Cumberland CCF20 User manual

PNEG-1565
Circulation Fan
Models:
CCF20
3CF20
BSK24
BSK24HD
BSK36
Installation Manual
PNEG-1565
Version: 5.0
Date: 01-31-20

2PNEG-1565 Circulation Fan
All information, illustrations, photos and specifications in this manual are based on the latest
information available at the time of publication. The right is reserved to make changes at any
time without notice.

Table of Contents
PNEG-1565 Circulation Fan 3
Contents
Chapter 1 Safety Information ................................................................................................................................4
Chapter 2 Safety Decals ........................................................................................................................................5
Chapter 3 Installation ............................................................................................................................................6
Fan Hanger Installation ..........................................................................................................................6
Fan Installation Options .........................................................................................................................7
Chapter 4 Parts List ...............................................................................................................................................9
20" Circulation Fan (CCF20) Parts .......................................................................................................10
20" Circulation Fan (3CF20) Parts .......................................................................................................11
24" Circulation Fan (BSK24) Parts .......................................................................................................12
24" HD Circulation Fan (BSK24HD) Parts ...........................................................................................13
36" Circulation Fan (BSK36) Parts .......................................................................................................14
Chapter 5 Warranty ..............................................................................................................................................15

4PNEG-1565 Circulation Fan
1. Safety Information
ELECTRICAL SAFETY
An adequate and safe power supply to the Circulation Fan is essential for
safety. A competent and qualified electrician must undertake all electrical
wiring. All wiring is to be installed according to the National Standards and
Regulations relevant to your Country and Region. Remember, electrical safety is
your responsibility.
CORRECT USE OF YOUR CIRCULATION FAN
Only genuine Cumberland parts are to be used in installation and use of the
Circulation Fan. Use of other non-genuine parts is a misuse of the system and
may lead to dangerous situations imperilling the safety and health of you
and others.
This product is intended for the use in ventilation of poultry buildings only.
Any other use is considered a misuse of the product. This fan is not designed
for use in atmospheres where there is a risk of explosion. Such environments
may include enclosed areas of high dust concentrations, gas vapors and fumes.
Use of the Circulation Fan in such an environments is prohibited. If in doubt,
contact Cumberland or your dealer.
SAFETY GUARDS
The Circulation Fan contains many moving and electrical parts, which will
cause serious injury or death if touched. Guards are placed on the unit for your
protection. Operating the unit at any time with guards removed or incorrectly
fitted is a serious misuse of the fan and endangers safety.
SAFETY IN HANDLING THE CIRCULATION FAN
Components of the Circulation Fan require manual handling and lifting during
assembly and installation. To prevent injury, seek assistance where necessary.
CORRECT INSTALLATION OF 3CF20 CIRCULATION FAN MODEL
Rotating blade must be installed a “MINIMUM” of 7' above floor or working level
on fan model 3CF20. The fan model CCF20 can be installed at any height above
floor or working level.

PNEG-1565 Circulation Fan 5
2. Safety Decals
DC-1540
DC-2187
Lockout power
before servicing.
HIGH VOLTAGE
Will cause serious
injury or death.
STAY CLEAR OF
ROTATING BLADE
May cause serious injury.
Blade may start
automatically.
Disconnect and
lockout power sources
before servicing.
FLYING OBJECTS
HAZARD
Danger of eye injury.
Wear eye protection.
DANGERDANGER WARNING
WARNING
DC-1540The GSI Group 217-226-4421
WARNING
GSI Group 217-226-4421 DC-2187
ROTATING BLADE
Stay clear.
Rotating blade must be installed a minimum
of 7 feet (2.13 m) above floor or working level.
Rotating blade will cut
and crush, causing
serious injury.
INSTALLATION INSTRUCTIONSINSTALLATION INSTRUCTIONS

