Creality Ender-5 Plus User manual

FR DE ENIT ES
Pour être l’évangéliste en chef Imprimante Ender-5 Plus Guide
Der Top Evangelist sein Ender-5 Plus Drucker Handbuch
Essere un Innovatore Capo Stampante Ender-5 Plus Guida
Ser Evangelista Jefe Impresora Ender-5 Plus Libreto de Instrucciones
Ender-5 Plus 3D PrinterUser Manual 17
V1.0
1
5
9
13
Ender-5 Plus

Preface
Dear consumers,
Thank you for choosing our products. For your best experience,
please read the instructions before operating the Printer. Our 3D team
will always be ready to provide you the best service. Please contact us
via the phone number or e-mail address provided on the last page of the
instruction when you encounter any issue with the Printer.
For a better experience in using our product, you may learn how to
use the Printer in the following ways:
1. View the accompanied instructions and videos in the storage card.
2. Visit our official website www.creality.com You will find relevant
software/hardware information, contact details and operation and
maintenance instructions on the website.
WARNING
Introduction
Use the 3D Printer
Load Filament
Level the Platform
Start Printing
17

WARNING
1. Do not use the printer any way other than described herein in order to avoid personal injury or property damage.
2. Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a well-ventilated, low-dust
environment.
3. Please place your printer under a stable environment in order to achieve hight print quality.
4. Before using experimental or exotic filaments, we suggest using standard filaments such as ABS or PLA to calibrate and test the
machine.
5. Do not use any other power cable except the one supplied. For your safety, you must use a grounded three-prong power outlet.
6. Do not touch the nozzle or printing surface during operation as they may be hot. Keep hands away from machine while in use to avoid
burns or other personal injuries.
7. Do not wear gloves or loose clothing when operating the printer. Such cloths may become tangled in the printers moving parts leading
to printer damage, burns, or personal injuries.
8. When cleaning debris from the printer hot end, please use the provided tools. Do not touch the nozzle when heated. This maybe cause
personal injury.
9. Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove dust, adhered printing
plastics or any other material off the frame, guide rails, or wheels . Use glass cleaner or isopropyl alcohol to clean the print surface before
every print for consistent results.
10. Children under 10 years of age should not use the printer without supervision.
11. Users shall abide by the laws and regulations of the country and region where the equipment is located (used), adhere to professional
and ethical standards, and pay attention to their safety obligations. In all cases, the use of our products or equipment for any illegal
purposes is strictly prohibited. The company is not liable for any legal responsibility arising from any violation.
18

Introduction
13 Antivibration feet
14 Filament Holder
15 Y-axis motor
16 Y-axis limit switch
11 Storage card＆USB
12 Z-axis motor
7Leveling nut
8Hot end
9X-axis limit switch
10 X-axis motor
1BL Touch
2broken filament detecting
device
3Hot Bed
4Main control box
5Power switch
6Touch screen
19

General List

F:Z-axis Frame

D:2040 Aluminum



Tool List
 Image Name Qty
Wrench &
 1set


1set
Spatula
Pliers

Nozzle Cleaner
Power Cable

Spare Parts 1set
USB
A:Top Frame
20

M5X25
8pcs
2040 Aluminum
profile(4Pcs)
Bottom Frame
Ready:
Step 1. Keep the front of the Bottom Frame facing you.
Step 2. Take one of the Aluminum frame pieces and place it in the corner of the bottom frame , On top of the frame, and lined up
with the corner. Notice the hole at the top of piece facing left and right, in relation to the front of the printer. Use 2 M5x25
screws and washers to secure part to the bottom frame.
Step 3. Install the remaining 2 aluminum profile in the same way as Step 3.
Note: Please note that
the hole at the top of piece
facing left and right, in
relation to the front of the
printer.
Frame Assembly Pt. 1
21

Note:
1. Tighten the four screws on the
top, then tight the side screws.
2.Facing your top-side Y-axis
passive block, you can adjust it to
adjust the timing belt tightness
Front
8pcs
M5X25
Ready:
Top Frame
Step 1. Make sure the front of the bottom frame is facing you .
Step 2. 1) Place the Top frame on top of all four aluminum frames.
2) Line up the pre-drilled screw holes on tops of aluminum frame with the holes on top of Top frame and tighten in
place with an M5x25 screw and washer at each corner.
3) After 4 screws on top are tightened, use 4 M5x25 screws and washers to fasten corner brackets in each corner of Top
frames, into corresponding holes on outside edge of aluminum frame
Frame Assembly Pt. 2
22

Behind
8pcs
M5X30
Lift Z-axis Frame Right Z-axis Frame
Ready:
Step 1. Make sure the front of the boom frame is facing you 
Step 2. Place ouble Z-axis frame insie of previously assemblefram The ouble Z-axis frame is mounteon the leanright 2040 aluminum
pro of the top frame anmust be alignewith the aluminum pro Making sure the motor is on the boom, aach the frame to
the lower anupper assembly with a M5x30 screw anwasher at each corn The upper anlower assembly extrusions will have
correspoing pre- holes for these screw
Step 3.
Aer the installan of the ouble Z-axis frame is complete, please check if your Y-axis can move smoothlyIf the movement is
hiereanthe aluminum pro is rubbe, please ajust the eccentric nut anreassemble your Z-axis fram
Frame Assembly Pt. 3
23

