CrimeStopper Super Rage CS-2012TW1 User manual

CS-2012TW1
SuperRage™
2-Way AM/FMPaging RemoteAlarm,Keyless EntrySystem&EngineStarting
Systemwith1-Way Sidekick RemoteControl
OPERATINGINSTRUCTIONS
CONGRATULATIONSon yourchoiceofaCS-2012TW1SuperRage™Alarm&RemoteEngine Starterby
CrimestopperSecurityProductsInc.Thisbookletcontainsthe information necessaryforoperating your
system.If anyquestionsarise,contactyourinstallation dealerorCrimestopperSecurityProductsInc.
*IMPORTANTINFORMATION:Primaryand OptionalFeatures
-PRIMARY:Thesearefeaturesthatmustbe connected inorderforthe systemtooperateproperlyi.e.Power,
Ground,Flashing Lights,Siren,LED,etc.
-OPTIONAL:Optionalfeaturesareconnected onlyifdesired oragreed upon bythe installing dealeri.e.Door
Locks,HornHonk,Domelightillumination,TrunkPop,etc.Thesefeaturesmayrequireadditionalpartsand
laborcharges.Consultwithyourinstalleraboutthesefeaturesbeforeinstallation.
CONTACTINFORMATION:
TECHNICALSUPPORT(800)-998-6880
Monday -Friday 8:00am-4:30pmPacific
Website:www.crimestopper.com
E-mail:[e-mail]
CRIMESTOPPER
SECURITYPRODUCTS,INC.
1770 S.TAPOSTREET
SIMIVALLEY,CA.93063 REV.C05.2005
ThisdevicecomplieswithFCC Rulespart15.Operation issubject
tothe following twoconditions:1)Thisdevicemaynotcause
interference,and (2)thisdevicemustacceptanyinterferencethat
maybe received,including interferencethatmaycauseundesired
operation.The manufacturerisnotresponsibleforanyradioorTV
interferencecaused byunauthorized modification tothis
equipment. Suchmodification couldvoidthe user'sauthorityto
operatethe equipment.

TABLEOFCONTENTS
Operation Cautions&Warnings……..………..………………………………………………………….….………2
2-WayLEDPaging Remote………………………………………………………….………..….……….…..……..3
1-Way“SideKick”Non-Paging Remote……………….………..………………………………….……..…..……..4
Paging Tones&LEDs……….………………………………………….………..…………………..….….…..…….5
.
Operating Instructions-Alarm……………………………………………………….………..……………..……..6-9
LEDDiagnostics………………..…………………………………………………………………….………..…..….9
RemoteEngine Control………………………...…………………………………………………….………...…..9-13
OptionalTurbo TimerMode……………………...…………………………………………………………..…..….14
Anti-Carjack Protection...……………………………………….………….……..…………...…………..……...…15
TransmitterProgramming……………………………….……………………………………………..………….…16
PagerRemoteBatteryReplacement……………………………………………….………….……………...……17
Troubleshooting:“Beforeyou call section”………………………………………………..……………………..18-19
OPERATIONCAUTIONS&WARNINGS
CRIMESTOPPERSECURITYPRODUCTS,INC.and itsVENDORSshall notbe liableforanyaccidentresulting from
the useofthisequipment. Thissystemisdesigned tobe professionallyinstalled intoacarorvehicleingood running
order.Items,suchasparking brake,doorswitches,and all engine safetyfeatures,mustbe inperfectworking
condition.
DAMAGEresulting frommisuse ornegligence isNOTcoveredunderwarrantyand will be subjecttorepairand /
orreplacementcharges.
ITISABSOLUTELYTHEOWNER’SSOLERESPONSIBILITYTO:A)Understand the operation ofthissystemand its
safetyfeatures.B)Check forproperoperation ofthesesafetyfeaturespriortoaccepting deliveryofthe vehiclefrom
the installation facility.C)Check and maintainthe condition ofthe vehicleand all itemsrelativetothe properoperation
ofthissystemand itssafetyfeatures.
DONOTremotestartthevehicleinaclosedgarage.Makesurethatthe vehicleisoutdoors,agarage dooris
open,orthereisadequateexhaustventilation.Failuretoobservethisrulecouldresultininjuryordeathfrom
poisonousCarbon Monoxide fumes.Thisisespeciallyimportantwhen using the Timed Self-Startfeatureofthe unit
2

