Craftsman 13235 User manual

CRRFTSMRN
DIGITAL TORQUE WRENCH
User Instructions for Models 13235,13236
NAMES AND FUNCTIONS OF PARTS
5 6
3 A
1 e
g 10 11 13 la
€
SAFETY RULES
8
1. Study this manual carefully before attempting to operate this wrench.
Never apply more torque than the maximum scale reading
a. This torque wrench is designed for manual tightening of threaded
fasteners only.
DO NOT USE IT AS A NUT-BREAKER OR FOR ANY OTHER PURPOSE.
9. Torque value
10. Unit
11. LED indicator
IE. Up/Oown buttons
13.-Zero{ng/Glear4iuttoft
1. Reversible ratchet head
a. Direction Lever
3. LCD readout
4. Buttons
5.-Handle— —
B. Battery cap
7. Ratchet drive
B. Buzzer
or sockets may cause them to suddenly break. Ratchets that are
improperly engaged, worn out, damaged, or over-torqued may slip or break.
TO PREVENT INJURY, KEEP PROPER FOOHNS AND BALANCE AT ALL TIMES.
DO NOT USTTHE WRENCH IN PLACES FROM WHICH YOU MAY FALL
OR SUP,
OR AROUND OPERAHNG MACHINERY.
Torque wrench not in calibration may cause damage to parts or tools.
5. Do not use extensions on handle as damage to torque wrench will result.
6. Handle is not insulated. Do not use on live electrical
or high voltage
circuits.
BEFORE USING THE WRENCH
Battery INSTALLAHON
1. Remove the battery cap.
a. Insert two AA batteries aligning the -h polarities of the batteries
as indicated.
3. Put on the battery cap and rotate it tightly according to the following figures.
ALWAYS USE EYE PROTECTION WHILE USING HAND TOOLS
A WARNING: RISK OF FLYING PARTICLES
A INJURY MAY RESULT FROM ELECTRICAL SHOCK
SPECIFICATIONS
13E35
13336
Model No.
l/E" Ratchet 3/8" Ratchet
Drive
50-a50ft-lbs
aO-lOOft-lbs
Capacity
0.1-ft.lbs
Increments
0.1-ft.lbs
a5.B"
1B.3"
Length
4.30/68.78 (1950)
Weight, Ib/oz (gm)
a.51/40.ai(U40)
ACCURACY: +/-3% on clockwise, +/-4% on counter clockwise.
Complies with American National Standards ASME 8107.38 and ISO 17035.
11/21 (09-13235/13236)

CRRFTSMRN
DIGITAL TORQUE WRENCH
User Instructions for Models 13235,13236
POWER ON ANO ZEROING THE WRENCH
I
Press C to zero the display
ri'ib
M p
1. Once the battery cap is secured in place the torque
wrench is operational.
2. Before using the wrench, press ' C ● to set the
dispiay to read zero,
I
Previous Torque Setting
Press
o
AHENTION
r ^ adjust target value
If an external force is appiied to the torque wrench during power-on/zero or
wake up period, an initiai torque offset wili exist
in the memory.
Cu.u«P
SLEEP MODE
The wrench wiil auto sieep after about 5 minutes to
save battery power.
Power wrench on to wake wrench up.
Current target torque
Turn wrench to apply
force to fastener
RESEHING THE WRENCH
Press C to
Clear peak value
If the wrench does not function normaiiy, remove and reinsert the
batteries, then power on again.
Reach 90% of Target Torque
r . —s| Release Force \
id.u p ^
►
R
LOW BAHERY VOLTAGE INDICATOR
1. If the battery power is low, the wrench displays
a battery symbol and
then turns off after a while.
ISuttr
eapply forced
'0
Show Peak torque
(Flashing )
2. Replace batteries with new ones if the display is
abnormal during
operation.
((...((...(17^ Q
Buzzer Green LED
OPERATING INSTRUCTIONS
Approaching Target
Torque
1. Power on the wrench and the previously set torque will show on the screen.
2. Press-Q or Q to adjust target value.
Affix wrench to fastener.
.W::
ft-lb
3. Turn the wrench to apply force to fastener and the
current torque will
update on display screen.
IBO
((((((«
Buzzer Green & Red LED
-t
4. Stop turning wrench to release force on fastener and the peak torque value
will flash on dispiay screen. The peak torque is the
maximum torque during
wrench turning. Resume turning wrench to tighten fastener. As it nears
target torque the wrench will emit a buzzing sound and green LED will
glow. When target is achieved, wrench will buzz and both green and red
LEDs will glow.
/
\
BAHERY MAINTENANCE
1, When the wrench is not going to be used for an extended period of
time, remove the batteries.
2. Keep a spare battery on hand when going on a long trip or to cold areas.
3. Do not mix different types of batteries such as alkaline, carbon-zinc,
or rechargeable batteries. Do not mix old and new batteries
4. Sweat, oil and water can prevent a battery terminal
from making
electrical contact. To avoid this, wipe both terminals
before loading a battery.
5. Dispose of batteries in a designated disposal area. Do not throw
batteries into a fire.
l O.U . ^
5. Press to clear the current peak value or directly turn wrench again to
obtain another peak value.
ACAUTIONS:
Pess C to zero wrench before any new measurement. Notice to keep the
wrench horizontal and rest during zeroing process.
MAINTENANCE AND STORAGE
A CAUTION:
CRAFTSMAN LIMITED WARRANTY
FDR NINETY DAYS from the date of original sale this product is warranted
against defects in material or workmanship.
WITH PROOF OF ORIGINAL SALE return a defective product to the retailer from
which it was purchased for free replacement. If replacement is not available,
the retailer will provide item price credit usable for other purchases from that
retailer.
If this product needs recalibration within ninety (90j days from the date of
original sale, it will be recalibrated free of charge.
After 90 days you must pay
for recalibration.
This warranty is void if this product is ever used
while providing commercial
services or if rented to another person.
For additional warranty details, see the web page for this item at sears.com
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
Transform SR Brands Management LLC, Hoffman Estates, IL 60179
1. Overtorquing (110% of maximum torque range) the wrench may cause
the gear in the ratchet head to break or wrench data inaccuracy.
2. Do not drop or shake wrench violently.
3. Oo not use this wrench as a hammer.
4. Do not leave this wrench in any place exposed to excessive heat,
humidity, or direct sunlight.
5. This wrench is not waterproof. Do not use it in water.
6. If the wrench gets wet. wipe it with a dry towel as soon as possible. The
salt In seawater can be especially damaging.
7, Do not use organic solvents, such as alcohol or paint thinner when
cleaning the wrench.
8. Keep this wrench away from magnets.
9. Do not expose this wrench to dust or sand as this could cause serious
damage.
10. Oo not apply excessive force to the LCD panel,
11. Apply torque slowly and grasp the center of the handle.
Do not apply load to the end of the handle.
11/21 (09-13235/13236)