CyberPower PDU81001 User manual

Power Distribution Unit
USER'S MANUAL
Copyright © 2018 Cyber Power Systems, Inc. All rights reserved. K01-0000545-02

Table of Contents
Model List .................................................................1
Safety Precautions ..................................................1
Introduction .............................................................2
Package Contents ...................................................................2
1 U Models ............................................................................2
2U Models ............................................................................3
0U Models............................................................................4
Product Features.....................................................................5
1U 15A Models ....................................................................5
Technical Specifications ................................................5
1U 20A Models...................................................................6
Technical Specifications ................................................6
2U Models............................................................................7
Technical Specifications ................................................7
0U 16/20A Models ...........................................................8
Technical Specifications ................................................9
0U 30/32A Models ..........................................................10
Technical Specifications ................................................ 11
Installation Guide ....................................................12
Horizontal Installation...........................................................12
For 1U Models ....................................................................12
For 2U Models ...................................................................13
Vertical Installation ...............................................................15
For 1U Models....................................................................15
For 0U Models...................................................................15
Power Cord Direction Change - For 0U PDU..............19
Locking Power Cord - For IEC Type PDU.....................20
Input Power Cord.............................................................20
Output Power Cord.........................................................20
Electrical Installation.............................................................20
Network Installation..............................................................21
Operation..................................................................22
Remote Management...........................................................22
Local Management................................................................22
LED Indicators........................................................................23
Environmental Monitoring (optional)............................23
Device Reset ...........................................................................23
Unattended/Automatic Shutdown .................................23
Firmware Upgrade...................................................24
Troubleshooting ......................................................28
Conformance Approvals.........................................28
Customer Service & Warranty ...............................29
Product Registration............................................................29
CyberPower International ..................................................29
Limited Warranty...................................................................29
Appendix A-Hyper Terminal ..................................30
Appendix B-Power Device Network Utility .........30
Overview...................................................................................30
Installation................................................................................30
Launch Program ....................................................................32
Getting Started ......................................................................32
Advanced Settings ...............................................................33
Appendix C-PDU Daisy-Chain Function...............34

1
Model List
Switched Metered by Outlet Series
1U 2U 0U
PDU81001 PDU81003 PDU81101
PDU81002 PDU81007 PDU81102
PDU81004 PDU81008 PDU81104
PDU81005 PDU81009 PDU811 05
PDU81006 PDU81404
PDU81405
Metered by Outlet Series
1U 2U
PDU71001 PDU71003
PDU71002 PDU71007
PDU71004 PDU71008
PDU71005 PDU71009
PDU71006
Switched Series
1U 2U 0U
PDU41001 PDU41003 PDU41101
PDU41002 PDU41007 PDU41102
PDU41004 PDU41008 PDU41104
PDU41005 PDU41009 PDU41105
PDU41006 PDU41404
PDU41405
Monitored Series
1U 2U 0U
PDU31001 PDU31003 PDU31101
PDU31002 PDU31007 PDU31102
PDU31004 PDU31008 PDU31106
PDU31005 PDU31009 PDU31114
PDU31006 PDU31406
PDU31414
Safety Precautions
Read the following before installing or operating the Power
Distribution Units (PDU):
• Use only the supplied hardware to attach the mounting brackets.
• The PDU must be plugged into a three-wire, grounded outlet
on a circuit that is protected by a fuse or circuit breaker. For
15A PDU series, please use a 15A circuit protector. For 20A PDU
series, please use a 20A circuit protector. For 30A PDU series,
please use a 30A circuit protector. Connection to any other
type of power outlet may result in a shock hazard.
• Do not use extension cords or adapters with this PDU.
• Never install a PDU or associated wiring or equipment during a
lightning storm.
• Ensure that the power cord, plug, and socket are in good
condition.
To prevent the risk of fire or electrocution, this PDU should be installed
in a temperature and humidity controlled indoor area free of conductive
contaminants. Do not install this PDU where excessive moisture or heat
is present.

