Creality CR-10 Smart User manual

3D打印机用户使用手册
3D Printer User Manual
V1.0
CR-10 Smart
创造现实，成就梦想
Create reality，achieve dreams
CR-10 Smart

尊敬的用户：
感谢您选择创想三维的产品。为了您使用方便，请您在使用之前仔细阅读本说明书，并严格按照说明书的指示进行操作。
创想三维团队时刻准备为您提供优质的服务。在使用过程中无论遇到什么问题，请按照说明书结尾所提供的电话、邮箱与我们
进行联系。为了您能够更好地体验我们的产品，您还可以从以下方式获取设备操作知识：
随机使用说明：您可以在TF卡内找到相关使用说明及视频。
您还可以登陆创想三维官网(www.cxsw3d.com)寻找相关软硬件、联系方式、设备操作、设备保养等信息。
Dear Consumers,
Thank you for choosing our products.For the best experience,please read the instructions before operating the Printer. Our
teams wiss
always be ready to render you the best services. Please contact us via the phone number or e-mail address provided at the end
when you encounter any problem with the Printer.
For a better experience in using our product, you can also learn how to use the printer in the following ways:
View the accompanied instructions and videos in the TF Card.
Visit our official website www.creality.com to find relevant software/hardware information,contact details and operation and
maintenance instructions.
固件升级
请您登录官网https://www.creality.com/download，切换语言选择相关机型与型号，下载所需固件，安装完成后即可使用。
Firmware Upgrade
Please login the official website https://www.creality.com/download, switch the language and select the relevant printer and
model and download the required firmware, you can use it after the installation is finished.

NOTES 使用须知
1
2
3
4
5
6
7
8
9
10
12
11
请勿尝试任何使用说明中没有描述的方法来使用本机，避免造成意外的人身伤害和财产损失;
请勿将打印机放置在振动较大或者其他 稳定的环境内，机器晃动会影响打印机打印质量;
建议使用厂家推荐耗材，以免造成机器损坏;
请勿将本机放置在易燃易爆物中或高热源附近，请将本机放置在通风、阴凉、少尘的环境内;
请勿在安装过程中使用其他产品电源线代替，请使用本机附带的电源线，电源插头需接插在带有地线的三孔插座;
请勿在操作打印机工作时打开打印机面盖，以免影响打印;
请勿在操作打印机时戴棉手套，以防可动部件对人身造成卷入挤压和切割伤害;
在打印完毕后稍等片刻，带上手套后再取下打印平台，借助工具将平台上的模型取下，请理时请勿直接用手触摸;
常用产品维护同，定期在断电的情况下，用干布对打印机做机身清洁，拭去灰尘和粘结的打印材料、导轨上的异物;
年龄在10岁以下的儿童，请勿在没有人员监督的情况下使用本机，以免造成人身伤害;
本机设有安全保护机制，请勿在开机状态下手动快速移动喷头及打印平台机构，否则设备会自动断电关机保护;
使用者应遵守打印产品与设备所在地及相应国家法律、法规，恪守职业道德，严禁使用我司产品打印有违设备打印产品与设备所在地及相应国家、地区法律
禁止的任何产品或物件。
1
2
3
4
5
6
7
8
9
10
Do not use the printer any way other than described herein in order to avoid personal injury or property damage.
Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a well-ventilated, low-dust environment.
Do not expose the printer to violent vibration or any unstable environment, as this may cause poor print quality.
Please use recommended resin to in case damage of machine.
Do not use any other power cable except the one supplied. Always use a grounded three-prong power outlet.
Please do not open the plastic cover during usage, otherwise the printing will be interrupted.
Do not wear cotton gloves when operating the printer. Such cloths may become tangled in the printers moving parts leading to burns, possible bodily injury, or printer damage.
Please wait a moment after the print is finished. And please wear gloves to take out the print by tools.
Children under 10 years should not use the printer without supervision.
11
12
This machine is equipped with a security protection mechanism. Do not manually move the nozzle and printing platform mechanism manually while booting
up, otherwise the device will automatically power off for safety.
Users shallcomply with related nation and region’s laws, regulations and ethical codes where the equipment or regional laws, regulations and ethical codes where herein
refeffed product and produced prints by it is located.
Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove dust, adhered printing plastics or any other material off the frame,
guide rails, or wheels. Use glass cleaner or isopropyl alcohol to clean the print surface.