6PNEG-1565 Circulation Fan
3. Installation
NOTE: It does not apply to 24" and 36" size Circulation Fans.
NOTE: Locate packing slip and make sure that all listed parts are enclosed. If parts are missing contact
the dealer immediately. Read and understand all instructions in this manual before installing the
fan mounting bracket and fan.
Fan Hanger Installation
1. Slide both hooks (D) between inner ring (C) of guard and motor. (See Figure 3A.)
2. Using two (2) plastic zip ties (E), attach hanger to grill guard. Wrap zip ties around main support
rod of grill, grill ring and hanger. Trim zip ties when attached. (See Figure 3A.)
NOTE: When fan is hung in place, capacitor cover must be oriented on top of motor (B).
(See Figure 3A.)
Figure 3A
Ref # Description
AOvertop Rafter
B Capacitor Cover on Top of Motor
CInner Ring
D Hanger Hook
EZip Ties Attached
Disconnect all electrical power sources before installing the fan mounting
bracket and fan.

3. Installation
PNEG-1565 Circulation Fan 7
Fan Installation Options
NOTE: It does not apply to 24" and 36" size Circulation Fans.
1. Overtop rafter - Install fan, placing fan hanger overtop of rafter. Place fanmount washer on front side
of loop end. Install lag screw/bolt (not included). (See Figure 3A on Page 6.)
Recommended Lag Screw/Bolt
Wood application (lag screw) - Use a minimum diameter of 1/4" with a minimum thread length into
the wood of 2".
Steel application (bolt) - With varying truss designs use a minimum diameter of 1/4" with appropriate
washer and lock nut.
2. Ceiling/underside of rafter - Install fan, placing top of fan hanger flush with bottom side ceiling/rafter.
Place fan mount washer on the underneath side of the top end. Install lag screw/bolt (not included).
(See Figure 3B.)
Recommended Lag Screw/Bolt
Wood application (lag screw) - Use a minimum diameter of 1/4" with a minimum thread length into
the wood of 2".
Steel application (bolt) - With varying truss designs use a minimum diameter of 1/4" with appropriate
washer and lock nut.
Figure 3B
Ref # Description
AUnderside of Rafter/Ceiling

3. Installation
8PNEG-1565 Circulation Fan
Fan Installation Options (Continued)
NOTE: It does not apply to 24" and 36" size Circulation Fans.
3. Open house/angular rafter - Recommended installation on angular rafter (C). NOTE: Fan must be
hung plum (VERTICAL). Using a cut 2 x 4 approximately 4"-5" long screw 2 x 4 (B) into rafter where
fan will be placed. NOTE: 4"-5" Flat side of 2 x 4 must be parallel to the ground floor. Follow Step 2
on Page 7 for placing fan on underside of rafter/2 x 4. (See Figure 3C.)
Figure 3C
Ref # Description
B4"-5" Level 2 x 4
C Angled Rafter

PNEG-1565 Circulation Fan 9
4. Parts List
1. 20" Circulation Fan (CCF20) Parts - (See Page 10.)
2. 20" Circulation Fan (3CF20) Parts - (See Page 11.)
3. 24" Circulation Fan (BSK24) Parts - (See Page 12.)
4. 24" HD Circulation Fan (BSK24HD) Parts - (See Page 13.)
5. 36" Circulation Fan (BSK36) Parts - (See Page 14.)

4. Parts List
10 PNEG-1565 Circulation Fan
20" Circulation Fan (CCF20) Parts
20" Circulation Fan (CCF20) Parts List
Ref # Part # Description Qty
111-0475 Grill, 20" Front White Painted (7' Plus Install) 1
211-0476 Grill, 20" Back White Painted (7' Plus Install) 1
311-0373 Hanger Circulation Fan 20" 1
413-0146R Prop 20" Circulation Fan (2 Blade Prop) 1
515-0134 Motor, 0.10 HP 1725 RPM 60 Hz 1 PH 1
6S-8723 Fender Washer 3/16" x 1" ZN Grade 2 8
7S-7277 Nylock Nut #10-32 ZN Grade 2 4
8S-9405 Washer - Fan Mount 1
9S-9352 Wire Tie Blk 0.300" x 8.0" 2
10 DC-1897 Decal, 2" Diameter Cumberland Logo 1
11 DC-1540 Decal, Danger/Warning, Danger (DC-1224), Warning 1
12 DC-2187 Decal, 20" Fan Mounting Instructions 1
N/S PNEG-1565 Circulation Fan Instruction Manual 1