CyberPower PDU15SW8FNET User manual

User Manual
Power
Distribution
Unit

Table of Contents
Model List ...........................................................1
Introduction ........................................................1
Package Contents ....................................................... 1
For 1U Series ........................................................ 1
For 0U Series ........................................................ 2
For 2U Series ........................................................ 3
Safety Precautions ..................................................... 3
Proruct Features ........................................................ 4
1U 15A Series ....................................................... 4
Technical Specifications ....................................... 4
1U 20A Series ....................................................... 5
Technical Specifications ....................................... 5
0U 15A Series ....................................................... 6
Technical Specifications ....................................... 6
0U 20A Series ....................................................... 7
Technical Specifications ....................................... 7
0U 30A Series ....................................................... 8
Technical Specifications ....................................... 8
2U Series .............................................................. 9
Technical Specifications ....................................... 9
Installation Guide................................................10
Horizontal Installation ............................................... 10
For 1U Model ....................................................... 10
For 2U Model ....................................................... 11
Vertical Installation .................................................. 13
For 1U Model....................................................... 13
For 0U Model with Bracket.................................. 13
For 0U Model with Keyhole Mount ..................... 15
Electrical Installation................................................. 15
Network Installation.................................................. 16
Operation............................................................17
Metered Readout ..................................................... 17
Basic Operation.................................................... 17
PDU Status Screen................................................ 17
Current Level................................................ 17
Input Voltage................................................ 17
Power ........................................................... 17
IP Address .................................................... 17
Outlet Control (switched series only) .......... 17
LED Reversal (0U series only)....................... 17
Environmental Monitoring (optional) ...................... 18
LED Indicators........................................................... 18
Device Reset............................................................. 18
Remote Management .............................................. 18
Unattended/Automatic Shutdown........................... 19
Firmware Upgrade...............................................19
Troubleshooting ..................................................20
Frequently Ask Questions (FAQ) ..........................20
Conformance Approvals ......................................20
Customer Service & Warranty .............................21
Product Registration................................................. 21
CyberPower International ........................................ 21
Limited Warranty ..................................................... 21
Appendix A-Hyper Terminal ................................22
Appendix B-Power Device Network Utility...........23
Overview .................................................................. 23
Installation................................................................ 23
Launch Program ....................................................... 24
Getting Started......................................................... 24
Advanced Settings .................................................... 25

1
For more information on CyberPower products, visit www.CPSww.com
1U Switched Series
PDU15SW8FNET
PDU15SWHVIEC8FNET
PDU20SW8FNET
PDU20SWT8FNET
PDU20SWHVIEC8FNET
1U Monitored Series
PDU15M8FNET
PDU15MHVIEC8FNET
PDU20M8FNET
PDU20MT8FNET
PDU20MHVIEC8FNET
0U Switched Series
PDU15SWV16FNET
PDU20SWVT24FNET
PDU20SWVHVT24FNET
PDU30SWVT24FNET
PDU30SWVHVT24FNET
0U Monitored Series
PDU15MV16FNET
PDU20MVT24FNET
PDU20MVHVT24FNET
PDU30MVT24FNET
PDU30MVHVT24FNET
2U Switched Series
PDU30SWT16FNET
PDU30SWHVT16FNET
2U Monitored Series
PDU30MT16FNET
PDU30MHVT16FNET
Package Contents
(For 1U Series)
Model List
Introduction
PDU
6 (M3x6) Cord Retention
Tray Mounting Screws
(Includes two spares)
6 (M5x12) Screws / 6 Washers
(Includes two spares for each)
RJ45/DB9 Serial Port
Connection Cable
Power Cord 10 feet,
IEC-320 C19/ IEC-320 C20
(PDU20SWHVIEC8FNET/
PDU20MHVIEC8FNET Model Only)
Mounting Bracket: 2 short & 2 long
10 (Flat Head M4x8) Bracket Mounting
Screws (Includes two spares)
Power Cord 10 feet,
IEC-320 C13/IEC-320 C14
(PDU15SWHVIEC8FNET/
PDU15MHVIEC8FNET Model Only)
Cord Retention Tray
Cable Ties / Qty. 10 User Manual / Registration Card / CD
Documentation
Registration
Card
CyberPower
Reliability.Quality. Value.
R
User's Manual