2
-
W
A
Y
L
E
D
P
A
G
I
N
G
R
E
M
O
T
E
PAGER/REMOTETRANSCEIVER:
The hand-heldremotetransceiverisused tosend and receiveinformation from
the vehicle.The ControlModuletransmitsconfirmation signalsfromthe vehicle
toyourpager.Yourrange will varydepending on location,terrain,and localRF
noise/interference.Thissystemisnotguaranteed topage you ifyou arebehind
concretewalls,underground,inalarge structure,orinan area withhigh levelsof
electronicinterference.Handlethe pager/remotewithcare.Formoreon range,
see “Range Questions”on page 18.
OPERATION:
BUTTON1(Lock Symbol):
•Press and releasetoArm/Lock system.
•Press and Holdformorethan 3secondsforPanic.
BUTTON2(Unlock Symbol):
•Press and releasetoDisarm/Unlock systemorresetacycle.
BUTTON3(TrunkSymbol):
•Press and Releasetoactivatetrunkpop (Auxiliaryoutput#1)OptionalFeature.
•Press and holdtoactivateasecond optionalfeature(Auxiliaryoutput#2).
BUTTON4(Start): BUTTONS2+4(TogetherSimultaneously)
•Press foratleast1second toStartEngine •Press and releasetoArmorDisarm
•Press foratleast1second toStop Engine withoutsiren chirp.
BUTTON5(SideButton):
•Press and releasetoshowthe previousstatus.
•Press and holdfor5secondstoswitchtovehicle#2.
BUTTONS1+2(TogetherSimultaneously):
•Press within3secondsofarming todisablesensorinput
•When Disarmed Press and Holdfor3secondstogo intoValetmode and Continue toholdforValetPark
BUTTONS1+3(TogetherSimultaneously):
•When Ignition isON,press for3secondstoactivateCarjack protection
3
UNLOCK
LOCK
STARTTRUNK
#1 #2
#3 ENGINE
POP
VEHICLE
2nd
#5
#4

CrimeStopper
#3
#1
#2
#4
LOCK/
TRUNK
REMOTE
UNLOCK/
FLASHLIGHT
START
#5
ARM
DISARM
2ND VEHICLE
#6
1-WAY“SIDEKICK”NON-PAGINGREMOTE
The 1-Waysidekick remoteaddsflexibility
toyourCS-2012TW1.You havethe
convenienceofoperating yoursystem
withoutneeding tocarrythe pagerremote.
The “Sidekick”remoteoffersall ofthe same
operation featuresremote,exceptthe range
islowerand itwill notreceivepage-back
confirmationsfromthe vehicle.See
diagramatrightforSidekick 1-Wayremote
operation.
BUTTON1(Lock Symbol):
•Press and releasetoArm/Lock system.
•Press and Holdformorethan 3seconds
toactivate“Panic”feature.
BUTTON2(Unlock Symbol):
•Press and releasetoDisarm/Unlock system,orresetacycle.
BUTTON3(TrunkSymbol):
•Press and Releasetoactivatetrunkpop (Auxiliaryoutput#1)OptionalFeature.
•Press and Holdtoactivateasecond optionalfeature(Auxiliaryoutput#2).
BUTTON4(Start):
•Press and releaseforatleast1second toStart/Stop engine.
BUTTON5(Uppersidebutton ofremote):
•Press forconvenientflashlightfunction.The high-powerLEDactsasaminiflashlight.
BUTTON6(Lowersidebutton ofremote):
•Press and releasetoactivatevehicle#2 mode (LEDwill flashfor4secondstousevehicle#2),otherwise
remotewill revertback tovehicle#1.
4

PAGINGTONES &LEDs
CS-2012TW1PAGINGLEDs
Orange/GreenLED:
RedLED:
BlueLED:
YellowLED:DoorTrigger
Shock sensor,
Trunkpop
RemoteStart,
Ignition Lock/Unlock,
Hood/Trunk
PAGE-BACK:
FEATUREBUTTONACTIONBEEPS LEDCOLOR&FLASH
LOCK#1 (Lock)Press &Release1X,then 1XOrange -1X
UNLOCK#2 (Unlock)Press &Release1X,then 2XGreen -2X
AUX#1 #3 (Trunk)Press &Release1X,then 3fastYellow–1long
AUX#2 #3 (Trunk)Press &Hold1XNOPAGEBACK
PANIC#1 (Lock)Press and Holdfor
atleast3seconds1X,2X,12XOrange 12X-Green 1X
REMOTESTART
REQUEST#4 (Start)Press &Holdbutton foratleast1second
1X,3XBlue -3X
ENGINERUNNING
CONFIRMATION6XBlue -6X
TURN OFF ENGINE
(Fromremote)#4 (Start)Press &ReleaseNoBeep NoPage Back
DOORVIOLATION1Long /1shortRed –Flashing
HOOD/TRUNK
VIOLATION5Long Green -5X
SHOCKVIOLATION
1Long /2ShortYellow-Flashing
PRE-WARN 1XYellow–1X
IGNITION
VIOLATION1Long /3ShortBlue -Flashing
5

