Cubii JR2+ User manual

READING THE DISPLAY CONSOLE
ADJUSTING THE RESISTANCE
Cubii JR2+ comes with 8 resistance levels,
adjust your workout intensity by turning
the resistance control knob. Level 1 is the
lowest intensity and level 8 is the highest. We
recommend you begin at Level 1 and increase
the intensity gradually over time.
CONTACT
1-844-282-4401
cubii.com/help
[e-mail]
Quick Start Guide
Using Your Cubii JR2+
Follow the guidelines below to enhance your experience.
Please Note: Cubii JR2+ is only to be used while sitting. Do not stand on the unit.
v8
GETTING YOUR GROOVE
You can use your Cubii JR2+ in short intervals throughout the day or
for long periods of time. We recommend you begin with a ve minute
session, see how your body feels afterwards, and increase your session
length gradually over time. You can also go forwards or backwards on the
Cubii JR2+ to work different muscle groups.
CARRYING AND STORING YOUR JR2+
1. To store Cubii, simply keep it in a clean dry place.
2. Cubii JR2+ is approximately 20.7” x 17.8” x 8.8”
3. Hold the handle to move Cubii. For additional support, place your
other hand under the base. Do not use the pedal arms to move Cubii.
Ask a friend, family member or colleague for help if you nd it heavy.
User Options
Press the USER button to switch
between User 1, User 2, and Guest.
Current selection indicated by triangle.
Top Row
The top row displays your total number
of strides. A “stride” is the equivalent of
one full rotation of the pedaling motion.
Bottom Row
The bottom row displays the metrics:
TIME elapsed during active workout
DISTANCE (mi or km) pedaled
CALORIES burned
RPM rotations per minute (pedaling speed)
Press the MODE button to switch between metrics. Use the SCAN mode
to automatically toggle between metrics every 7 seconds.
BLUETOOTH® WIRELESS TECHNOLOGY FEATURES
The Bluetooth® symbol ashs when available to connect to a device. The
symbol remains solid when connected to the Cubii app. The elliptical
must be charged to pair with a device.
Battery Indicator
The number of bars in the battery symbol indicates battery charge
remaining. The symbol will ash for 20 seconds when unit requires
recharging. The symbol ashes while charging and remains solid when
charging is complete. The symbol disappears when not plugged in.
Distance Metric Toggle
To switch between miles and kilometers, use the MODE button to select
the DISTANCE metric, then hold the MODE button for 6 seconds.
Manual Data Reset
Manually reset workout data for any prole by selecting the prole, then
hold MODE for 3 seconds. This resets data displayed on the screen for
the selected prole.
See the included Owner’s Manual for more features, such as creating a “Smart Reset” to
automatically reset workout data each night, or for info on unlinking proles from the console.
TM
TM

Remove all of the components from the Cubii JR2+ box.
Included you should nd:
Assembly Guide
Cubii JR2+ Compact Elliptical
Anchor Hole
Wheel Stopper
Find the seat conguration that suits you most. If you feel there is not
enough room between your knees and the desk, push your Cubii JR2+
away from you and lower the chair height.
SECURING YOUR CHAIR
If you’re using Cubii JR2+ while sitting in a chair with wheels or casters,
follow the steps below:
1.Find the Wheel Stopper that is included with your JR2+.
2. Lift up the back of your Cubii JR2+ and place the interfacing portion
of the wheel stopper under the base plate. The nub goes through
the anchor hole.
3. Roll one wheel from your chair onto the circle of the stopper until it is
snug in place.
4. If you feel you are too close to your Cubii, the Wheel Stopper can be
detached from the base plate and positioned in the location that is
best for your needs.
Find Your Comfort ZoneThe Cubii App
STEP 1 — Align
Align the right pedal with
the right arm. Insert the
bottom of the pedal into
the two small holes.
STEP 2 — Flip
For maximum support,
make sure you ip the
pedal you are assembling
so it is at the bottom and
close to the base.
STEP 3 — Screw
With a screwdriver, screw
in the pedal until tight.
Make sure it does not
wobble.
STEP 4 — Repeat
Repeat steps 1-3 with the left pedal.
CHARGING YOUR JR2+
The charge port is located above the
crossbar near the front of the unit. Once
plugged in, the screen will power on and the
lightning bolt symbol will ash to indicate the
unit is charging. The symbol will remain solid
when it is fully charged.
A
B
C
D
CUBII JR2+ UNIT BODY
LEFT AND RIGHT PEDALS
WHEEL CUP STOPPER
SCREWS (X4)
E
F
SCREWDRIVER
CHARGING CABLE
AC POWER ADAPTER
G
A
CD
F
E
B
G
BLUETOOTH®* APP FEATURES
The app supports many features such as:
• Personalize your prole and workout goals
• Track activity and see your progress
• Adjust certain elliptical settings
• Create or participate in group leaderboards
• Chat with friends and socialize in our one-
of-a-kind Cubii Communitii™
• and much more!
Find detailed product manual, assembly instructions, and
warranty details at cubii.com/manuals
INSTALLING THE CUBII APP
The Cubii app is currently available on your app store by searching for
“Cubii”. For more detailed information on downloading, installing, or
using the Cubii app, see the included JR2+ Owner’s Manual.
PAIRING WITH THE CUBII APP
To pair with the Cubii app, please follow these instructions:
1. Start pedaling to trigger the Bluetooth® signal. You’ll see the
Bluetooth® symbol glow and start blinking on the display console.
2. Conrm that you’ve enabled Bluetooth® Wireless Technology in your
device’s settings.
3. The app will detect your Cubii elliptical via Bluetooth® Wireless
Technology. Select your elliptical in the app.
4. Once successfully paired, the Bluetooth® symbol will stop blinking.
5. Select if you would like to become User 1, User 2, or proceed as Guest.
6. Start your workout and enjoy your Cubii experience!
From here on, every time you launch the app, it will search for all Cubii
devices in your vicinity and automatically connect with an elliptical that
it has already paired with. If it does not automatically reconnect, you can
manually reconnect in the app.
*The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Fitness Cubed Inc is under
license. Other trademarks and trade names are those of their respective owners.