8pcs
M4X10 M5X8
2pcs
M5 T-nut
Step 1. Make sure the front of the base(bis facing youPlace the hot beon the support plate of the ouble Z -axis frame analign with the
pro holes on it
Step 2. Using 8 M4x10 screws, connect the hot beto the support plate on the Z-axis fram Make sure the hot beis t anall six
screws are securely fastene
Step 3. Subsequently, pass the M5x8 socket heacap screw through the threaehole on the of the metal plate ent bracket , then pass
the M5 T-nut angently turn the M5 T-nutDo not htenRotate the M5 T-nut that has been installeon the metal plate ent
bracket into a posin parallel to the groove of the aluminum pro aninsert it into the aluminum pro The M5 T-nut below the
metal plate ent bracket is parallel to the groove of the 2040 aluminum pro anis inserteinto itThe upper M5 T-nut on the
metal plate ent bracket is parallel to the 2040 aluminum pro aninlai, then hten the screw with a n Allen key anhten
the M5 T-nut to a posin perpenicular to the groove of the aluminum pro
Hot Bed
Filament Holder
Front
Frame Assembly Pt. 4 1
24

Y
Y
X
X
Z
Select the correct input voltage to
match your local mains (230V or 115V
Bed Cable Connection
Nozzle Cable Connection
BL Touch Connection
Broken filament detecting device Connection
5Pin
3Pin
Cable Connection
25

Manual
Cooling
Automatic
Leveling
Refuel
Disable motor
Printer info
Moving
Language
Choose to Print
Set temperature of Nozzle
Current temperature of Nozzle
Set temperature of the Hot Bed
Current temperature of the Hot
Bed
Screen Information screeninformation
Main Menu Sub Menu Explanation
Storage card Selected file
Stop
Pause/Continue
Adjust
Print speed
Nozzle temp
Hot -bed temp
Z offset fan
fan(off\on)
Temp
Automatic PLA\ABS（185°\220°）
Manual Nozzle preheat
Hot-bed preheat
Cooling yes\no
Fan (off\on)
setting
Leveling
Z-axis：Z home，+0.1mm,- 0.1mm
AUX
leveling
Please click numbers to
assist leveling（①~⑤）
Auto
leveling
Auto leveling, please
wait...
Check level（Measurement parameters）
Refuel Withdraw
Feed
Moving X-axis Y-axis Z-axis Z home
Disablemotor yes\no
Language English\Chinese
Printer info Machine type、Firmware version、
Printing size、website
26

Method 1
Method 2
Loading Filament
1. Preheat 2. Feeding
Tip: How to replace the Filament ？
Press and hold the extruder lever and insert
the 1.75mm filament through the filament
detector and through the extruder motor. Con-
tinue feeding until you see filament extrude
from the nozzle.
1、Cutting filament near the Extruder and slowly feed new
filament until they are fed into the new filament.
2、Preheating the nozzle and withdraw the filament quickly
and feed the new filament.
27

1. Slightly tighten the four leveling nuts at the bottom of the platform before initial leveling.
2. Select “Settings" → “Level mode” → “AUX leveling” , click on the number ②.
3. Adjust the platform height by turning the knob underneath. Use
apiece of A4 paper (standard printer paper) to assist with the adjust-
ment, making sure that the nozzle lightly presses on the paper.
4. Complete the adjustment on all 4 corners.
5. Click the number ① to test the platform height in the middle.
6. Repeat above steps one or two times if necessary.
AUX leveling
1
28

Restore hot end to original
home position
Auto-level the printing surface 16 point precise bed height
measurement
Printer will automatically
Printer will automatically
compensate for variable
bed height
*When using the auto level feature , we suggest that aing a rafrom
the builplate ahesion on in soware sengs
1. In “Settings” → “Leveling m ode”
2. 2mm feeler gauge between the nozzle and the hot bed → If the gap is to o thin or too large, click "Z+" or "Z-" on
the interface to adjust the gap to slightly more than 0.2 mm(the distance between the nozzle and the hot bed should
be about 0.2mm). At 0.2 mm the feeler can easily pass through the gap between the nozzle and the printing platform.
Auto leveling
29

1Double click to install
the so
3Select languageNext Select your machine  Finish
2Double click to
open the so
Software Installation
30

2.Printing
Insert the  Select Print from  Select the file
1.Slicing
Open the so  Select the le Wait for slicing h ,ansave the Gcoe le 
Preparing to Print
Insert  computer with Rea
31

1
Circuit Wiring
32
Storage card

S.A.R.L DU SHENZHEN CREALITY 3D TECHNOLOGIE
18F, bâtiment Jinxiu Hongdu, avenue Meilong, communauté Xinniu,
rue de Minzhi, district de Longhua, ville de Shenzhen.
SHENZHEN CREALITY 3D TECHNIK GMBH
Jinxiu Hongdu-Gebäude 18F, Meilong Avenue, Xinniu-Gemeinde,
Minzhi-Straße, Bezirk Longhua, Stadt Shenzhen.
SHENZHEN CREALITY 3D TECHNOLOGY CO., LTD
Piso 18, Edificio de Jinxiu Hongdu, Avenida de Meilong, Comunidad de
Xinniu, Subdistrito de Minzhi, Distrito de Longhua, Ciudad de Shenzhen.
SHENZHEN CREALITY 3D TECHNOLOGY CO., LTD
Edificio Jinxiu Hongdu 18F, Viale di Meilong, abitazione residenziale di
Xin’niu del Quartiere di Minzhi del Distretto di Longhua della Citta’ di
Shenzhen.
SHENZHEN CREALITY 3D TECHNOLOGY CO.,LTD.
18F, Jinxiu Hongdu Building, Meilong Blvd., Xinniu Community, Minzhi
Street, Longhua District, Shenzhen City.
Official Website: www.creality.com
Tel: [phone]
E-mail: [email protected] [email protected]