OPERATINGINSTRUCTIONS-ALARM
Active Arming /Locking:
Press and releasebutton #1 (Lock symbol)on the transmitter.The systemwill armand confirmwithone siren
chirp,one lightflash,and the LEDwill begintoflash.Powerlocks will lock (ifequipped).Starterdisablecircuit
will turnon.Afterashortdelaytoallowthe vehicleand electronics tosettle,the systemiscompletelyarmed.
Disarming:/Unlocking
Press and releasebutton #2 (Unlock symbol)on the transmitter.Systemwill disarmand confirmwithtwo
siren chirps,twolightflashes,and the LEDwill turnoff. Powerlocks will Unlock and InteriorDomelightwill
turnon (ifinstalled withtheseoptionalfeatures)
Disarming WhileTripped(Triggered):
Disarming the Systemwhileitistriggering requiresTWOpressesofthe #2 Unlock Button.The firstpress of
Button #2 Resetsthe alarmcycleonly(systemstill armed)whileasecond press will disarm/unlock the system.
SilentArming/Disarming (Ondemand):
ToArmorDisarmthe systemwithoutsiren chirps,press and releasebothButtons#2 (Unlock)and #4 (Start)
atthe sametime.Systemwill ArmorDisarmwithoutsiren chirpsthatone time.Flashing lightsand LEDwill
be the onlyindicatorsofArm/Disarmstatus.If the systemwastripped whileyou wereaway,4chirpswill be
heardtonotifyyou thatthe systemwastripped.
SilentArming/Disarming (ChirpDefeat):
Thissystemcan be programmed tosilentarmand disarmusing the normallock and unlock buttons.Flashing
lightsand LEDwill be the onlyindicatorsofarmed ordisarmstatus.Check withyourinstallerorfollow
programming option instructionsinthe installation manual.
RemotePanicProtection
Tosound the alarminan emergency situation ortodrawattention toyourvehicle,press and holdButton #1
(Lock)foratleast3secondsuntil the siren sounds.Press Button #2 (Unlock)toresetpanicmode.
Driver’sPriority/SplitUnlock (Optional)
When using the optionalseparatedriver’sand passengerunlock function,press and releasebutton #2
(Unlock symbol)on the transmittertounlock driver’sdooronly,then press the #2 button againwithin2-4
secondstounlock remaining doors.Thisfeatureisoptionaland requiresadditionalpartsand/orlabor
Arming WithShock SensorBypass
Toarmthe alarmand bypass shock sensorprotection,press Button #1 asnormalthen press and release
Button #1 and #2 togetherwithin2seconds.You will hear3extrasiren chirpsindicating shock sensorbypass
forthisarming cycleonly.6

OPERATINGINSTRUCTIONS-ALARM
AlarmTriggering
Anintrusion intothe vehicleorhardimpacttothe bodywill sound the alarmand flashthe lightsfor1minute.
After1minutethe triggercyclewill automaticallystop and alarmwill remainarmed tocontinue protecting the
vehicle.If adoorisleft open afteran intrusion then the unitwill cycleamaximumof5minutesand continue to
protectthe otherun-tampered orunopened zones.
Priorintrusion Alert
Thissystemwill notifyyou ifthe alarmwastripped whileyou whereaway.Upon disarming,the twonormal
disarmchirpswill be heardthen the systemwill emit4additionalsiren chirps.Check yourvehicleforany
signsofabreakinortampering.Alsosee LEDDiagnostics Section todetermine the causeofthe trigger.
OpenZoneAlert/Bypass
Upon arming,thissystemwill warnyou ifadoorisleft open.Aftera60 second setup delay(forextended
domelights)haselapsed,ifthe systemdetectsafaultoradoorleft open,the siren will chirp5timesalong
with5lightflashes.Thiszone will be automaticallybypassed and the alarmwill protectall otherzones.
Pre-Warning Shock Protection
The Pre-warning (warn-away)featurewill activatewhen alow-levelshock orvibration detected bythe
system’sshock sensor.The alarmwill chirpthe siren 5timesand flashthe lightsoncetohelpdeterany
furthertampering withthe vehicle.
Passive Arming Mode:(Programmable)
Passive(automatic)arming occurs30 secondsafterthe ignition isturned off and the lastdoorisclosed.Upon
closing the lastdoor,the unitwill flashthe lightstwiceand LEDwill be flashing rapidlytoconfirmpassive
countdown.If adoorisreopened withinthe 30 second period,the countdownstop and beginagainwhen the
doorisclosed.Passivearming providesfailsafeprotection incaseyou forgettoarmthe system.
Passive Locking:(Programmable)
The CS-2012TW1systemcan be programmed topassivelylock the doorswhen the systempassivelyarms.
The defaultsetting isOFF becausepassivelocking increasesthe risk oflocking the keys inthe vehicle.
Trunk/HatchPop (Optional, RemoteAUX.Output1)
Thisfeatureisdesigned tointerfacewithexisting Factorypowertrunkorpowerhatchreleasesystemsand
mayrequireadditionalpartsand/orlaborcharges.Press and releaseButton #3 (Trunk)on the transmitterto
pop/open the trunk/hatch.If the systemisarmed,itwill alsodisarmwhen the button #3 ispressed.
7