2
For more information on CyberPower products, visit www.CPSww.com
Package Contents
(For 0U Series 16 Outlets/24 Outlets)
Introduction
PDU
6 (Flat Head M4x4) Bracket Mounting
Screws (Includes two spares)
Mounting Brackets x 2
2 Keyhole Mounting Pegs
with 4 (M4x5) Screws
(Includes two spares)
6 (M5x12) Screws/6 Washers
(Includes two spares for each)
Cord Retention Tray Mounting
Screws (M3x6)/Qty. 10 for 16
Outlets/Qty. 14 for 24 Outlets
(Includes two spares)
RJ45/DB9 Serial Port
Connection Cable
Cord Retention Trays Qty. 2
(16 Outlets)/Qty. 3 (24 Outlets)
Cable Ties: Qty. 20 (16 Outlets)
Qty. 30 (24 Outlets)
User Manual / Registration Card / CD
Documentation
Registration
Card
CyberPower
Reliability.Quality. Value.
R
User's Manual

3
For more information on CyberPower products, visit www.CPSww.com
Safety Precautions
Read the following before installing or operating the
Power Distribution Units (PDU):
• Use only the supplied hardware to attach the mounting brackets.
• The PDU must be plugged into a three-wire, grounded outlet on a circuit that
is protected by a fuse or circuit breaker. For PDU15xxxxx series, please use
15A circuit protector. For PDU20xxxxx series, please use 20A circuit protector.
For PDU30xxxxx series, please use 30A circuit protector. Connection to any
other type of power outlet may result in a shock hazard.
• Do not use extension cords or adapters with this PDU.
• Never install a PDU, or associated wiring or equipment, during a lightning storm.
• Ensure that the power cord, plug, and socket are in good condition.
Package Contents
(For 2U Series)
Introduction
PDU
Mounting Brackets x 2
RJ45/DB9 Serial Port
Connection Cable
10 (M3x6) Cord Retention Tray
Mounting Screws
(Includes two spares)
Cord Retention Trays x2
10 (Flat Head M4x8) Bracket Mounting
Screws (Includes two spares)
6 (M5x12) Screws / 6 Washers
(Includes two spares for each)
Cable Ties: Qty. 20 User Manual / Registration Card / CD
Documentation
Registration
Card
CyberPower
Reliability.Quality. Value.
R
User's Manual
Check
Before using, please check to ensure the package contains all the
items shown above. If there are missing parts, please contact
your local CyberPower (refer to CyberPower International P.21)
for technical support.
To prevent the risk of fire or electric shock, this PDU should be installed in a
temperature and humidity controlled indoor area free of conductive contaminants. Do
not install this PDU where excessive moisture or heat is present.