2
Package Contents
1U Models
Introduction
PDU Mounting Brackets:
2 short & 2 long
12 (Flat Head M4 x 8)
Bracket Mounting Screws
6 (M5 x 12) Rack Mounting
Screws/Washers
Cord Retention Tray 6 (M3 x 6)
Cord Retention Tray
Mounting Screws
Cable Ties:
Qty: 12 (NEMA outlet PDU)
Qty: 27 (IEC outlet PDU)
RJ45/DB9 Serial Port
Connection Cable
User's Manual, Registration Card, and Software Download Card
U
s
e
rs
M
a
nu
a
l
Registration
Card
PowerPanel
Management Software

3
Package Contents
2U Models
PDU Mounting Brackets x 2
12 (Flat Head M4 x 8)
Bracket Mounting Screws
6 (M5 x 12) Rack Mounting
Screws/Washers
Cord Retention Tray x 2 12 (M3 x 6)
Cord Retention Tray
Mounting Screws
Cable Ties:
Qty: 24 (NEMA outlet PDU)
Qty: 30 (10 IEC outlet PDU)
Qty: 48 (16 IEC outlet PDU)
RJ45/DB9 Serial Port
Connection Cable
User's Manual, Registration Card, and Software Download Card
U
s
e
rs
M
a
nu
a
l
Registration
Card
PowerPanel
Management Software
Introduction

4
The items below are only included with certain models
Power Cord 10ft IEC 320 C13/14
(PDU81004/ PDU71004/
PDU41004/ PDU31004)
Power Cord 10ft IEC 320 C19/20
(PDU81005/ PDU71005/
PDU41005/ PDU31005)
Adapter NEMA L5-20R to 5-20P
(PDU81002/ PDU81101/
PDU71002/ PDU41002/
PDU41101/ PDU31002/
PDU31101)
Power Cord 10ft
IEC 320 C19 to NEMA L6-20P
(PDU81006/ PDU81104/
PDU71006/ PDU41006/
PDU41104/ PDU31006/
PDU31114)
Package Contents
0U Models
PDU Mounting Brackets
with 6 (M4x5) Screws
6 (M5 x 12) Rack Mounting
Screws/Washers
Cord Retention Tray
6 (M3 x 6)
Cord Retention Tray
Mounting Screws
Cable Ties:
Qty. 30 (20 outlet PDU)
Qty. 36 (24 outlet PDU)
Qty. 63 (42 outlet PDU)
RJ45/DB9 Serial Port
Connection Cable
User's Manual, Registration Card,
and Software Download Card
U
s
e
rs
M
a
nu
a
l
Registration
Card
PowerPanel
Management Software
Introduction
Check
Before using, please check to ensure the package contains all the
items shown above. If there are missing parts, please contact your local
CyberPower technical support team for assistance.