Introduction 设备简介 01-01
Parameters 设备参数 02-02
Parts List 零部件清单 03-03
04-08
14-16
09-13
17-19
20-20
21-22
23-28
29-31
FDM 3D PRINTING FILAMENTS 3D打印耗材
Contents目录
Assemble the 3D Printer 组装3D打印机
Use the 3D Printer 使用3D打印机
Troubleshooting 故障检修
Wifi Printing Wifi 打印
Start Printing 首次打印
Wiring Connection电路接线
Warranty Card 保修卡

1. Introduction 设备简介
01
1X Limit Switch X限位开关
2Spotlight 射灯
3Nozzle Kit 喷头套件
4Z-axis photoelectric switch
Z轴光电开关
5Printing Platform 打印平台
6Feeding holder components
料架组件
7Y-axis belt adjusting knob
Y轴皮带调节旋钮
8Tool Box 工具盒
9SD Card Slot SD卡槽
10 LCD Screen 显示屏
11 Network Interface 网络接口
12 Switch control 开关控制
13 X-axis belt adjusting knob
X轴皮带调节旋钮
14 Pull rod 拉杆
15 Screw 丝杆
16 Coupling 联轴器
17 Z-axis motor (Z1) Z轴电机
18 Power outlet 电源插口
19 Y-axis Motor Y轴电机组件
20 X-axis Motor X轴电机
21 Filament Detector 断料检测
22 Extruder Motor 挤出电机组件
16
17
18
20
1
2
3
6
5
7
8
4
9
10
12
11
14
15
19
21
22
13

Basic Parameters 基本参数
Model | 型号 CR-10 Smart
300*300*400mm
FDM
1
0.1mm-0.4mm
Standard 0.4mm | 标配0.4mm
±0.1mm
1.75mm PLA/ABS/TPU/PETG/Wood｜木材
STL/OBJ/AMF
Creality Slicer/Cura/Repetier-Host/Simplify3D
Input| 输入:AC100-240V 50/60Hz Output|输出:DC 24V
350W
≤100℃
≤260℃
Yes | 支持
Yes | 支持
Yes | 支持
Yes | 支持
中文/ English/Español/Deutsch/Français/Русский язык/Brasileiro/Italiano/Türkçe
80-100mm/s
Printing Size | 成型尺寸
Molding Tech | 成型技术
Nozzle Number | 喷头数量
Slice Thickness | 切片层厚
Nozzle Diameter | 喷嘴直径
Precision | 打印精度
Filament | 打印材料
File Format | 切片支持格式
File Transfer | 打印方式
Slice Software | 可兼容切片软件
Power Supply | 额定电压
Total Power | 额定功率
Bed Temp | 热床最高温度
Nozzle Temp | 喷嘴最高温度
Resume Printing | 断电续打
Filament Detector | 断料检测
Dual Z-axis | 双Z轴
Auto Leveling | 自动调平
Language | 语言
Printing Speed | 打印速度
USB/Storage card | 联机或存储卡脱机
2. Equipment parameters 设备参数
02

03
3. Package Content 零件清单
14 M6 Union bolts ×4
M6 活接螺栓 15 M4T Nut ×2
M4T型螺母
x 1
7Filament ｜耗材
x 1
6Spool｜料管
Pull rods｜拉杆
8x 2 9M5x45 Sems Screw
M5x45组合螺丝
×4 10 M5×12 Hexagon flat round
head screw x2
M5x12 内六角平圆头螺丝
13 M6 Screw bolt x2
M6 全螺纹螺栓
11 M5x20 Hexagon flat round
head screws x2
M5x20 内六角平圆头螺丝
12 M5x10 Hexagon flat round
head screws x2
M5x10内六角平圆头螺丝
Storage Card &
Card Reader
存储卡和读卡器
x 1
22
Spade
铲刀
x 1
16 Nozzle Cleaner
通针 x 1
19
Diagonal Pliers
剪钳
x 1
20
Wrench
扳手
x 1
17
Allen wrench
内六角扳手
x 1
21
23
Quick Connect Buckles
快接卡扣
x 2
24
Quick Release Claw
快接卡爪
x 2
x 1
Gantry Frame｜龙门架
2
x 1
Base Frame｜底座
1x 1
Display｜显示屏
3x 1
5Rack｜料架
25
Nozzles
喷嘴
x 2
18 x 1
Socker Spanner
套筒扳手
x 1
4Power Cord｜电源线
Tips: the above accessories are for reference only, please refer to the physical accessories! 注意：以上配件仅供参考，请以实物为准！

4. Install the Gantry Frame 安装龙门架
04
Twist the coupling to raise the X axis
to the position as picture shown.
拧动联轴器使X轴上升到如图所示位置。
Two Z-axis profiles, installed on the
inner step of the Y-axis bottom profile.
两根Z轴型材，靠Y轴底部型材内侧台阶安装。
9M5x45 Sems Screw
M5x45组合螺丝
×4
x 1
Gantry Frame｜龙门架
2
x 1
Base Frame｜底座
1
99
2
1