4
For more information on CyberPower products, visit www.CPSww.com
Product Features (1U 15A Series)
Front panel description
NEMA Type
IEC Type
Rear panel description
A. Power Cord
B. AC Output Outlets
C. Current Level
D. Input Voltage
E. Power
F. Load Indicator
G. Ethernet Port
H. Tx/Rx Indicator
I. Link Indicator
J. Outlet Indicator
(switched series only)
K. Serial/ ENVIROSENSOR Port
(RJ45 modular port)
L. Select Button
M.PDU Status Screen
N. Reset Button
A
A
Technical Specifications
Switched Series (1U 15A) Monitored Series (1U 15A)
Model Name PDU15SW8FNET PDU15SWHVIEC8FNET PDU15M8FNET PDU15MHVIEC8FNET
Input
Nominal Voltage 100-120V 200-240V 100-120V 200-240V
Frequency 50/60Hz
Derated Input Current 12A 12A(UL)/10A(CE) 12A 12A(UL)/10A(CE)
Plug Type NEMA 5-15P IEC-320 C14 NEMA 5-15P IEC-320 C14
Power Cord Type SR (14 AWG) Socket SR (14 AWG) Socket
Power Cord Length 12 ft/3.65 m 10 ft/3.05 m 12 ft/3.65 m 10 ft/3.05 m
Output
Nominal Voltage 100-120V 200-240V 100-120V 200-240V
Derated Output Current 12A 12A(UL)/10A(CE) 12A 12A(UL)/10A(CE)
Outlet Type NEMA 5-15P IEC-320 C13 NEMA 5-15P IEC-320 C13
Outlet Number 8
Networking
Protocol Support TCP/IP, UDP, DHCP, SNMP, HTTP
Connectivity RJ45
Physical
Dimension (HxWxD) 1.75" x 17.05" x 4.41"/44mm x 433mm x 112mm
Environmental
Humidity 0 to 95% Non-condensing
Altitude 14700 ft/4500 m
Temperature 32oF to 104oF /0oC to 40oC
Safety Approvals
Certifications
UL 60950-1
CSA C22.2
FCC Class A
UL 60950-1
CSA C22.2
CE, FCC Class A
UL 60950-1
CSA C22.2
FCC Class A
UL 60950-1
CSA C22.2
CE, FCC Class A
Warranty
Product Warranty 2 years
A. External Site Ground

5
For more information on CyberPower products, visit www.CPSww.com
Product Features (1U 20A Series)
Front panel description
NEMA Type
IEC Type
Rear panel description
A. Power Cord
B. AC Output Outlets
C. Current Level
D. Input Voltage
E. Power
F. Load Indicator
G. Ethernet Port
H. Tx/Rx Indicator
I. Link Indicator
J. Outlet Indicator
(switched series only)
K. Serial/ ENVIROSENSOR Port
(RJ45 modular port)
L. Select Button
M.PDU Status Screen
N. Reset Button
A. External Site Ground
A
A
Technical Specifications
Switched Series (1U 20A) Monitored Series (1U 20A)
Model Name PDU20SW8FNET PDU20SWHVIEC8FNET PDU20M8FNET PDU20MHVIEC8FNET
PDU20SWT8FNET PDU20MT8FNET
Input
Nominal Voltage 100-120V 200-240V 100-120V 200-240V
Frequency 50/60Hz
Derated Input Current 16A
Plug Type NEMA 5-20P IEC-320 C20 NEMA 5-20P IEC-320 C20
NEMA L5-20P NEMA L5-20P
Power Cord Type SR (12 AWG) Socket SR (12 AWG) Socket
Power Cord Length 12 ft/3.65 m 10 ft/3.05 m 12 ft/3.65 m 10 ft/3.05 m
Output
Nominal Voltage 100-120V 200-240V 100-120V 200-240V
Derated Output Current 16A
Outlet Type NEMA 5-20R IEC-320 C13 NEMA 5-20R IEC-320 C13
Outlet Number 8
Networking
Protocol Support TCP/IP, UDP, DHCP, SNMP, HTTP
Connectivity RJ45
Physical
Dimension (HxWxD) 1.75" x 17.05" x 4.41"/44mm x 433mm x 112mm
Environmental
Humidity 0 to 95% Non-condensing
Altitude 14700 ft/4500 m
Temperature 32oF to 104oF /0oC to 40oC
Safety Approvals
Certifications
UL 60950-1
CSA C22.2
FCC Class A
UL 60950-1
CSA C22.2
CE, FCC Class A
UL 60950-1
CSA C22.2
FCC Class A
UL 60950-1
CSA C22.2
CE, FCC Class A
Warranty
Product Warranty 2 years