5
Product Features (1U 15A Models)
Front Panel Description
NEMA Type
IEC Type
Rear Panel Description
Technical Specifications
Model Name
PDU81001
PDU71001
PDU41001
PDU31001
PDU81004
PDU71004
PDU41004
PDU31004
Input
Nominal Voltage 100-120V 100-240V
Frequency 50/60Hz
Maximum Input Current 12A UL (Derated) 10A CE/ 12A UL (Derated)
Plug Type NEMA 5-15P IEC 320 C14
Power Cord Type SR (14 AWG) Socket
Power Cord Length 12 ft/3.65 m 10 ft/3.05 m
Output
Nominal Voltage 100-120V 100-240V
Maximum Output Current 12A UL (Derated) 10A CE/ 12A UL (Derated)
Outlet Type NEMA 5-15R IEC 320 C13
Outlet Number 8
Management and Communications
Multifunction LCD Readout Voltage, Frequency, Load, Current, HW/FW Version, Network Information
Software PowerPanel® Business Edition
Networking Yes
Serial Port RJ45
Sensor Capable Optional
Physical
Dimensions (H x W x D) 1.75" x 17.05" x 4.41"/ 44mm x 433mm x 112mm
Environmental
Humidity 0 to 95% Non-condensing
Altitude 11480 ft/3500 m
Temperature 32oF to 131oF / 0oC to 55oC
Safety Approvals
Certifications UL 60950-1, FCC Class A UL 60950-1, CE, FCC Class A
* All specifications are subject to change without notice.
A. AC Inlet/ AC Power Cord - Used to connect PDU to utility
power or UPS.
B. AC Output Receptacles - Provides power for connected
equipment.
C. Status Indicator - Indicates the condition of the PDU (eg.
load or environment status).
D. Multifunction LCD Readout - Displays various PDU
information such as power and load condition.
E. Ethernet Port – Used to connect PDU to the network.
F. ENVIROSENSOR/ Daisy Chain (In) Port (RJ45 modular port)
– Used for ENVIROSENSOR or chaining to previous PDU.
G. USB Port - Used to upgrade the firmware via a flash drive.
H. Serial Port (RJ45 modular port) - Used to connect to a PC
and control the PDU locally via SSH/Telnet.
I. Daisy Chain (Out) Port – Used for chaining to next PDU.
J. Select Button - Used to control the LCD screen and toggle
through the available information options.
K. Enter Button - Used to choose selected items, enter to next
level menu or return to previous menu.
L. Outlet Indicator (switched series only) – Indicates if the
outlet is providing power to connected equipment.
A. Ground Stud - Use to ground the PDU.
Select
Enter
- Warning
- Normal
Tx/Rx Link
In / ENV Out
USB
Serial
1234567 8
- Critical

6
Product Features (1U 20A Models)
Front Panel Description
NEMA Type
IEC Type
A. AC Inlet/ AC Power Cord - Used to connect PDU to utility
power or UPS.
B. AC Output Receptacles - Provides power for connected
equipment.
C. Status Indicator - Indicates the condition of the PDU (eg.
load or environment status).
D. Multifunction LCD Readout - Displays various PDU
information such as power and load condition.
E. Ethernet Port – Used to connect PDU to the network.
F. ENVIROSENSOR/ Daisy Chain (In) Port (RJ45 modular port)
– Used for ENVIROSENSOR or chaining to previous PDU.
G. USB Port - Used to upgrade the firmware via a flash drive.
H. Serial Port (RJ45 modular port) - Used to connect to a PC
and control the PDU locally via SSH/Telnet.
I. Daisy Chain (Out) Port – Used for chaining to next PDU.
J. Select Button - Used to control the LCD screen and toggle
through the available information options.
K. Enter Button - Used to choose selected items, enter to next
level menu or return to previous menu.
L. Outlet Indicator (switched series only) – Indicates if the
outlet is providing power to connected equipment.
Rear Panel Description
A. Ground Stud - Use to ground the PDU.
Technical Specifications
Model Name
PDU81002
PDU71002
PDU41002
PDU31002
PDU81005
PDU71005
PDU41005
PDU31005
PDU81006
PDU71006
PDU41006
PDU31006
Input
Nominal Voltage 100-120V 100-240V 200-240V
Frequency 50/60Hz
Maximum Input Current 16A CE, UL (Derated)
Plug Type NEMA (L) 5-20P
(Adapter) IEC 320 C20 NEMA L6-20P
Power Cord Type SR (12 AWG) Socket
Power Cord Length 12 ft/3.65 m 10 ft/3.05 m 12 ft/3.65 m
Output
Nominal Voltage 100-120V 100-240V 200-240V
Maximum Output Current 16A CE, UL (Derated)
Outlet Type NEMA 5-20R IEC C13
Outlet Number 8
Management and Communications
Multifunction LCD Readout Voltage, Frequency, Load, Current, HW/FW Version, Network Information
Software PowerPanel® Business Edition
Networking Yes
Serial Port RJ45
Sensor Capable Optional
Physical
Dimensions (H x W x D) 1.75" x 17.05" x 4.41"/ 44mm x 433mm x 112mm
Environmental
Humidity 0 to 95% Non-condensing
Altitude 11480 ft/3500 m
Temperature 32oF to 131oF / 0oC to 55oC
Safety Approvals
Certifications UL 60950-1,
FCC Class A
UL 60950-1, CE,
FCC Class A
UL 60950-1,
FCC Class A
* All specifications are subject to change without notice.