OPERATINGINSTRUCTIONS-ALARM
RemoteAUX.Output2(Optional)
Thissystemcontainsasecond auxiliaryoutputtoactivateotheraccessoriesordevices.Toactivatethe
systems’Second AuxiliaryOutput, press and holdButton #3 (TrunkSymbol)on the transmitterformorethan 2
seconds.Thisisamomentaryoutputthatwill stayactiveaslong asthe remotebutton ishelddown.Remote
output#2 requiresprogramming beforeoperation.Check withyourinstallerorfollowprogramming option
instructionsinthe installation manual.
DomeLightIllumination (Optional)
Thisfeaturewill turnon the vehicle’sdomelightupon disarming for30 secondsoruntil the keyisinserted and
turned on.Thiswill provide illuminated entrytoyourvehicleindimlylitareasforsafetyand security.
Emergency Override(Disarm)
If you havelostthe transmitteroritstopsworking foranyreason and the Alarmisarmed,you will haveto
disarmthe systemmanually.Open the doorwiththe key[alarmwill sound], turnthe ignition on,and press the
override/programbutton forabout5seconds.The Alarmwill disarmand allowyou tousethe vehicleuntil you
can repair/replacethe remote.Noteyou havetoputthe systemintovaletmode topreventpassivearming.
ValetMode(Entermanuallyorusing theremote)
TodisableAlarmand RemoteEngine Starting forvehicleservicing orotherwise,turnthe ignition on and press
the override/programbutton [about5-7seconds]until you hear(3)siren chirpsand the LEDturnson solid.
Repeatthe process toexitVALETmode.Toenter/exitvaletviathe remote,press and holdbothbuttons#1
(Lock)and Button #2 (unlock)togetherforabout3secondsuntil 3chirpsareheard.Repeatthisstep toexit
viathe remotetransmitter.Lock/Unlock and AUXfeatureswill still operateinwhen inVALETmode however
remotestartand alarmfunctionsareinhibited.
ValetParkMode(Using theremotetransmitteronly)
Note:ValetParkmode isonlyaccessiblewhen using the remotetransmitter.Valetparkmode allowsyou to
turnoverthe vehicletoavaletallowing access todrive/lock/unlock yourvehicle,butalarmwill triggerifthe
trunkisopened.ToactivateValetPark,press and holdbothbuttons#1 (Lock)and Button #2 (unlock)
togetherforabout6seconds.3chirpswill be heardfirstwhen unitgoesintoregularValetand asyou
continue toholdbothbuttonsyou will hear2morechirps.LEDwill flashslowlywhen inValetPark.Repeat
step toexitValetParkmode.
8

OPERATINGINSTRUCTIONS-ALARM
OptionalM.A.P.(MobileAccessories Protection)
Thissystemcan be programmed toprovide Crimestopper’sunique M.A.P.(MobileAccessoriesProtection)
featurethatallowsyou topreventunauthorized access ofyourvehiclesAudio,Cellular,Navigation,or
Entertainmentsystems.ThisfeatureisOPTIONALand will requiresextrapartsand laborforinstallation.
Consultyourinstallation dealeraboutMAP beforeorduring installation.The CS2012TW1mustbe
programmed forMAP operation.When the systemisputintoValetParkmode,M.A.P.will preventstereo,
entertainment, navigation,orcellularsystemfrombeing used.BasicM.A.P.wiring information isprovided in
the installation manual.
LEDDIAGNOSTICS
The CS-2012TW1systemincludesdisarmdiagnostics,through the REDLEDlight, thatwill helpin
determining whatcaused the lasttriggerofthe alarmsystem.Thisisavaluabletoolindetermining howthe
vehiclewastampered withorifthereisafalsealarmprobleminwhichcaseyou can makethe necessary
adjustmentstocorrectthe problem.When the systemisdisarmed withthe remoteyou will hearthe normal2
chirps,then 4quick chirpsthatindicatethe alarmwastriggered whileyou wereaway.Check the LEDlightfor
asequenceofflashes:
Shock Sensor=1FlashDoor=2FlashesHood/Trunk=3FlashesIgnition =4Flashes
Diagnostics will resetwhen the Ignition isturned on orwhen the systemisre-armed.
REMOTEENGINECONTROL
REMOTEENGINESTARTING-SUCCESSFULSTART
1)Press and releasethe remotestartbutton foratleast1second.Systemwill chirp3timesforaudible
confirmation.(Chirpscan be programmed on oroff-See Option programming inthe installation manual.)
2)Parking lightsflashonce,then turnon solid,Ignition/Accessorycircuitsturnon.
3)After6secondsStarterMotorengages,Parking lightsand Accessorycircuitsturnoff whilecranking.
4)Engine Startsand Runs.Parking Lightsand Accessoryturnback on,DoorsLock.
5)Engine will remainrunning forprogrammed run timeuntil resetwithBrakepedal.If needed,the engine can
be turned off withremotetransmitter.
9