6
For more information on CyberPower products, visit www.CPSww.com
A. Power Cord
B. AC Output Outlets
C. Current Level
D. Input Voltage
E. Power
F. Load Indicator
G. Ethernet Port
H. Tx/Rx Indicator
I. Link Indicator
J. Outlet Indicator
(switched series only)
K. Serial /
ENVIROSENSOR Port
(RJ45 modular port)
L. Select Button
M. PDU Status Screen
N. Reset Button
A. Bracket Screw Hole
B. Keyhole Mount Peg
Screw Hole
Technical Specifications
Switched Series (0U 15A) Monitored Series (0U 15A)
Model Name PDU15SWV16FNET PDU15MV16FNET
Input
Nominal Voltage 100-120V
Frequency 50/60Hz
Derated Input Current 12A
Plug Type NEMA 5-15P
Power Cord Type SR (14 AWG)
Power Cord Length 10 ft/3.05 m
Output
Nominal Voltage 100-120V
Derated Output Current 12A
Outlet Type NEMA 5-15R
Outlet Number 16
Networking
Protocol Support TCP/IP, UDP, DHCP, SNMP, HTTP
Connectivity RJ45
Physical
Dimension (HxWxD) 49" x 2.20" x 1.75"/1245mm x 56mm x 44mm
Environmental
Humidity 0 to 95% Non-condensing
Altitude 14700 ft/4500 m
Temperature 32oF to 104oF /0oC to 40oC
Safety Approvals
Certifications UL 60950-1, CSA C22.2, FCC Class A
Warranty
Product Warranty 2 years
Product Features (0U 15A Series)
Front panel description Rear panel description
B
A
A
B

7
For more information on CyberPower products, visit www.CPSww.com
A. Power Cord
B. AC Output Outlets
C. Current Level
D. Input Voltage
E. Power
F. Load Indicator
G. Ethernet Port
H. Tx/Rx Indicator
I. Link Indicator
J. Outlet Indicator
(switched series only)
K. Serial /
ENVIROSENSOR Port
(RJ45 modular port)
L. Select Button
M. PDU Status Screen
N. Reset Button
A. Bracket Screw Hole
B. Keyhole Mount Peg
Screw Hole
Product Features (0U 20A Series)
Front panel description Rear panel description
NEMA Type IEC Type
Technical Specifications
Switched Series (0U 20A) Monitored Series (0U 20A)
Model Name PDU20SWVT24FNET PDU20SWVHVT24FNET PDU20MVT24FNET PDU20MVHVT24FNET
Input
Nominal Voltage 100-120V 200-240V 100-120V 200-240V
Frequency 50/60Hz
Derated Input Current 16A
Plug Type NEMA L5-20P NEMA L6-20P NEMA L5-20P NEMA L6-20P
Power Cord Type SR (12 AWG)
Power Cord Length 10 ft/3.05 m
Output
Nominal Voltage 100-120V 200-240V 100-120V 200-240V
Derated Output Current 16A
Outlet Type NEMA 5-20R IEC-320 C13*21/
IEC-320 C19*3 NEMA 5-20R IEC-320 C13*20/ IEC-320 C19*4
Outlet Number 24 21+3 24 20+4
Networking
Protocol Support TCP/IP, UDP, DHCP, SNMP, HTTP
Connectivity RJ45
Physical
Dimension (HxWxD) 66.53" x 2.20" x 1.75"/1690mm x 56mm x 44mm
Environmental
Humidity 0 to 95% Non-condensing
Altitude 14700 ft/4500 m
Temperature 32oF to 104oF /0oC to 40oC
Safety Approvals
Certifications UL 60950-1, CSA C22.2, FCC Class A
Warranty
Product Warranty 2 years
B
A
B
A

