Cubii Go+ User manual

Owner’s Manual
PORTABLE COMPACT ELLIPTICAL

TABLE OF CONTENTS
Before You Begin .......................................................................... 2
Safety Instructions
Consult Your Physician
Getting Started.............................................................................. 4
Product Size and Weight
What’s in the Box
Warning Labels
Serial Number Location
Assembling Your Unit ................................................................. 6
Using Your Cubii Go+ .............................................................. 10
Transpor ting
Positioning
Adjusting the Resistance
Using the Chair Wheel Cup
Charging Your Cubii Elliptical
Battery Life and Power
Reading the Display Console
Connecting with Devices
Installing and Pairing with the Cubii App
 OfineMode
Bluetooth® Related App Features
General Information ................................................................. 21
Return Policy and Warranty
Troubleshooting
Care and Maintenance
Important Health & Safety Instructions
Sensors and Motors
Regulatory Notices

1
Welcome to the Cubii Communitii™!
Whetheryouaretakingtherststeponyourtnessjourneyor
looking to get more exercise from the comfort of home, bringing
the Cubii Go+ into your routine is a big stride toward a healthier,
more active life! Before you begin, we want you to be familiar with
important information on how to use Cubii Go+ safely so that you
and your loved ones get the most out of your experience.
Let’s review the safety notes and warnings now.
If you have any questions, please contact:
1-844-282-4401
[e-mail]
cubii.com/help

2
BEFORE YOU BEGIN
Safety Instructions
WARNING Consult your physician before starting this or any
exercise program. This is especially important if you have never
exercised before, are pregnant, or suffer from any health problem.
If at any time during exercise, you feel faint, dizzy, or experience
pain, stop and consult your physician.
WARNING Do not use when standing. Only use when sitting.
Failure to follow all warnings and instructions could result in
serious injury or death.
WARNING To reduce the risk of serious injury, read the
following Safety Instructions before using Cubii Go+.
1. Read all warnings and cautions posted on the Cubii Go+ unit.
2. Cubii Go+ should only be used after a thorough review of the
Owner’s Manual.
3. We recommend that two people are available for the unboxing
of this product.
4. Do not allow children to use or play on Cubii Go+. Keep
children and pets away from Cubii Go+.
5. Set up and operate Cubii Go+ on a solid, level surface. Do not
position Cubii Go+ on loose rugs or uneven surfaces.
6. Make sure that adequate space is available for access to and
around Cubii Go+.
7. Before using, inspect Cubii Go+ for worn or loose
components, and securely tighten or replace any worn or
loose components prior to use.
8. Follow your physician’s recommendations in developing your
ownpersonaltnessprogram.

3
I. Before You Begin
9. Alwayschooseaworkoutplanwhichbesttsyourtnessand
ability level. Know your limits and train within them. Always use
common sense when exercising.
10. Do not wear loose or dangling clothing while using Cubii Go+.
11. Be careful to maintain your balance on your chair while using,
mounting, dismounting, or assembling Cubii Go+; loss of
balance may result in a fall and serious bodily injury.
12. Keepbothfeetrmlyandsecurelyonthepedalswhile
exercising.
13. Maximum recommended user weight is 300 pounds (136 kg).
14. Cubii Go+ should be used by only one person at a time.
USE ONLY WHILE SITTING, DO NOT STAND
ON THE UNIT UNDER ANY CIRCUMSTANCE.
Consult Your Physician
It is always important to consult your physician before starting an
exercise program. This is particularly true if any of the following
apply to your current medical condition:
• Chest pain or pain in the neck and/or arm
• Shortness of breath
• A diagnosed heart condition
• Joint and/or bone problems
• Currently taking cardiac and/or blood pressure medications
• Have not previously been physically active
• Dizziness or blurred vision
• Those with physical handicaps
If you feel any of the physical symptoms listed above when you
start your exercise program, contact your physician right away.

4
What’s in the Box
Go+ Main Body
Left Pedal
Right Pedal
Cross Member
Charging Cable
AC Power Adapter
M5 Allen Wrench
GETTING STARTED
Product Size and Weight
The assembled Cubii Go+ measures:
24.7”L x 16.7”W x 8.9”H (62.7cm x 42.4cm x 22.7cm)
The weight of the unit is approximately 20.1 lb (9.1 kg).

