8529X00001BA
61K8529Y00001BA
BACK ASSEMBLY
LEFT LEG
RIGHT LEG
BOLT M6*65
BOLT M6*16
BOLT M6*14
BOLT M6*30
WASHER d6.5*D13*1.0
BOLT CAP
PLASTIC CAP M6
HEX.KEY WRENCH 4MM
BACK CUSHION
SEAT CUSHION
PARTS LIST
PART
NO. MATERIAL CODE PART Q’TY
11
1
1
1
2
2
2
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2
2
1
1
1
1
6
6
SEAT ASSEMBLY
HEX.KEY WRENCH 6MM
Do not discard any of the packaging until you have checked that you have all the parts and pack of fittings.
Retain the assembly instructions for future reference.
Please quote following FQC NO. when contacting service center.
Keep children away during assembly. This item contains small parts which can be swallowed by children.
Children should always be under direct adult supervision while using the product.
!
!
!
!
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
STOP DON’T RETURN TO STORE!
PAGE 1 OF 2 COURTYARD CREATIONS INC.
1
2

STEP 2:
At the rear of the seat, fasten the back assembly (#1) to the seat
assembly (#2) by using bolts (#5) and washers (#9). Keep the bolts
loose at this point of assembly. See Figure 2.
STEP 3:
At the front of the seat assembly (#2), fasten the legs (#3 and #4)
to the seat assembly (#2) by using bolts (#6) and washers (#9).
Keep the bolts loose at this point of assembly. See Figure 3.
STEP 4:
At the front of the seat assembly (#2), fasten the legs (#3 and #4) to
the seat assembly (#2) by using bolts (#7). Keep the bolts loose at this
point of assembly. See Figure 4.
STEP 5:
Fasten the left leg (#3) and the right leg (#4) to the back assembly
(#1) by using bolts (#8) and washers (#9). See Figure 5.
Completely tighten all of the bolts and cover them with bolts caps
(#10) and plastic caps (#11).
STEP 6:
Place the cushions (#14 and #15) onto the chair. Secure the
cushions to the chair by using the plastic clamps. See Figure 6.
Cleaning and Maintenance
•Wash frame parts with mild soap and water, rinse thoroughly,
and dry frame completely. Do not use bleach, acid, or other
solvents on the frame parts.
•Cushions may be washed on the surface only by using mild
soap and water or a commercial foaming upholstery cleaner if
necessary. If washed, rinse well and hang dry. Do not machine
wash or dry.
•We recommend the use of furniture covers when not in use.
•Please inspect and tighten all bolts or fasteners on a regular
basis to ensure proper performance and safety of your chair.
•In order to prolong the life and beauty of your chair, we
recommend that it be stored in a dry and protected area during
off season periods.
FIGURE 2
FIGURE 4
FIGURE 6
#5 BOLT M6*65
#6 BOLT M6*16
#8 BOLT M6*30
#7 BOLT M6*14
14 30
16
65
FIGURE 3
FIGURE 5
STOP DON’T RETURN TO STORE!
PAGE 2 OF 2
Missing A Part?
No Need To Go Back To
TheStore!
The store where you made your purchase
does not stock parts for this item
if you need parts,
whether they are missing or damaged.
Call Toll Free
TEL: [phone]
FAX: [phone]
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
PLEASE SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
SHOULD YOU NOTLOCATE ALL OF THE ABOVE PARTS, PLEASE INSPECTALL
PACKING MATERIAL FOR ANY SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED IN SHIPMENT.
SHOULD YOU EXPERIENCEANY DIFFICULTY DURING ASSEMBLYOR IF ANY
PARTIS MISSING OR DAMAGED,PLEASE CALL THE HELP LINE 1-877-539-7436
BEFORERETURNING THE ITEM TO THE STORE.
PLEASE PROVIDE THEFOLLOWING INFORMATION:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS LIST
SHOWN ON ASSEMBLY INSTRUCTIONS.
MOST PROBLEMS CAN BERESOLVED WITHOUT RETURNING THIS PRODUCT
TO THERETAILER.
The store where you made your purchase
does not stock parts for this item
if you need parts,
whether they are missing or damaged.
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free
TEL: [phone]
FAX: [phone]
6
9
10
89 10
59
10
7
11
2
1
3
4
2
4
3
2
3
4
1
14
15
NOTE: The labels marked “L” and “R” on the legs (#3 and #4) should
coincide with Figure 3 to ensure proper assembly.
R
L