REMOTEENGINECONTROL
REMOTEENGINESTARTING-SUCCESSFULSTARTDIAGRAM:
REMOTEENGINESTARTING-UNSUCCESSFULSTART
Inthe eventthatthe engine doesnotstarton the firstattempt, the systemshutsdownforafewseconds,then
attemptstorestartthe engine a2nd and 3rdtime.Forhardstarting engines,the unitwill allowastartercrank
timeofup to10 secondsmaximum.Thisshouldprovide amplecranking timefordifficultstarts,butislimited to
10 secondstohelppreventdamage tothe starterfromovercranking.
1)If engine startson 2nd or3rdattempt, see steps4&5(lastpage)of"SuccessfulStart".
2)If Thirdattemptfailstostartengine,the systemwill turnoff and doorswill remainlocked.NOFURTHER
ATTEMPTSWILL BE MADEAUTOMATICALLYUNLESS YOUPRESS THESTARTBUTTONAGAIN.
TURNINGOFF AREMOTESTARTEDENGINE:
1)Engine isrunning inRemoteStart(Parking lightsON).
2)Press and releasethe Startbutton foratleast1second.
3)Engine &parking lightsturnOFF,Doorsremainlocked orwill re-lock ifapplicable.
TURNINGOFF AREMOTESTARTEDENGINEDIAGRAM:
ENGINE&LIGHTSOFF
START
10
AFTER
IGN
3
STARTER
THEN
FLASH1X
SOLID
SOLID
SEC.
START

REMOTEENGINECONTROL
ENTERINGYOUR REMOTESTARTEDVEHICLE:
1)Withengine running,RemoteUnlock/Disarmsystem(If armed)oropen doorwithkey.
2)Entervehicleand be carefulnottostep on brakepedal!(RemoteStartReset)
3)TurnIgnition toON/RUN position,then press brakepedaltoresetthe RemoteStarter&Shift outofpark.
4)Remotestarterwill resetinstantlywhen the brakeispressed.Parking lightswill turnoff and the ignition key
isnowcontrolling yourvehicle.
IDLEDOWNMODE(TAKE-OVEROPERATION)
Thismode allowsthe unittotakeoveroperation ofyouridling,parked vehiclewhilethe ignition keyis
removed and you exitthe vehicle.The vehicleisputintoaremoterunning condition beforeyou exitand itwill
remainrunning forthe programmed run time,until you return,oruntil the remotestartbutton ispressed.
Examples:
You pull up toaconveniencestoreforacoffee,"IdleDown"mode keepsengine running when you exitthe vehicle,(withkeys in
hand)remotelock/arm alarm.When you return,unlock/disarm alarm,turnignition ONand driveaway.
IDLEDOWNMODE-EXITINGTHEVEHICLE:
1)Withengine running,press and releasethe Startbutton.Siren will chirp3timesforconfirmation.
2)Parking Lightswill turnON.
3)Doorswill unlock,orifbrakepedalisbeing depressed then doorswill unlock when itisreleased.
4)TurnOFF Ignition and removekey.Engine shouldremainrunning.
5)Exitvehiclethen remotelock doorsifdesired.
6)Engine will remainrunning forprogrammed run time,until you return,orpress the remotestartbutton.
IGN
SOLID
OFF
UNLOCK
START
ENTERINGAVEHICLEDURING“IDLE-DOWN”or“INFINITYRUN”MODES:
See “ENTERINGYOUR REMOTESTARTEDVEHICLE”section above.
11

