Crestron HD-CONV-USB-250 User manual

The HD-CONV-USB-250 provides an HDBaseT™ connection for a CCS-UC-1-X Crestron Mercury® Tabletop Conference System in a Crestron Flex UC video conference system.
Check the Box
Item Qty
HD-CONV-USB-250 1
Cable, USB 3.0, A - B, 3 ft (1 m) (P/N 2052534) 2
Power Pack, 24 VDC, 1.25 A, 100-240 VDC (P/N 2045870) 1
Install the Device
The HD-CONV-USB-250 can be mounted onto a surface such as a table with the integrated mounting brackets or simply placed on a flat surface.
Connect the Device
Make the necessary connections as called out in the following diagram.
HDBT:
From HDBaseT source
PWR:
Green LED indicates power supplied
from included power pack
CAMERA OUT:
To UC-ENGINE
CAM IN:
From USB 3.0 camera Ground
CONTENT OUT:
To UC-ENGINE
24V 1.25A:
From included
power pack
HD-CONV-USB-250
HDBaseT® to USB 3.0 Converter

Additional Information
Scan or click the QR code for detailed product information.
HD-CONV-USB-250
Compliance and Legal
Original Instructions: The U.S. English version of this document is the original instructions. All other languages are a
translation of the original instructions.
Regulatory Model: M201931001
As of the date of manufacture, the product has been tested and found to comply with specifications for CE marking.
This product is listed to applicable UL® Standards and requirements tested by Intertek® services.
Ce produit est homologué selon les normes et les exigences UL applicables par Intertek Prestations de service.
Federal Communications Commission (FCC) Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may
not cause harmful interference and (2) this device must accept any interference received, including interference that may
cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Industry Canada (IC) Compliance Statement
CAN ICES-3 (A)/NMB-3(A)
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, please
visit www.crestron.com/opensource.
Crestron, the Crestron logo, and Crestron Mercury are either trademarks or registered trademarks of Crestron
Electronics, Inc. in the United States and/or other countries. HTBaseT is either a trademark or registered trademark of
the HDBaseT Alliance in the United States and/or other countries. Other trademarks, registered trademarks, and trade
names may be used in this document to refer to either the entities claiming the marks and names or their products.
Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in
typography or photography.
©2019 Crestron Electronics, Inc.
Crestron Electronics, Inc.
15 Volvo Drive, Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: [phone]
www.crestron.com
Quick Start - Doc. 8481A
(2054061)
08/30/19
Specifications subject to
change without notice.