5
II. Getting Started
Warning Labels
The warning label is located on your Cubii Go+ product here:
Serial Number Location
The serial number is located on your Cubii Go+ product here:
Record your serial number
here for future reference:
Failure to follow all warnings and instructions could result in serious injury
or death. Before assembling or using this product, read and follow the
Owner’s Manual and all other instructions that accompany this product.
Replace this warning label if damaged, illegible, or removed.
Keep others including children and pets away from equipment.
Consult your physician before starting this or any exercise program. This is
especially important if you are over the age of 35 or have any preexisting
health condition. Always make sure all nuts and bolts are securely
tightened before using this product. The maximum weight that can be
applied is 300 lb or 136 kg.
DO NOT USE WHILE STANDING. USE ONLY WHEN SITTING.
STANDING ON THE UNIT MAY CAUSE SERIOUS INJURY.
WARNING
Product Label

6
Assembling Your Unit
Follow the steps below to assemble your Cubii Go+ compact
seated elliptical.
Step 1 — Crossbar
Before installing the crossbar,
orient the roller wheels to
point away from the body of
the unit, and with the screw
holes facing up. Lower the unit
onto the crossbar so that the
holes line up with the screws.
Tighten screws with the
included wrench, taking care
not to scratch your Cubii Go+.

7
III. Assembling Your Unit
Step 2 — Align Pedal
Align the right pedal tube with the tube shaft on the ring of the
elliptical. Insert the pedal tube into the tube shaft and push in
until the unit stops.

8
III. Assembling Your Unit
Step 3 — Press and
Insert Pedals
Align the pedal wheel with
the wheel track on the
bottom side of the elliptical.
Once aligned, push the
button on the pedal tube
and continue pushing in the
pedal into the tube shaft.

9
III. Assembling Your Unit
Step 4 — Click and Lock
Continue pushing in the pedal
into the tube shaft and wheel
track until you hear a click or the
pedal is pushed in all the way.
To ensure your pedal is locked
into place, release the button
once the pedal is pushed in all
the way and try to pull the pedal
outwards. Your pedal should be
locked into place.
Step 5 — Repeat
Repeat steps 2-4 with the left pedal, then get moving!

10
USING YOUR CUBII GO+
Make sure to have followed all of the assembly steps in the Quick
Start guide before you begin using Cubii Go+.
Handle
Release
Button
Transporting
The Cubii Go+ features an extendable handle and roller wheels
whichallowtheunittoberolledacrosstheoor,muchlikea
rolling suitcase. To do this, follow these steps:
1. Extend the handle by holding down the handle release button,
then pull the handle out fully, about 8” (20cm).
2. Lift the handle to angle the unit and roll it to the desired
position.
3. To collapse the handle, press the handle release button and
slowly return the handle to the desired position. (Once you
have started collapsing the handle, you can stop pressing the
button.)
4. Lower Cubii Go+ to the ground in the desired position.
The unit can also be stood on end and lifted up to carry like a
briefcase.

11
IV. Using Your Cubii Go+
Positioning
The Cubii Go+ can be used either in an upright position, such as
withanofcechair,orinamorereclinedposition,suchaswhen
placed in front of a sofa.
• CubiiGo+occupiesaoorareaof24.7”x16.7”(0.63mx
0.42m). Please leave a clear zone behind the training area
that is at least 24” (0.6m). This zone must be clear of any
obstruction and provide the user a clear exit path.
• Findtheseatcongurationthatsuitsyoumost.Ifyoufeelthere
is not enough room between your knees and the desk, push
your Cubii Go+ away from you and lower the chair height.
Keep your back straight, and do not slouch.
• Ifyouaresittingonanofcechairwithwheels,usethe 
wheel cup.

12
IV. Using Your Cubii Go+
Adjusting the Resistance
Cubii Go+ has 10 resistance levels. Adjust
your workout intensity by turning the
resistance control knob. Level 1 is the
lowest intensity and level 8 is the highest.
We recommend you begin at Level 1 and
increase the intensity gradually over time.
Wheel Cup
Using the Chair Wheel Cup
If you’re using Cubii Go+ while sitting in a chair with wheels or
castors, follow the steps below:
Extend the handle by at least 1 position to expose the wheel cup.
To do this, press and hold down the Handle Release Button while
pulling out the handle, about 2.2” (56mm). If you wish to use the
Go+ in a more reclined position, you may extend the handle to
the 2nd stop. Roll the wheel from your chair into the wheel cup.