REMOTEENGINECONTROL
INFINITYRUN MODE
Thismode allowsthe vehicle’sengine toremainrunning INDEFINITELY.Thismode can be beneficialtolaw
enforcementvehiclesorcommercialvehiclesthatneed toremainrunning unattended forlong periodsoftime.
INFINITYRUN MODE–EXITINGTHEVEHICLE:
1)Followstepson the lastpage for“IDLEDOWNMODE-EXITINGTHEVEHICLE”,exceptpress the remote
startbutton TWOtimesatSTEP #1.
2)Parking Lightswill startflashing instead ofcoming on solid,and doorswill unlock.
3)TurnIgnition switchOFF,removekeyand exitthe vehicle.Engine shouldremainrunning.
4)The vehicle’sparking lightswill flashforthe programmed run timeof12,24,or36,or48 minutesand then
switchtosolidwhilemotorrunsindefinitelyoruntil fuelsupplyrunsout.
IGN
OFF
2X
FLASHFORPROGRAMMED
RUN TIME,THENSOLID
START
ENTERINGAVEHICLEDURING“IDLE-DOWN”or“INFINITYRUN”MODES:
See “ENTERINGYOUR REMOTESTARTEDVEHICLE”section attop ofpage 11.
12

REMOTEENGINECONTROL
TIMEDSELF STARTMODE
Thismode allowsthe vehicletobe programmed toself-startevery4hoursand run forthe programmed run
time.Thiscan be helpfulduring extremelycoldconditionswhereengine fluidfreeze-up isaconcern.THE
VEHICLEMUSTBE OUTDOORSORINAWELL VENILATEDAREA.
TIMEDSELF-STARTMODE–EXITINGTHEVEHICLE:
1)Haveengine running withthe Key,then press and releasethe Startbutton.
2)Withinthe next10 secondspress the valet/programbutton once.
3)Parking Lightswill turnOFF forabout5seconds,and doorswill unlock.
4)TurnIgnition switchOFF,removekeyand exitthe vehicle.Engine shouldremainrunning.
5)Toturnoff the engine,press the remotestartbutton.The parking lightswill flash4TIMES asa
confirmation thatthe unitisinTimed Self-StartMode.
6)The Vehiclewill Startbyitselfevery4hoursuntil driven withkeyorstarted viaremotecontrol.
IGN
SOLID
OFF
UNLOCK
PRESS 1X
WITHIN10 SEC.
LIGHTSOFF 5SEC.
FLASH4X
LOCK
START
START
RESETTINGTIMEDSELF STARTMODE
Toresetthe timed self-startmode,startthe vehicleusing the keyorthe remotecontrol
13

OPTIONALTURBOTIMERMODE
OPTIONALTURBOTIMERMODE:
IMPORTANTNOTE:Thismoderequires theuse ofanextrapartcalledamomentaryswitchorbutton
thatisnotincludedwiththekit.Check withyourinstalleraboutadding thisfeature.Theoptional
Turbo Timermodeallowstheyoursystemtokeepyourvehiclerunning for1to5minutes [selectively]
afteryou remove thekey,exitthevehicle,and lock thedoorsremotely[ifyou ownaTurbo orTurbo
Diesel].Thisishandyforturbo cooldownwithouttheneedforexpensive Turbo Timers.
1)Engine shouldbe running withthe key.Press and holdthe brakepedal.
2)Press your“Turbo Timer” button 1to5timesforeachminuteofrun timeyou desire.(1press =1min.)
3)Releasethe brakepedaland yoursystemwill confirmbyflashing the lightsthe samenumberoftimesthe
button waspressed.
4)TurnIgnition switchOFF,removekeyand exitthe vehicle.Remotelock yourdoorsforsafety.The engine
shouldremainrunning forthe selected numberofminutes.
CAUTION!! IFYOUPRESS THETURBOTIMERBUTTONWHENENGINEISNOTRUNNINGITWILL
TRIGGERAREMOTESTART!MAKEANOTEOFTHISIFYOUHAVE CHILDREN.CONSIDERTHIS
WHENCHOOSINGALOCATIONFORYOUR TURBOTIMERBUTTON.
REMOVE KEY
PRESS TURBO
FLASH1-5X
EXITVEH.
PRESS
AND HOLD
BRAKE
TIMERBUTTON
1-5TIMES
RUNNINGRELEASE
BRAKE
LIGHTS
RUNNING
REMAIN
1-5MIN.
14

