CrimeStopper Back Stopper CA-5012 User manual

CA-5012 /Wireless /Top mount/underdash
mountReverse Parking Sensor
Features:
•2-DigitLEDNumericalDistanceDisplay(in
feet)
•Multi-Colored BarGraph Display
•AudibleTonesWithThree DistinctWarnings
DISCLAIMER:
Underno circumstancesshall the manufacturerordistributorofthe Back
Stopper™be heldliableforconsequentialorincidentaldamagessustained
inconnection withthe useorinstallation ofthe Back Stopper™Rear
Detection System.The Back Stopper™isdesigned asasafety
enhancementdeviceand isinno wayintended asareplacementforrear-
viewmirrors,side-viewmirrorsorphysicallychecking the surroundings
when backing avehicle.Always check surroundingsforsafetywhen
backing!
TWODISPLAYTYPES AREAVAILABLE:
1.Top ofdashmount
2.Underdashmount

LOCATINGTHESENSORS:
SENSORINSTALLATION:
1.Carefullymeasureand marksensorlocations.Measure,
double-check and check again.You aremaking permanent
modification tothe vehicle,makesurespacing and angles
arecorrect!
2.Usethe supplied 22MM holesaledrill tomakesensorholes.
3.Routecablethrough hole.
4.Gentlypress insensor.Holeclearanceiscritical,makesure
sensorfitssnugly,butnotover-tight. Crushed sensorswill
provide inaccuratereadingsand falsealarms.
SENSORANGLE:
SIDEVIEW
Horizontal
NO!
Ground mayinterfere
withsensor.
0-10 degree upward
Optimum
performance
Downward
O.K.
(Maynotdetect
small orlowto
ground objects.)
WARNING!Before drillingthehole,makesure thatthesensorwill notbeangling
towardstheground causingthesensortocontinuouslybeep!