8
For more information on CyberPower products, visit www.CPSww.com
A. Power Cord
B. AC Output Outlets
C. Input Circuit Breaker
D. Current Level
E. Input Voltage
F. Power
G. Load Indicator
H. Ethernet Port
I. Tx/Rx Indicator
J. Link Indicator
K. Outlet Indicator
(switched series only)
L. Serial /
ENVIROSENSOR Port
(RJ45 modular port)
M. Select Button
N. PDU Status Screen
O. Reset Button
A. Bracket Screw Hole
B. Keyhole Mount Peg
Screw Hole
Product Features (0U 30A Series)
Front panel description Rear panel description
NEMA Type IEC Type
B
A
B
A
Technical Specifications
Switched Series (0U 30A) Monitored Series (0U 30A)
Model Name PDU30SWVT24FNET PDU30SWVHVT24FNET PDU30MVT24FNET PDU30MVHVT24FNET
Input
Nominal Voltage 100-120V 200-240V 100-120V 200-240V
Frequency 50/60Hz
Derated Input Current 24A
Plug Type NEMA L5-30P NEMA L5-30P NEMA L5-30P NEMA L5-30P
Power Cord Type SR (10 AWG)
Power Cord Length 10 ft/3.05 m
Output
Nominal Voltage 100-120V 200-240V 100-120V 200-240V
Derated Output Current 24A
Derated Output Current
(each bank) 20A 15A 20A 15A
Bank Number 2
Outlet Type NEMA 5-20R IEC-320 C13*21/
IEC-320 C19*3 NEMA 5-20R IEC-320 C13*20/ IEC-320 C19*4
Outlet Number 24 21+3 24 20+4
Circuit Breaker Yes
Networking
Protocol Support TCP/IP, UDP, DHCP, SNMP, HTTP
Connectivity RJ45
Physical
Dimension (HxWxD) 70" x 2.20" x 1.75"/
1778mm x 56mm x 44mm
66.53" x 2.20" x 1.75"/
1690mm x 56mm x 44mm
Environmental
Humidity 0 to 95% Non-condensing
Altitude 14700 ft/4500 m
Temperature 32oF to 104oF /0oC to 40oC
Safety Approvals
Certifications UL 60950-1, CSA C22.2, FCC Class A
Warranty
Product Warranty 2 years

9
For more information on CyberPower products, visit www.CPSww.com
Technical Specifications
Switched Series (2U) Monitored Series (2U)
Model Name PDU30SWT16FNET PDU30SWHVT16FNET PDU30MT16FNET PDU30MHVT16FNET
Input
Nominal Voltage 100-120V 200-240V 100-120V 200-240V
Frequency 50/60Hz
Derated Input Current 24A
Plug Type NEMA L5-30P NEMA L6-30P NEMA L5-30P NEMA L6-30P
Power Cord Type SR (10 AWG)
Power Cord Length 10 ft/3.05 m 12 ft/3.65 m
Output
Nominal Voltage 100-120V 200-240V 100-120V 200-240V
Derated Output Current 24A
Derated Output Current
(each bank) 20A 15A 20A 15A
Bank Number 2
Outlet Type NEMA 5-20R IEC-320 C13 NEMA 5-20R IEC-320 C13*12/
IEC-320 C19*4
Outlet Number 16
Circuit Breaker Yes
Networking
Protocol Support TCP/IP, UDP, DHCP, SNMP, HTTP
Connectivity RJ45
Physical
Dimension (HxWxD) 3.5" x 17.05" x 4.41"/88mm x 433mm x 112mm
Environmental
Humidity 0 to 95% Non-condensing
Altitude 14700 ft/4500 m
Temperature 32oF to 104oF /0oC to 40oC
Safety Approvals
Certifications UL 60950-1, CSA C22.2, FCC Class A
Warranty
Product Warranty 2 years
Product Features (2U Series)
Front panel description
NEMA Type
IEC Type
A. Power Cord
B. AC Output Outlets
C. Input Circuit Breaker
D. Current Level
E. Input Voltage
F. Power
G. Load Indicator
H. Ethernet Port
I. Tx/Rx Indicator
J. Link Indicator
K. Outlet Indicator
(switched series only)
L. Serial/ ENVIROSENSOR Port
(RJ45 modular port)
M.Select Button
N. PDU Status Screen
O. Reset Button
Rear panel description
A. External Site Ground
Bank 1 , 20A
Bank 2 , 20A
2
1345678
16
15
14
13
12
11
10
9
Tx/Rx
Link
Amps
Volts
KW
- Warning
- Overload
B1 B2 - Normal
Select
YU0-0000028-00
Reset
100-120VAC
50/60 Hz
24A MAX
B
K
A
G H
C
I
J
LNFD
MOE
Bank 1 , 15A
Bank 2 , 15A
200-240VAC
50/60 Hz
24A MAX
12A MAX PER OUTLET
2
1345678
16
15
14
13
12
11
10
9
Tx/Rx
Link
Amps
Volts
KW
- Warning
- Overload
B1 B2 -Normal
Select
YU0-0000028-00
Reset
B
K
A
G H
C
I
J
LN
FD
MO
E
A