ANTICARJACK PROTECTION
REMOTEOPERATEDCARJACK PROTECTION
ThisfeatureprovidesActiveCarjack protection through the remotecontrol.When the Ignition ison (vehicleis
running),press and holdthe #1 LOCKButton and #3 TRUNKButton for3seconds.The parking lightswill
flash2timesand the LEDwill begintoflashrapidlytoconfirmthe beginning ofaCarjack countdown.30
Secondslater,the unitwill beginaCarjack Cycleconsisting of20 secondsofpre-warning chirpsturning intoa
full systemactivation withsiren /flashing lightpulsesforup to5min.If the Ignition isturned off during a
Carjack triggerthe siren and lightsstop butCarjack protection isstill active.The Siren and Lightswill resume
ifthe Carjackertriestoturnthe Ignition back ON.TORESET:Press Button #2 (UNLOCK)on the remoteand
the siren will chirponce,orturnthe keyon and press and holdthe override button foratleast5seconds.
SWITCH-CONTROLLED&FULL TIMECARJACK (PINK WIRECONFIGURATION)
Thisfeaturecan provide PassiveorManualcontrolCarjack protection depending on the configuration ofthe
PinkCarjack wireofthe alarmsystem.The systemmustbe programmed forthe Pinkwiretobe used asa
Carjack triggeratProgramming Option #8 inthe Installation Manual.Oncethe Pinkwireisprogrammed to
serveasaCarjack trigger,itcan be configured indifferentways toprovide differentlevelsofprotection.It can
be connected toahidden +12Vtoggle/momentaryswitchorto+12VIgnition Power.See installation manual.
Read the sectionsbelowforfurtherdescriptions.
HIDDENSWITCH CONTROLLEDCARJACK:
Thisconfiguration will enablethe vehicleownertoactivateaCarjack countdownbypressing ahidden
push-button (notincluded withkit)during aCarjack situation.ACarjack countdownwill beginunderthe
following conditions:Ignition isON(vehicleisrunning),the push-button ispressed,and the door
opens/closes.Upon these3events,inthatorder,the alarmwill startaCarjack countdown.Afteradelayof
one minute,the systemwill beginchirping for20 secondsthen triggerintoafull cycleforup to5minutes.
ToresetthisCarjack mode,Ignition mustbe ONthen press and holdthe override/valetbutton for5
seconds(until LEDgoesout.)
FULL-TIME[Permanent] CARJACK WITHIGNITIONON:
Werecommend thatthisconfiguration onlybe used inserioussituations.When the Ignition ison (vehicle
isrunning),anytimeadoorisopened the Carjack countdownsequencewill be initiated.Therewill be 2
lightflashesand the LEDwill change fromsolidtoquick pulsing asconfirmation ofacountdownsequence.
ToresetFULL TIMECarjack,the Ignition hastobe ON,then press and holdthe override/programbutton 5
secondsuntil LEDstopspulsing.The LEDwill be on SOLIDwhen inthismode anytimethe Ignition isON
(orwhiledriving)asareminderthatCarjack iswaiting foradoortoopen.
15

TRANSMITTERPROGRAMMING
Note:Remotes Transmitterscomepre-programmedfromtheFactory.Whenre-learning remotes or
adding remotes,ALL yoursystem’sremotecodes mustbelearnedattimeofprogramming!! This
systemallowsstorageofup to4differentremotecodes inmemory.
1.Open hood (ground the Blue hood pinwireifno hood pinisinstalled.)
2.Turnkeytothe ONposition.(Starting the vehicleisnotnecessary.)
3.Press Program/Valetbutton 4times.Afterafewseconds,the unitwill flashthe parking lights4times.
4.Press Button #1 (Lock)&#2 (Unlock)button [atthe sametime]ofthe transmittertobe learned.You should
get2lightflashesindicating the code-learn.Press the Lock and Unlock Buttonson asecond,thirdor
fourthremote.If all 4codesarelearned,the unitwill automaticallyexitcode learning mode,otherwiseturn
keyOFF and closethe hood.
NOTES:When learning pagerremotes,waitforabeep confirmation tone fromthe remotebeforelearning
anotherremote.When learning 1-way“Sidekick”remotes,you do nothavetowait. The systemwill notflash
the lightsafterlearning the 4thremotecode.
IGN
OFF
WAITFOR
4FLASHES
PRESS 4X's
FLASH2,3,or4X's
(BLUEWIREGROUNDED)
IGN
OFF
PRESS TOGETHER
LOCK &
UNLOCK
16

PAGERREMOTEBATTERYREPLACEMENT
CS-2012TW1PAGER(LOWBATTERYWARNING)
The CS-2012TW1PagerLEDhasalowbatterywarning system.When the batteryvoltage islow,the Orange
&Green LEDsflash6timeswithanybutton thatispressed.Werecommend replacing the batteryforproper
operation.Toreplacethe battery,simplyunlock and slide open the batterydooron the back ofthe LED
remote.Carefullyremovethe lowbattery,then insertanewbattery(AAA)using the outline on the button of
the batterycompartmentasaguide.Yourremotewill beep 3timeswhen the batteryisinserted correctly.
NOTE:
Carefullyinsertthe newbattery.If done correctlythe remotewill beep 3Xwhen the newbatteryinstalled.If
the remotedoesnotbeep orrespond afterreplacing the battery,removethe batteryand re-insert.
17

