Creative CB2462 Owner's manual

a
d
seuT
i e
ga
P
mf.
C
O
T
e
g
a
u
gnaL MP
93:5 600
2 ,
4
1
yr
au
r
b
eF ,y
i
1
.
. . . .
.
. . . .
.
. . . .
.
. . . .
.
. . .
.
. . .
. .
.
.
.
.
.
.
.
.
.
. .
.
h
s
i
l
g
n
E
02.
.
.
.
. . .
.
. . . . . . .
.
. . . . . . .
. .
. .
. . .
.
. .
. .
. .
.
.
. e
çk
rü
T

ii
a
ds
e
u
T i
i e
g
aP
mf.
C
O
T e
g
a
u
g
n
aL M
P 9
3
:5 6
0
02
,
41
y
ra
u
r
b
e
F
,y

1
English
About Your Creative Wireless
Headset CB2462
67
8
9
2
1
3
4
5
1. Multi-function button
2. Volume Decrease button
3. Volume Increase button
4. Mini-B USB charging port
5. Ear hook
6. Red Light Emitting Diode (LED)
7. Blue Light Emitting Diode (LED)
8. Earpiece
9. Microphone
CLA Creative Wireless Headset CB2462.fm Page 1 Friday, August 11, 2006 10:47 AM

2
Getting Started
Your Creative Wireless Headset CB2462 with Bluetooth®technology is one of the latest
and most flexible headsets from Creative. Read on to learn how to get started with your
new device!
1
111111 Charge Your Headset
Fully charge your headset before using it for the first time. To charge your headset, connect
the power adapter to your headset’s mini-B USB charging port. During charging, the red
LED lights up. When your headset is fully charged, the blue LED lights up. This takes
approximately three hours. Consequently, charging your headset takes two hours.
2
2Pair Your Headset and Mobile Phone
Before using your headset for the first time, pair it with a Bluetooth-enabled mobile phone.
1. Place your headset within one meter (three feet) of your mobile phone.
2. Turn on your headset by pressing and holding the Multi-function button until the blue
LED flashes three times.
3. Press and hold the Multi-function button and Volume Decrease button until the blue
and red LEDs flash alternately. You have two minutes to pair your devices before your
headset quits pairing mode.
CLA Creative Wireless Headset CB2462.fm Page 2 Friday, August 11, 2006 10:47 AM

3
4. Turn on your mobile phone’s Bluetooth feature. For more information, see your
mobile phone’s documentation.
5. Set your mobile phone to detect Bluetooth-enabled devices.
6. From the list that appears on your mobile phone, select CB2462Creative.
7. When prompted by your mobile phone for a passkey, enter 0000. The blue LED on
your headset flashes three times when the devices are paired successfully. Some mobile
phones may require an additional connection step after pairing.
You can now start to make and receive calls from your headset. For more usage
information, see section “Using Your Headset” on page 5.
NOTES • You can also pair your headset to a computer with your Bluetooth adapter
(available separately). For more information, see your device manufacturer’s
documentation.
NOTES • To quit pairing mode, press the Multi-function button.
• When you are not using your headset and your mobile phone is turned on, your
headset goes into standby mode. The blue LED flashes once every five seconds.
• When using your headset with your mobile phone, make sure that they are
within 10 meters (32.8 feet) of each other. This distance may vary depending on
your mobile phone’s settings, operation and environment.
CLA Creative Wireless Headset CB2462.fm Page 3 Friday, August 11, 2006 10:47 AM