7
Product Features (2U Models)
Front Panel Description
NEMA Type
IEC Type
Rear Panel Description
M
M
A. AC Inlet/ AC Power Cord - Used to connect PDU to utility
power or UPS.
B. AC Output Receptacles - Provides power for connected
equipment.
C. Status Indicator - Indicates the condition of the PDU (eg.
load or environment status).
D. Circuit Breaker – Provides overload protection.
E. ENVIROSENSOR/ Daisy Chain (In) Port (RJ45 modular port)
– Used for ENVIROSENSOR or chaining to previous PDU.
F. USB Port - Used to upgrade the firmware via a flash drive.
G. Serial Port (RJ45 modular port) - Used to connect to a PC
and control the PDU locally via SSH/Telnet.
H. Daisy Chain (Out) Port – Used for chaining to next PDU.
I. Ethernet Port – Used to connect PDU to the network.
J. Multifunction LCD Readout - Displays various PDU
information such as power and load condition.
K. Select Button - Used to control the LCD screen and toggle
through the available information options.
L. Enter Button - Used to choose selected items, enter to next
level menu or return to previous menu.
M. Outlet Indicator (switched series only) – Indicates if the
outlet is providing power to connected equipment.
A. Ground Stud - Use to ground the PDU.
Technical Specifications
Model Name
PDU81003
PDU71003
PDU41003
PDU31003
PDU81007
PDU71007
PDU41007
PDU31007
PDU81008
PDU71008
PDU41008
PDU31008
PDU81009
PDU71009
PDU41009
PDU31009
Input
Nominal Voltage 100-120V 200-240V
Frequency 50/60Hz
Maximum Input Current 24A UL (Derated)
Plug Type NEMA L5-30P NEMA L6-30P
Power Cord Type SR (10 AWG)
Power Cord Length 12 ft/3.65 m
Output
Nominal Voltage 100-120V 200-240V
Maximum Output Current 24A UL (Derated)
Maximum Output Current 20A (per bank)
Band Number 2
Outlet Type NEMA 5-20R IEC C13 12 IEC C13/ 4 IEC C19 IEC C19
Outlet Number 16 12+4 10
Circuit Breaker Yes
Management and Communications
Multifunction LCD Readout Voltage, Frequency, Load, Current, HW/FW Version, Network Information
Software PowerPanel® Business Edition
Networking Yes
Serial Port RJ45
Sensor Capable Optional
Physical
Dimensions (H x W x D) 3.5" x 17.05" x 4.41"/ 88mm x 433mm x 112mm
Environmental
Humidity 0 to 95% Non-condensing
Altitude 11480 ft/3500 m
Temperature 32oF to 113oF / 0oC to 45oC
Safety Approvals
Certifications UL 60950-1, FCC Class A
* All specifications are subject to change without notice.

