CyberData 10845 User manual

The IP Endpoint Company
Quick Reference 930104C © 2011, CyberData Corporation, ALL RIGHTS RESERVED.
Quick Reference for the 4-Port
PoweredUSB 2.0 Hub with Serial
Ports and External Power Supply
010845
Installation Information
The USB Driver for this Hub is included in the Windows 2000 operating system. For correct initial
enumeration, plug an HID-compliant mouse into the lower USB portion of one port prior to
plugging the hub into the Host PC.
The updated drivers for this Hub and the Operations Guide for the 4-Port PoweredUSB 2.0 Hub
with Serial Ports, which includes information on the Windows XP setup, can be downloaded
from the following Product Support page:
http://www.cyberdata.net/products/retail/pusb/pusb4portrs232hub/index.html
Product Components List
●(1) CyberData 4-Port PoweredUSB 2.0 Hub with Serial Ports
●(1) Hub External Power supply
●(1) Quick Reference for the PoweredUSB 2.0 Hub with External Power Supply and Serial Ports
●(1) Accessory Kit:
• (1) Short USB 2.0 Hi-Speed host cable
• (1) Host USB cable strain relief clamp
Contact CyberData
●4 Port PoweredUSB 2.0 Hub with Serial Ports Product Support URL:
http://www.cyberdata.net/products/retail/pusb/pusb4portrs232hub/index.html
●CyberData Sales URL for cables and connectors:
http://www.cyberdata.net/products/cables/pusbcables/index.html
●Phone: [phone]
●Technical Support
If you need to contact Technical Support, please use our Technical Support Form at the
following website address to expedite any product questions that you may have:
http://www.cyberdata.net/support/contactsupportretail.html
●Corporate Web Site URL: www.cyberdata.net
●Fax: [phone]
●Address: CyberData Corporation, 3 Justin Court, Monterey, CA 93940
●Service, warranty, and Return Materials Authorizations
If you need service or an RMA, please contact technical support for authorization by filling out
the Retail support form at: http://www.cyberdata.net/support/contactsupportretail.html

© 2011, CyberData Corporation, ALL RIGHTS RESERVED. 930104C Quick Reference
USB Host "B" connector and cable strain relief
Component identification: external front and back views
C
B
A
C
B
A
C
B
A
Jumper Table A B C
Com Port A, Pin 1 JP3 12V 5V CD
Com Port A, Pin 9 JP4 12V 5V RI
Com Port B, Pin 1 JP5 12V 5V CD
Com Port B, Pin 9 JP6 12V 5V RI
Jumper Positions
Jumpers 3 and 4 Jumpers 5 and 6 Jumpers 1 and 2
●In GREEN Disabled Mode, when
24V power is applied with no host
plugged in, the Hub Power LED
(BLUE) is on and all four port Power
LEDs turn on. The Host Link
(connection) LED WILL NOT light.
●In GREEN Mode, when 24V power
is applied with no host plugged in,
the Hub Power LED (BLUE) is on,
the 4 port Power LEDs and the Host
Link (connection) LED DO NOT
light.
●Connect a standard USB 2.0 cable
from host PC to Host connector on
back of hub with 24V power
connected and all four top Port
Power LEDs light and turn on green
sequentially and the host
(connection) Link LED connector
turns on green.
●When a peripheral is plugged into
the enumerated hub; into one of the
hub ports; and the peripheral
enumerates in the OS, the Status Led
for that Port will light and turn green
●On a peripheral load error on any
port, the Status LED turns orange
and 5V power to the lower portion of
the connector is turned off until the
hub is restarted.
Port power
(Pwr) and Hub
power LEDs
+24V up to 2.5 Amp load +24V up to
6.5 Amp load USB Host Connector Type B
+12V PoweredUSB Ports +24V
PoweredUSB Port
Link and
Port1
Status
LEDs
Standard USB 2.0 Hi-Speed
Type A Ports
Serial Ports
Cable strain relief
Jumpers