Cradlepoint MBR1200B User manual

©Cradlepoint. All Rights Reserved. |+1.855.813.3385 |cradlepoint.com 1
Quick Start Guide /MBR1200B
+ Ideal for small business and home office
+ Automatic failover/failback for business
continuity
+ High performance internal WiFi antennas
+ Plug-and-play support for over 125 of the
most advanced broadband data modems
MBR1200B Key Features:
MBR1200B
Small Business Wireless Router
Learn more: cradlepoint.com/mbr1200b
Power Supply Ethernet Cable
WHAT’S INCLUDED:
THANK YOU FOR
CHOOSING CRADLEPOINT
Cradlepoint is the leading provider of secure,
cloud-managed 3G/4G/LTE networking
solutions for the distributed enterprise with
hundreds or thousands of locations. Our
broad family of high-performance routers are
designed for deployment in mission-critical
applications that require 24x7 connectivity.
Always Connected. Always Protected.

Quick Start Guide /MBR1200B
©Cradlepoint. All Rights Reserved. |+1.855.813.3385 |cradlepoint.com
2
GETTING STARTED
Setting Up the Router
+ Plug the power supply into an electrical outlet, connect the power supply
to the MBR1200B and switch the power to ‘on’.
+ Connect a USB or Express Card Wireless Broadband Data Modem with
Active Subscription, or a Cable, DSL, Satellite, T1, T3, Ethernet Modem.
HARDWARE
LED Indicators
Power
+ Green = On
+ No light = Not
receiving power
LAN
+ Solid = Connected
+ Blinking = Traffic activity
WAN
+ Solid (green) = Connected
+ Blinking (green) = Traffic
activity
USB Type A Modem Status
+ Solid (green) = Connected
+ Blinking (green) =
Connecting
Express Card Modem Status
+ Solid (green) = Connected
+ Blinking (green) =
Connecting
WPS
+ Solid = Active
+ Blinking = Setting
in progress
WiFi 2.4GHZ
+ Solid = On
+ Blinking = Traffic activity
3G/4G Modem Signal
Strength
+ Blinking = 1/2 bar
Failover LED
+ Off = Primary WAN
operating normally
+ Solid (green) = Secondary
WAN is in use
Attention LED
+ Amber = Attention. Check
for courtesy message.
+ No Light = Issues taken
care of.
+ Red = Device booting or
critical system error such
as “No WAN is available.”

Quick Start Guide /MBR1200B
©Cradlepoint. All Rights Reserved. |+1.855.813.3385 |cradlepoint.com 3
Access the Administration Pages
To make configuration changes to your router, open
the MBR1200B’s GUI-based administration pages.
1. Connect to the router via Ethernet or WiFi. For
WiFi, the default SSID is found on the product
label on the bottom of the router.
2. Open a browser window and type “cp/” or
“192.168.0.1” in the address bar and press
return/enter.
3. When prompted for the Administrator password,
type the default eight character password found
on the product.
4. Upon log in for the first time, you are
automatically directed to the First Time Setup
Wizard to configure Admin Password, Time Zone,
WiFi Security, and WAN Failure Check.
FIRST TIME SETUP WIZARD
When you log in to the local administration pages for
the first time, you will be automatically directed to the
First Time Setup Wizard, which will walk you through
basic steps to customize your Cradlepoint MBR1200B.
You have the ability to configure any of the following:
If you are currently using the router’s WiFi network,
you will need to reconnect your devices to the network
using the newly established wireless network name and
password.
To return to the First Time Setup Wizard after your
initial login, select System > System Control on the left
navigation bar and First Time Setup in the dropdown menu.
To restore the router to its factory default settings, press
and hold the RESET button on the side of the device for
ten seconds. Reset returns the login password to the
default password and resets all configuration changes.
+ Administrator
Password
+ Time Zone
+ Security Mode
+ WiFi Network Name
+ Access Point Name
(APN)
+ Modem Authentication
+ Failure Check
Deploy and Manage the
Intelligent Network with
Cradlepoint NetCloud
Cradlepoint NetCloud is a network
management and application
platform that integrates cloud-
based, software-defined networking
with your Cradlepoint devices to
improve productivity, increase
reliability, and reduce costs.
NetCloud includes SD-WAN
capabilities and SD-Perimeter to
enhance the security and scalability
of your network and business
operations.
To learn more and begin a free
30-day trial:
cradlepoint.com/netcloud
Sales & Support: [phone]
Note: The power/attention LED will show yellow until
the user changes the default Administrator and WiFi
passwords. Default passwords must be changed to
secure the router.

ACTIVATE YOUR MODEM
A Cradlepoint router requires a data subscription
to a wireless broadband data plan to connect
to a wireless network. Wireless broadband data
plans are available from wireless carriers such as
AT&T, Verizon, Sprint, T-Mobile, EE, and Vodafone.
Carriers offer several different types of data
plans and Cradlepoint works with most (Mobile
broadband, M2M, and router pricing plans; private
and public APNs; and static or dynamic IP address).
To add or transfer a line of service you will need
to provide a unique identifier such as IMEI/MEID
from the Cradlepoint modem. Data plans require
a SIM that is supplied and provisioned by the
wireless carrier and inserted into the Cradlepoint
router or modem.
For more information on activation see
cradlepoint.com/activation.
UPDATING NETCLOUD OS
Cradlepoint regularly creates new NetCloud OS
packages. You may need to update NetCloud OS
to use the MBR1200B with new modems and to
access our latest features.
Via NetCloud Manager
1. Log in at cradlepointecm.com using your
NetCloud Manager credentials.
2. Navigate to the Groups page.
3. Select a group and click on the NetCloud OS
option in the top toolbar. In the dropdown
menu that opens, select the desired version.
Wait for NetCloud OS to load.
Via NetCloud OS Interface
1. Log into the administration pages. You may
have changed the Administrator Password
when you used the First Time Setup Wizard.
2. From the System menu, select System Control
and System Software.
3. Find the NetCloud OS Upgrade section. This
displays the current version that is installed and
indicates if an updated version is available.
4. Click Automatic (Internet) if a new NetCloud
OS version is available. The MBR1200B will
download and install the NetCloud OS version
and automatically reboot itself. A status
monitor will appear and indicate when this
process is complete. This process may take
several minutes depending on your Internet
connection speed.
ROUTER COMMUNICATION / DATA USAGE
The factory default configuration of the router is set to communicate with Cradlepoint and other resources at regular intervals to access the latest
NetCloud OS and modem updates, clock synchronization (NTP), and NetCloud Manager membership. Such communication may result in data usage and
applicable charges regardless of whether the router uses a wired or wireless Internet connection. To avoid such data usage and potential charges, consult
the following Knowledge Base article:
http://knowledgebase.cradlepoint.com/articles/support/router-communication-data-usage
Quick Start Guide /MBR1200B
©Cradlepoint. All Rights Reserved. |+1.855.813.3385 |cradlepoint.com
4