8
Product Features (0U 16/20A Models)
Front Panel Description
NEMA Type IEC Type
A. AC Inlet/ AC Power Cord - Used to connect PDU to utility
power or UPS.
B. Outlet Indicator (switched series only) – Indicates if the outlet
is providing power to connected equipment.
C. Status Indicator - Indicates the condition of the PDU (eg. load
or environment status).
D. Multifunction LCD Readout - Displays various PDU
information such as power and load condition.
E. Ethernet Port - Used to connect PDU to the network.
F. ENVIROSENSOR/ Daisy Chain (In) Port (RJ45 modular port)
- Used for ENVIROSENSOR or chaining to previous PDU.
G. USB Port - Used to upgrade the firmware via a flash drive.
H. AC Output Receptacles - Provides power for connected
equipment.
I. Serial Port (RJ45 modular port) - Used to connect to a PC
and control the PDU locally via SSH/Telnet.
J. Daisy Chain (Out) Port - Used for chaining to next PDU.
K. Select Button - Used to control the LCD screen and toggle
through the available information options.
L. Enter Button - Used to choose selected items, enter to next
level menu or return to previous menu.
2422 2320 2118 191713 14 15 16129101167812345
-Critical -Warning
-Normal
Link
Tx/Rx
In / ENV
USB
Out
Serial
Enter
Select
-Critical -Warning
-Normal
Link
Tx/Rx
In / ENV
USB
Out
Serial
Enter
Select
12345679101112 13 14 15
16
17 18 19 20212223
24
8

9
* All specifications are subject to change without notice.
A. Bracket Screw Hole – Used to secure the Mounting
Brackets or Mounting Pegs.
Rear Panel Description
Product Features (0U 16/20A Models)
Technical Specifications
Model Name
PDU81101
PDU41101
PDU31101
PDU81104
PDU41104
PDU81404
PDU41404
PDU31114
PDU31414
Input
Nominal Voltage 100-120V 200-240V
Frequency 50/60Hz
Maximum Input Current 16A UL (Derated) 16A CE 16A UL (Derated)
16A CE
Plug Type NEMA (L)5-20P
(Adapter) NEMA L6-20P IEC 309 16A NEMA L6-20P
IEC 309 16A
Power Cord Type SR (12 AWG) Socket
Power Cord Length 10 ft/ 3.05 m
Output
Nominal Voltage 100-120V 200-240V
Maximum Input Current 16A UL (Derated) 16A CE 16A UL (Derated)
16A CE
Outlet Type NEMA 5-20R 21 IEC C13/ 3 IEC C19 18 IEC C13/ 2 IEC C19
Outlet Number 24 21+3 18+2
Management and Communications
Multifunction LCD Readout Voltage, Frequency, Load, Current, HW/FW Version, Network Information
Software PowerPanel® Business Edition
Networking Yes
Serial Port RJ45
Sensor Capable Optional
Physical
Dimensions (H x W x D) 65.5" x 2.2" x 1.9"/ 1665mm x 56mm x 48mm 35.5" x 2.2" x 1.9"/
902mm x 56mm x 48mm
Environmental
Humidity 0 to 95% Non-condensing
Altitude 11480 ft/ 3500 m
Temperature 32oF to 140oF/ 0oC to 60oC 32oF to 131oF/ 0oC to 55oC
Safety Approvals
Certifications UL 60950-1, FCC Class A CE
FCC Class A
UL 60950-1, FCC Class A
CE, FCC Class A

10
Product Features (0U 30/32A Models)
Front Panel Description
NEMA Type IEC Type
2422 2320 2118 19
BANK 2
1713 14 15 16129101167812345
BANK 1
BANK 2 (20A)BANK 1 (20A)
-Critical
-Warning
-Normal
Link
Tx/Rx
In / ENV
USB
Out
Serial
Enter
Select
BANK 1
M
BANK 2 (20A)BANK 1 (20A)
-Critical
-Warning -Normal
Link
Tx/Rx
In / ENV
USB
Out
Serial
Enter
Select
1234
BANK 1
567
8
9101112131415
16
17 18
BANK 2
19 20 21 22 23
24
BANK 1
M
A. AC Inlet/ AC Power Cord - Used to connect PDU to utility
power or UPS.
B. Outlet Indicator (switched series only) – Indicates if the outlet
is providing power to connected equipment.
C. Status Indicator - Indicates the condition of the PDU (eg. load
or environment status).
D. Multifunction LCD Readout - Displays various PDU
information such as power and load condition.
E. Ethernet Port - Used to connect PDU to the network.
F. ENVIROSENSOR/ Daisy Chain (In) Port (RJ45 modular port)
- Used for ENVIROSENSOR or chaining to previous PDU.
G. USB Port - Used to upgrade the firmware via a flash drive.
H. AC Output Receptacles - Provides power for connected
equipment.
I. Serial Port (RJ45 modular port) - Used to connect to a PC
and control the PDU locally via SSH/Telnet.
J. Daisy Chain (Out) Port - Used for chaining to next PDU.
K. Select Button - Used to control the LCD screen and toggle
through the available information options.
L. Enter Button - Used to choose selected items, enter to next
level menu or return to previous menu.
M. Circuit Breaker – Provides overload protection.