TROUBLESHOOTING:“BEFOREYOUCALL SECTION”
Beforecalling yourdealerorCrimestopper,read the following fortipsthatmayremedythe problem.
RANGEQUESTIONS(2-Way Pager/Remote):
YourCS-2012TW1systemusesAm&FMHigh-Frequency signalstosend/receivedatabetween the pager
and the vehicleand fromthe vehicletothe remoteforstate-of-the-artoperation.
1)Undernormaloperation,the distancefromthe vehicle-paging-the-remotewill be greaterthan thatfromthe
remote-to-the-vehicle.Thisisdue topowersupplies.The maincontrolmodule(brain)inthe vehicleis
connected tothe electricalwiring receiving powerfromthe vehiclebattery,whereasthe remote/pageris
operating fromthe 3VLithiumbattery.Thisisanormalfeaturefora2-Waypaging system.
2)Yoursystemisdesigned toalways operatewithmaximumefficiency,howeverrange maybe affected by
the following circumstances:PhysicalDistance,Obstructions,and RF/ElectronicInterference.(On
US/Domesticsystems,poweroutputislimited byGovt. FCC Regulations/Specifications.)
3)ThisCS-2012TW1systemdoesNOTuse“Paging”or“Cellular” antenna service.Thereareno monthly
feesassociated withitsoperation.The CS-2012TW1unitinthe vehiclesendsapaging signaldirectlyto
yourpager/remotefromitsownantenna mounted inside the vehicle.
SYSTEMISUNSUCCESSFULATREMOTESTARTDURINGEXTREMECOLDCONDITIONS:
Pleasebe awarethatduring sub-freezing conditionsyourremotestartermaytakemorethatone attemptto
start, oritmaynotsuccessfullystartthe vehicleafter3attempts.During theseconditionsthe vehiclemaynot
properlystarteven using the key,thereforetrying tostartbythe remotewouldalsobe unsuccessful.
SYSTEMLEDFLICKERSWHENPRESSINGREMOTECONTROLBUTTONS:
Thisisnormaloperation.Theremaybe aslightflickervisiblefromthe LEDwhen pressing the remoteasthe
systemisauthorizing the code fromthe remotecontrol.Thereisnothing wrong withyoursystem.
UNITCHIRPS 3X,FLASHES LIGHTSONCE,BUTWILL NOTATTEMPTAREMOTESTART:
1.The systemmaysenseafaultifthe vehiclehood isup oropen (Blue wiregrounded).[Assuming you are
using agrounding hoop pinorswitchthatisconnected tothe Blue wireofthe system.Thisisasafety
featureofthe unit. Makesurehood isclosed orthatthe Blue hood pinwireisnotshorted toGround.
2.The systemmaysenseafaultatthe Brake(Whitewireisactive)check installation forfaultsand verifythe
+12VBrakeinputisnotactiveunless the brakeispressed.
18

TROUBLESHOOTINGcont.
UNITFLASHES THELIGHTSONCEAND WILL NOTATTEMPTAREMOTESTART:
The systemisinValetmode.Check the systemsLEDlightand ifitison solidRed LED(withdoorsclosed)
then the systemisinVALETmode.ToexitVALET,turnthe Ignition on,press and holdvalet/programming
button forabout5secondsuntil LEDgoesout. Unitisnowoutofvaletmode and shouldperformaremote
start.
SYSTEMDOES NOTRESPOND TOTHEREMOTECONTROL:
1.Check forproperpower/ground wiring connectionsofthe alarm.
2.Check Antenna Moduleconnection.The antenna included withthissystemmustbe plugged into
send/receivesignalsasthe Antenna Modulegetsvoltage fromthe maincontrolmodule.See antenna
diagramsection inInstallation Manual.NOTEthe colorofthe antenna harness connectorsmustmatch
withthe colorsofthe socketsi.e.Blue plug intothe Blue socketand Black plug intothe Black socket.
3.The Remotemayneed anewbatteryorneed tobe reprogrammed tooperatethe system.See
“Transmitterprogramming”formoreinformation.
19

www.crimestopper.com
[e-mail]
Phone [phone]
FAX [phone]
©2005 CrimestopperSecurityProducts
ONLINETECHNICALSUPPORT
www.crimestopper.com/techweb03.html