Craftsman 351.518580 User manual

Operator's Manual
5" MULTI-JAW BENCH VISE
Model No.
351.51 8580
CAUTION: Read and follow
all Safety Rules and Operating
Instructions before First Use
of this Product.
• Safety
•Assembly
• Operation
•Maintenance
•Parts List
•EspaSol
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www.sears.com/craftsman
16687.02 Draft (10/01/02)

Warranty ...................... 2
Safety Rules ................... 2
Assembly ..................... 2
Operation ..................... 3
Maintenance ................... 3
Parts Illustration and List ........ 4-5
EspaSol ..................... 6-7
FULL ONE YEAR WARRANTY
If this product fails due to a defect in material or workmanship within one year from
the date of purchase, Sears will at its option repair or replace it free of charge.
Contact your nearest Sears Service Center (1-800-4-MY-HOME) to arrange for
product repair, or return this product to place of purchase for replacement.
This warranty applies only while this product is used in the United States.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179
• Read, understand and follow all
instructions in this manual. Misuse
of vise can cause serious injury to
the operator.
• Bolt or clamp vise to work surface at
all three mounting locations using
mounting flanges provided on base.
• Be sure vise is locked in both the
swivel and rotation direction before
attempting to mount workpiece
between jaws.
• Be sure workpiece is clamped
securely between jaws.
• Do not over tighten--vise can devel-
op a large clamping force. Use only
force which is needed.
• Do not try to hold workpieces which
exceed the jaw capacity of vise.
• Do not use vise as a press to
assemble or disassemble objects.
WARNING: Always wear eye and face
protection when striking vise-held
objects or when using power tools with
the vise.
Refer to Figure 1.
*Multi-Jaw Bench Vise comes com-
pletely assembled with jaw plates.
The vise is shipped with a protective
coating. This coating should be
removed before operation. Use pen-
etrating oil to remove protective
coating.
© Sears, Roebuck and Co. 2

DESCRIPTION
Sears Multi-Jaw Bench Vise has a cast
iron body and replaceable hardened
steel jaws. The vise features parallel
jaws, pipe jaws and V-jaws. Vise will
swivel 360° on the base and lock in any
position. The jaws can rotate 360 ° and
lock in any position. Anvil on the body
of vise provides a convenient work sur-
face.
Refer to Figure 1.
•Mount vise to work surface in
desired location by securing all three
mounting flanges located on base
(Key No. 2). Use three 7/_,,diameter
bolts, 2" longer than the bench top
thickness, flat washers and nuts (not
supplied). Do not weld vise to any
metal object. Make sure the bench
top to which the vise is mounted is
properly secured.
° Secure vise in position by hand
tightening the lock handles (Key No.
17). Do not use a pipe extension or
cheater bar. This may cause handles
to bend and overstress locking bolt
threads.
° To adjust the angle of the jaws,
loosen two bolts (Key No. 24), pull
out lock pin knob (Key No. 22) and
rotate the jaws. The lock pin knob
can also be used to quickly set the
jaws at twelve positions, 30 ° apart.
Set the jaws at the required angle
and retighten the bolts.
° Open jaws of vise and place work-
piece between jaws in desired posi-
tion. Secure workpiece between
jaws by rotating leadscrew handle
(Key No. 13). Be sure workpiece is
held securely in vise. Never use
hammer, pipe extension or cheater
bar on leadscrew handle of vise.
Particles of metal or wood can damage
machined surfaces, causing difficult or
inaccurate operation.
• Keep machined surfaces and all
moving parts clean and free of dirt,
chips and foreign materials.
°Keep machined surfaces and lead-
screw lubricated with medium weight
machine oil.

Model 351.51 8580
Figure 1 - Replacement Parts Illustration for Multi-Jaw Bench Vise

KEY
NO. PART NO.
1 09830.00
2 09831.00
3 09832.00
4 17140.00
5 01505.00
6 09834.00
7 09835.00
8 STD840812
9 09847.00
10 17141.00
11 05441.00
12 09837.00
13 20007.00
14 20008.00
15 02688.00
16 09839.00
17 09840.00
18 15033.00
19 20009.00
20 09842.00
21 09843.00
22 09844.00
23 09845.00
24 05805.00
25 17142.00
A 16687.02
DESCRIPTION
Body
Base
Clamping Plate
Stationary Jaw
6-1.0 x 12mm Socket Head Bolt
Jaw Plate
Pipe Jaw Insert
8-1.25mm Hex Nut*
8-1.25mm x 30mm Set Screw
Movable Jaw
6-1.0 x 16mm Flat Head Screw
Movable V-Jaw Insert
Lead Screw with Handle
Spacer
8-1.25 x 25mm Set Screw
V-Jaw Insert
Lock Handle Assembly
Cotter Pin
14-1.5ram Slotted Hex Nut
Lock Pin
Spring
Knob
3CMI-6 Retaining Ring
5-0.8 x 30ram Socket Head Bolt
Rear Cover
Operator's Manual
A Not Shown
*Standard hardware item available locally.
QTY.
1
1
1
1
4
2
3
4
2
1
3
1
1
1
2
1
2
1
1
1
1
1
1
2
1
1

Your Home
For repair - in your home - of all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner's manuals that you need to do-it-yourself.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.
1-800-4-MY-HOME ® Anytime, day or night
(1-800-469-4663) (U.S.A. and Canada)
www.sears.com www.sears.ca
Our Home
For repair of carry-in products like vacuums, lawn equipment,
and electronics, call or go on-line for the nearest
Sears Parts and Repair Center.
1-800-488-1222 Anytime, day or night (U.S.A. only)
www.sears.com
To purchasea protectionagreement on a productserviced by Sears:
1-800-827-6655 (U.S.A.) 1-800-361-6665 (Canada)
Parapedirserviciode reparaci6n
a domicilio,yparaordenarpiezas:
1-888-SU-HOGARsM
(1-888-784-6427)
Au Canadapourserviceen fran£;ais:
1-800-LE-FOYERMc
(1-800-533-6937)
www.sears.ca
(c)Sears, Roebuck and Co.
® Registered Trademark /TM Trademark /SM Service Mark of Sears, Roebuck and Co.
® Marca Registrada /TMMarca de F&brica /SM Marca de Servicie de Sears, Roebuck and Co.
Mc Marque de commerce /MD Marque d6pes6e de Sears, Roebuck and Co.