10
For more information on CyberPower products, visit www.CPSww.com
Installation Guide
Please use only the provided screws through the entire
installation process.
Horizontal Installation
For 1U Model
Step 1. Mounting Bracket Installation
Use the provided Mounting Bracket Screws (8) to attach the SHORT
Mounting Brackets (2) to the PDU.
Step 2. PDU Mounting
Use the supplied Washers (4) and Screws (4) to secure the PDU to your
existing rack system.
If you plan on attaching the Cord Retention Tray to the PDU, you will need
to use the LONG Mounting Brackets (2).

11
For more information on CyberPower products, visit www.CPSww.com
Installation Guide
For 2U Model
Step 1. Mounting Bracket Installation
Use the provided Mounting Bracket Screws (8) to attach the Mounting
Brackets (2) to the PDU.
Step 3. Cord Retention Tray Installation (optional)
Attach the Cord Retention Tray to the PDU with the 4 supplied Cord
Retention Tray Mounting Screws.
Use the provided Cable Ties to fasten each cord to the Cord Retention Tray.

12
For more information on CyberPower products, visit www.CPSww.com
Use the provided Cable Ties to fasten each cord to the Cord Retention Tray.
Step 2. PDU Mounting
Use the supplied Washers (4) and Screws (4) to secure the PDU to
your existing rack system
Step 3. Cord Retention Tray Installation (optional)
Attach the Cord Retention Tray to the PDU with the 8 supplied Cord
Retention Tray Mounting Screws.
Installation Guide

13
For more information on CyberPower products, visit www.CPSww.com
Use the provided Cable Ties to fasten each cord to the Cord Retention Tray.
Step 1. Mounting Bracket Installation
Use the provided Mounting Bracket Screws (8) to attach the SHORT
Mounting Brackets (2) to the PDU.
Step 2. PDU Mounting
Use the supplied Washers (2) and Screws (2) to secure the PDU to your
existing rack system.
Installation Guide
Vertical Installation
For 1U Model
For 0U Model with Bracket
Step 1. Mounting Bracket Installation
Use the provided Mounting Bracket Screws (4) to attach the
Mounting Brackets (2) to the PDU.

14
For more information on CyberPower products, visit www.CPSww.com
Step 2. PDU Mounting
Use the supplied Washers (2) and Screws (2) to secure the PDU
to your existing rack system.
Step 3. Cord Retention Tray Installation (optional)
Attach the Cord Retention Tray to the PDU with the supplied
Cord Retention Tray Mounting Screws.
Use the provided Cable Ties to fasten each cord to the Cord Retention Tray.
Installation Guide

15
For more information on CyberPower products, visit www.CPSww.com
Use the provided Cable Ties to fasten each cord to the Cord Retention Tray.
Installation Guide
For 0U Model with Keyhole Mount
Step 1. Keyhole Mount Installation
Use the provided Screws (2) to attach the Keyhole Mounting Pegs (2) to
the PDU.
Step 2. PDU Mounting
Align the Keyhole Mounts to the Keyhole Slots on the rack. Insert and slide
down to lock firmly into the place.
Step 1 – Receptacle evaluation
Ensure that the plug type of your PDU unit matches the wall receptacle
type that you are using.
Step 2 – Plug the PDU into the wall receptacle
The PDU must be plugged into a three-wire, grounded wall
receptacle only. The wall receptacle must also be connected to
an appropriate branch circuit/main with fuse or circuit breaker
protection. Connection to any other type of wall receptacle may
result in a shock hazard.
Electrical Installation

