Cubii JR2 User manual

ADJUSTING THE RESISTANCE
Cubii JR2 comes with 8 resistance levels,
adjust your workout intensity by turning
the resistance control knob. Level 1 is the
lowest intensity and level 8 is the highest.
We recommend you begin at Level 1
and increase the intensity gradually over time.
GETTING YOUR GROOVE
You can use your Cubii JR2 in short intervals throughout the day, or you
can use it for long periods of time. We recommend that you begin with
a ve minute session, see how your body feels afterwards, and increase
your session length gradually over time. You can also go forwards or
backwards on the Cubii JR2 to work different muscle groups.
DOWNLOAD THE CUBII APP
Available for free where you download
mobile applications.
• Personalize your prole and workout goals
• Track activity and see your progress
• Socialize in our one-of-a-kind Cubii CommunitiiTM
• Create or participate in group leaderboards
• And much more!
CONTACT
1-844-282-4401
cubii.com/help
[e-mail]
® Trademark of Fitness Cubed Inc. Registered in the US.
Quick Start Guide
TRACKING YOUR WORKOUT
You can track your workout using the LCD screen.
It tracks the below stats:
1. Stride (0-9999)
2. Calorie (0-999.9 kcal)
3. Distance (0-999.9 mi or km)
4. Time (0:00-99:59 hour:min)
5. RPM (0-999 strides/min)
DISPLAY MONITOR SETTINGS
•Press the silver button to switch between stats.
•Select scan to alternate automatically.
•Screen turns on when the silver button is pressed or
when you start pedaling.
•Screen turns off after 4 minutes of inactivity.
•To reset stats, press and hold the silver button until all segments
turn black (about 3 seconds), then let go. Replacing the battery will
also reset the stats. When the stats reach maximum values, they will
reset to zero.
•To switch from Miles (M) to Kilometers (K), press and hold the
silver button for at least 6 seconds. All segments will turn black twice
during this time. After the second ash of black segments, release
the button. When displaying distance, you will see the M is now
showing a K, or vice versa.
Final detailed product manual, assembly demo, and
warranty details at cubii.com/help
Using Your Cubii JR2
Follow the guidelines below to enhance your experience
Please Note: Cubii JR2 is only to be used while sitting. Do not stand on the unit.
Consult your physician before starting this or any exercise program.
v5

WHEEL CUP STOPPER
SCREWS (X4)
SCREWDRIVER
Remove all of the components from the Cubii JR2 box.
Included you should nd:
A
B
C
D
CUBII JR2 UNIT BODY
LEFT AND RIGHT PEDALS
A
C
D
E
E
Assembly Guide
Cubii JR2 Compact Elliptical
Wheel Stopper
Anchor Hole
Find the seat conguration that suits you most. If you feel there is not
enough room between your knees and the desk, push your Cubii JR2
away from you and lower the chair height.
SECURING YOUR CHAIR
If you’re using Cubii JR2 while sitting in a chair with wheels or casters,
follow the steps below:
1. Find the Wheel Stopper that is included with your JR2.
2. Lift up the back of your Cubii JR2 and place the interfacing portion
of the wheel stopper under the base plate. The nub goes through
the anchor hole.
3. Roll one wheel from your chair onto the circle of the stopper until it
is snug in place.
4. If you feel you are too close to your Cubii, the Wheel Stopper can be
detached from the base plate and positioned in the location that is
best for your needs.
Find Your Comfort Zone
B
STEP 1 — ALIGN
Align the right pedal with the right arm.
Insert the bottom of the pedal into the two small holes.
STEP 2 — FLIP
For maximum support, make sure you ip the pedal you are
assembling so it is at the bottom and close to the base.
STEP 3 — SCREW
With a screwdriver, screw in the pedal until tight.
Make sure it does not wobble.
STEP 4 — REPEAT
Repeat steps 1-3 with the left pedal.