Curt Manufacturing 4516 User manual

INSTALLATION INSTRUCTION
For Toyota Tundra Ext/Double Cab 99-06
ATTENTION
1.Please read this installation instruction before installing this part.
When install it,please pay attention to protecting your vehicles.
2.When you use it,please check this parts at a fix time-lapse,such as one
month or two month.
PARTS LIST
Page 1 of 2
ITEM NO:4516
No Name Qty
Photo
Name
No
Remarks
Qty
Photo Remarks
FRONT Mount Bracket 2
2
6
flat washer
"T"Bolt
6.5*18*1.2
M6
4
16
16
2M12*50
Hex Bolt
4
Hex Nut
12.5*30*2.5
M12
M12
lateral
symmetry
REAR Mount Bracket
4
Support Bracket
2
lateral
symmetry
lateral
symmetry
M10
4
10.5*26*2.5
M10
4
4
4
Hex Nut M10
4
Hex Bolt M8*30
M12*50
flat washer 8.4*24*1.6
8
M8
4
4
Hex Nut M8

INSTALLATION STEPS
STEP 1:Check the parts in the box carefully if match above list .
STEP 2:Pls prepare the tools for installation,follow as:10-12wrench,14-17 wrench .
STEP 3:Put the mount bracket into the girder of the car,and tighten it with .
STEP 4:Install the Side Bar to the mount bracket,and tighten it with .
STEP 5:Installation is finished.
Page 2 of 2
Installation Diagram
STEP 01 STEP 02
STEP 03 STEP 04