16
For more information on CyberPower products, visit www.CPSww.com
Installation Guide
Step 3 – Attach equipment
It is extremely important not to exceed the PDUs maximum current
load (as outlined in the Specifications section). In order to determine
your total load, simply use the Metered Readout on the front of the PDU.
Step 1 – Attach the LAN Cable
Using a CAT5 RJ45 cable, attach one end to the Ethernet port on the front
of the PDU, and the other end to a network port.
Step 2 – Establish the PDU IP address
Assigning an IP address to the CyberPower PDU requires the user to have
an available IP address that is valid on the respective network.
If an available IP address is unknown, contact the network administrator to
obtain one.
The default IP is 192.168.20.177 and the default DHCP function is on.
There are multiple methods for setting up the IP address on the PDU. Please follow
the instructions below for the method that is appropriate for your application.
Please make sure the PDU is powered on during this process.
Option 1 (recommended): Power Device Network Utility
1. Use the included “PDU Software Installation CD” to install the Power Device
Network Utility program.
2. Open the Power Device Network Utility software (Start => Power Device
Network Utility).
3. Highlight the PDU device from the list and select Edit and Setup device =>
Assisted Setup from the menu.
4. Configure the IP Address, Subnet Mask, and Gateway Address to match your
network settings.
5. Enter the user name and password of the PDU device at the Authentication menu.
Note : The default username is “cyber” and the default password is “cyber”.
For further information and installation instructions, see Appendix B.
Option 2: DHCP Server
1. Ask your administrator if there is DHCP server on the LAN.
2. Make sure the DHCP is Enabled.
3. Make sure the network connection is ready and power on the PDU.
4. The PDU will obtain an IP address from the DHCP server automatically.
Option 3: Address Resolution Protocol (ARP) Command
1. Obtain the MAC address from the sticker on the PDU.
2. Open a command prompt as an administrator and type the following:
“arp -s [available IP address] [MAC address of PDU]”.
Example: arp -s 192.168.20.240 00-0c-15-80-00-01
IP Address MAC Address
3. Use the Ping command to assign a size of 123 bytes to the IP.
* Type in “ping 192.168.20.240 -l 123” then press Enter
* If the replies are received, your computer can communicate with the IP address
Option 4: Hyper Terminal or Terminal Emulator
In order for Hyper Terminal to interface with the PDU, the PC/server must be
connected directly to the PDU via the serial port.
1. Use the included RJ45/DB9 serial port connection cable, attach one end to the
serial port on the front of the PDU, and the other end to the PC/ server.
2. Open the Hyper Terminal software on your PC and select a name and icon for the
connection.
3. Setup the COM port settings using the following values
* Bits per second: 9600
* Data bits: 8
* Parity: None
* Stop bits: 1
* Flow control: None
Network Installation