13
Step 3 – Check Display for
Charging Symbol
Ensure charging cable is plugged
in to your Cubii elliptical and
cable is secure. Screen should
be powered and lightning bolt
symbolashingtodesignate
charge in progress. The lightning
bolt symbol will remain solid
when it is fully charged.
CHARGING YOUR CUBII ELLIPTICAL
Step 1 — Connect Wall Adapter
Connect charging cable to wall adapter
and ensure wall adapter is plugged
into power source.
IV. Using Your Cubii Go+
Step 2 – Locate Charging Socket
Locate the charging port on your Cubii elliptical and plug in the cable.

14
IV. Using Your Cubii Go+
Battery Life and Power
The screen on your Go+ comes equipped with a rechargeable
lithium-ion battery. With normal use, your Cubii elliptical should
last about 30 days before you need to charge again. Charging
your Go+ completely can take up to 6 hours. You can check the
battery level in the Cubii app or on the built-in screen.
READING THE DISPLAY
CONSOLE
User Options
Your Cubii Go+ elliptical
can store data separately for
User 1, User 2, and Guest.
Press the User button to
switch Users. The triangle
indicates the selected User.
You can also track each
User’s progress through the
Cubii app.
Top Row
The top row displays your
total number of strides. A
“stride” is the equivalent
of one full rotation of the
pedaling motion.
*The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Fitness Cubed
Inc is under license. Other trademarks and trade
names are those of their respective owners.

15
IV. Using Your Cubii Go+
which view is selected.
BLUETOOTH® Wireless
Technology Indicator
TheBluetooth®symbolwillashwhen
your Go+ is available to connect to
your mobile device or tablet. The
Bluetooth® symbol will remain solid
once your elliptical is connected to
the Cubii mobile app. Your elliptical
must be charged in order to pair with
another device.
Battery Indicator
The number of bars in the battery
symbol indicates the charge left in
the battery. When the battery symbol
reaches0bars,itwillashfor20
seconds, indicating that it requires
charging.Thebatterysymbolwillash
during charging when battery level is
Bottom Row
The bottom row displays the following metrics:
• Time (00:00:00-99:59:59 hour:min:sec) elapsed during active
workout
• Distance (000.00-999.99 mi or km) pedaled during a workout
• Calories (000.00-999.99 kcal) during a workout
• RPM - (0-999 strides/min) rotations per minute during a
workout
Press the MODE button to switch which metric is displayed. You
can use the SCAN mode to automatically toggle between the
above metrics every 7 seconds. The triangle indicator shows

16
IV. Using Your Cubii Go+
below 100%. It will remain solid when charging is complete, but
still plugged in. The symbol will disappear when your elliptical is
not charging.
“Smart Reset”
All metrics are additive and counted throughout the day. Once
you have paired the mobile app with your Cubii, then the metrics
displayed on the console will automatically reset each evening at
midnight (as long as your Cubii battery does not deplete). If you
have not paired the mobile app with your Cubii, then the data
will continue to aggregate unless you manually reset the data
or manually setup the “smart reset” feature (see section below
entitled Manually Set a “Smart Reset”).
Console Prole Reset
User1andUser2prolescanberesetfromtheconsole.Simply
selecttherelevantuserprolethenholdtheUserbuttonfor3
secondsthenreleasethebuttontocompletetheprolereset.
Resettingtheuserprolefromthebuilt-inconsoleerasesanydata
storedforthatproleandalsodelinkstheprolefromtheapp.
Theprolecanbeeasilyre-establishedintheappifneeded.
Manual Data Reset
Manuallyresetdataforanyproleontheconsole(User1,User
2orGuest)byselectingtherelevantprole(seeUserButton
section above) and then holding the Mode button for 3 seconds
thenreleasethebuttontocompletetheprolereset.Thisaction
resetsanydatadisplayedonthescreenfortheselectedprole.
Distance Metric Toggle
To switch from miles to kilometers (or kilometers to miles), use
the MODE button to select the Distance metric. Then, hold the
MODE button for 6 seconds. If you are using the Cubii app, this
updatewillalsobereectedthere.