05
5. Pull Rod Installation 拉杆安装
10 M5×12 Hexagon flat round
head screw x2
M5x12 内六角平圆头螺丝
11 M5x20 Hexagon flat round
head screws x2
M5x20 内六角平圆头螺丝
Adjust the proper length of assembled pull rod and install in the position shown in the figure
拉杆组装调节到合适的长度，安装在图示位置
10
11
11
10

06
6. Install the Rack 安装料架
The material rack can be installed in different positions
on the front and back of the Z axis, and can be folded.
料架可在Z轴前、后不同位置安装，可折叠。
5
6
15
x 1
6Spool｜料管
x 1
5Rack｜料架
Y-axis bottom profile
Y轴底部型材
15 M4T Nut ×2
M4T型螺母
12 M5x10 Hexagon flat round
head screws x2
M5x10内六角平圆头螺丝
12

07
7. Install Limit switch for Z axis 安装Z轴限位开关
Easier to replace the platform and adjust the belt
更换平台更容易，调节皮带更方便
1.Rotate the glass pick-and-place handleplate for platform
replacement.
1.转动玻璃取放手柄压板可进行平台更换。
2.Then manually turn the knob to the appropriate tightness
to avoid belt breakage. (as shown in figure A, three places)
2.然后手动将旋钮左右拧到适合松紧度，过紧容易造成皮带崩断。
（如图所示A三处）
A
A

08
8. Cable Connection 设备接线
2Connect Z-axis motor cable 连接Z轴电机线 3Connect the photoelectric switch wire 连接光电开关线 4 Connect the power cord 连接电源线
1 Connect the 15pin port to the nozzle adapter board as shown in the figure 按图示15pin端口连接喷头转接板
Cable Connection 设备接线
Caution
●Do not connect or disconnect the cables when the machine is powered on.
●当机器通电时，请勿连接或断开连接线。
x 1
4Power Cord｜电源线
Z2 Z1
3
Z2 Z1
Cable buckle
排线卡扣 4
1
2
3
4

09
9. Bed Leveling 调平平台
During the leveling process,please do not touch the Teflon tube and nozzle cable.
调平过程中 ， 请不要触碰铁氟龙管及喷头排线。
>> >>
>> >>
1. Slelct“Level”to automatically level
选择首页调平，即可自动调平
2. After the leveling is completed,adjust the Z-axis compensation value according to the adhesion of the printing consumables and the glass
调平完成后，依据打印耗材与玻璃平台的粘附情况，适当调节Z轴补偿值

10
10. Preheating Method 预热方法
Method 1 方法1
>> >>
Notes: The UI information is only for reference,the actual UI may be different.
注意：界面仅供参考，实际以UI为准。

11
10. Preheating Method 预热方法
>> >>
>> >>
Method 2
方法2
Notes: The print preheating standard is adjusted at the factory, PLA preheating standard: nozzle temperature 200 °, hot bed temperature 60 °, ABS
preheating standard: nozzle temperature 240 °, hot bed temperature 70 °.If you need to adjust it due to printing materials or other reasons, you can
adjust the parameters on the interface home page control → temperature → PLA / ABS preheat setting.
注意：打印预热参数标准出厂时已调整好，PLA预热标准：喷嘴温度200°，热床温度60°，ABS预热标准：喷嘴温度240°，热床温度70°。若因打印材料或其
他原因需要调整，可以在界面首页控制→温度→PLA/ABS预热设置进行参数调整。

11. Load Filament 装料
12
When you wait for the temperature to rise,hang the filament over the Filament Holder.
当您等待温度上升时，把耗材挂在料架上。
For loading filament smoothly,the end of the filament
should be placed as shown above.
为了顺利完成装料，耗材的末端位置应如图所示。

13
11. Load Filament 装料
Whe the current temperature reaches the target temperature,the consumables pass the material breakage detection,and are inserted into the small
hole of the extruder until the position of the nozzle,If the consumables flow out at the nozzle,it means that the consumables have been loaded.
Method of adjusting the tightness of the extrusion spring:Arrow to right is tightening,arrow to left is lossen.(As shown in figure A)
当前温度达到目标温度时，将耗材通过断料检测，插入挤出机小孔直至喷嘴位置，看到喷嘴处有耗材流出即表示耗材已经装载完成。
调节挤出弹簧松紧度方法：箭头往右调松 往左调紧（如图A所示）

12. WiFi Printing WiFi 打印
>> >> >>
>> >> >>
1.Download
8.Select print model
2.Register 3.Log in
1.下载
8.选择打印模型
2.注册 3.登录
4. Scan QR Code
4.扫一扫
5.新增设备
5.Add equipment
6.设置
6. Setting
7.连接WIFI
7.Connect WiFi
14

>>
>>
11. Start Printing 开始打印
Notes: The UI information is only for reference,the actual UI may be different.
15
12. WiFi Printing WiFi 打印