17
For more information on CyberPower products, visit www.CPSww.com
Installation Guide
Operation
4. Type “setup” and press Enter to enter the Authentication menu.
5. Enter the user name and password of the PDU device at the Authentication menu.
Note: The default username is “cyber” and the default password is “cyber”.
For further information and configuration via Hyper Terminal, see Appendix
A-Hyper Terminal.
Metered Readout
Tx/Rx
Link
Amps
Volts
KW
- Warning
- Overload
B1 B2 - Normal
Select
YU0-0000028-00
Reset
The Metered Readout provides instant status updates of
the PDU’s Voltage, Current, Power conditions as well as
the local IP address of the unit to the user. In addition, it
also allows the user to control each outlet of the PDU.
Basic Operation
Screen Selection- To toggle the different status screens, press the Select button
next to the PDU status screen.
• Pressing the Select button once will toggle to the next status screen.
• Pressing and holding the Select button for 3 seconds will display the local IP
address of the unit.
• Pressing and holding the Select button for 6 seconds will enter the outlet
control mode.
PDU Status Screen
•CurrentLevel
The Current Level screen shows the total current draw of
the connected equipment. Units are listed in Amps.
•InputVoltage
The Input Voltage screen measures the AC voltage that the
system is receiving from the utility wall receptacle. This
can be used as a diagnostic tool to identify poor-quality
input power. Units are listed in Volts.
•Power
The Power screen shows the total power that the devices
connected to the PDU consumes. Units are listed in kilowatts.
•IPAddress
The IP Address screen displays the local IP address of the
PDU unit. Note: If the PDU is not connected to a LAN, the
readout will display the default IP address.
•OutletControl(switchedseriesonly)
The Outlet screen shows the condition of each outlet in
sequence. When the outlet is on, the light below this
outlet will be on and a square appears in the upper right
area next to the number of the outlet. To switch the outlet
off, press the Select button once and the square will move
to the lower right. After 1 second, the outlet will turn off.
•LEDReversal(0Useriesonly)
The LED status screen can be set to display upside down from standard through
the Web Interface (as shown in figures below). Note: the decimal point will not
be moved and will instead be on the top if this option is enabled.
Select
KW
Volts
Amps
Tx/Rx
Link
Reset
B1 B2
-Normal -Warning -Overload
PDU20SWVT24FNET
Select
KW
Volts
Amps
Tx/Rx
Link
Reset
B1 B2
-Normal -Warning
-Overload
PDU20SWVT24FNET
KW
Volts
Amps
Reset
B1
KW
Volts
Amps
Reset
B1

18
For more information on CyberPower products, visit www.CPSww.com
Operation
Environmental Monitoring (optional)
CyberPower PDUs along with the environment sensor (ENVIROSENSOR) provide
the function of temperature and humidity monitoring in a server closet and/
or datacenter remotely. To connect the PDU with ENVIROSENSOR, use the RJ45
Ethernet Cable. Plug one end into the Serial/ENVIROSENSOR port on the PDU
and the other end into the RJ45 port on the ENVIROSENSOR (as shown in figures
below). When the PDU correctly connects to the ENVIROSENSOR, users can see
the temperature and humidity data on the Web Interface. For further information
regarding ENVIROSENSOR configuration please refer to the PDU Software
Installation CD.
Device Reset
• To reset all the settings to default except for the IP address, press and hold
the Reset Button for 3 seconds.
• To reset all the settings to default, press and hold the Reset Button for 6 seconds.
Remote Management
The remote management function of the CyberPower PDU provides for
monitoring the PDU vitals, controlling outlets, and utilizing SNMP functionality.
Remote management is performed via the web interface. To access the web
interface, please follow the instructions below:
1. Enter the IP address of the PDU into a web browser (Internet Explorer, Firefox).
2. Enter the user name and password of the PDU device at the authentication screen.
Note: The default username is ”cyber” and the default password is “cyber”.
For additional information about the features and functionality of CyberPower
Management Console, please refer to the PDU Software Installation CD.
8
Select
KW
Volts
Amps
- Normal
- Warning
- Overload
Tx/Rx
Link
Reset
YU0-0000033-01
PDU20SWT8FNET
Select
- Normal
- Warning
- Overload
Tx/Rx
Link
PDU20SWT8FNET
LED Indicators
Indicator Status Description
Load
Green The total PDU power load is normal.
Orange Near overload.
Red Overload.
Tx/Rx
Off The PDU power is off.
On(Green) The PDU power is on.
Flash Receiving/transmitting data packet.
Reset finished.
LINK On Indicates the PDU is connected to the LAN.
Off Indicates the PDU is not connected to the LAN.
Outlet On The outlet is on and providing power.
Off The outlet is off.