11
Technical Specifications
Model Name
PDU81102
PDU41102
PDU31102
PDU81105
PDU41105
PDU81405
PDU41405
PDU31106 PDU31406
Input
Nominal Voltage 100-120V 200-240V
Frequency 50/60Hz
Maximum Input Current 24A UL (Derated) 32A CE
Plug Type NEMA L5-30P NEMA L6-30P IEC 309 32A
Power Cord Type SR (10 AWG)
Power Cord Length 10 ft/ 3.05m
Output
Nominal Voltage 100-120V 200-240V
Maximum Output Current 24A UL (Derated) 32A CE
Maximum Output Current 20A (per bank)
Outlet Type NEMA 5-20R 21 IEC C13/ 3 IEC C19
36 IEC C13/ 6 IEC C19
Outlet Number 24 21+3
36+6
Circuit Breaker Yes
Management and Communications
Multifunction LCD Readout Voltage, Frequency, Load, Current, HW/FW Version, Network Information
Software PowerPanel® Business Edition
Networking Yes
Serial Port RJ45
Sensor Capable Optional
Physical
Dimensions (H x W x D) 65.5" x 2.2" x 1.9"/ 1665mm x 56mm x 48mm
Environmental
Humidity 0 to 95% Non-condensing
Altitude 11480 ft/3500 m
Temperature 32oF to 140oF / 0oC to 60oC 32oF to 131oF/ 0oC to 55oC
Safety Approvals
Certifications UL 60950-1, FCC Class A CE, FCC Class A
* All specifications are subject to change without notice.
A. Bracket Screw Hole – Used to secure the Mounting
Brackets or Mounting Pegs.
Rear Panel Description
Product Features (0U 30/32A Models)

12
Installation Guide
Please use only the provided screws through the
entire installation process.
Horizontal Installation
For 1U Models
Step 1. Mounting Bracket Installation
Use the provided Mounting Bracket Screws (8) to attach the
SHORT Mounting Brackets (2) to the PDU.
Step 2. PDU Mounting
Use the supplied Washers (4) and Screws (4) to secure the
PDU to your existing rack system.
Note: You may also use the screw sets provided by the rack
to secure the PDU.
If you plan on attaching the Cord Retention Tray to the PDU,
you will need to use the LONG Mounting Brackets (2).

13
For 2U Models
Step 1. Mounting Bracket Installation
Use the provided Mounting Bracket Screws (8) to attach the
Mounting Brackets (2) to the PDU.
Step 3. Cord Retention Tray Installation (optional)
Adjust the length of the Cord Retention Tray till the
screw hole on the Tray and PDU are aligned. Attach the
Cord Retention Tray to the PDU with the 4 supplied
Cord Retention Tray Mounting Screws. Tighten the Cord
Retention Tray with the screw on it.
Use the provided Cable Ties to fasten each cord to the Cord
Retention Tray.
Note: If the PDUs are intended to install in a high temperature
environment, please use the Power Cords that could sustain
high temperature operation.
Installation Guide

14
Use the provided Cable Ties to fasten each cord to the Cord
Retention Tray.
Step 2. PDU Mounting
Use the supplied Washers (4) and Screws (4) to secure the
PDU to your existing rack system.
Note: You may also use the screw sets provided by the rack
to secure the PDU.
Step 3. Cord Retention Tray Installation (optional)
Adjust the length of the Cord Retention Tray till the
screw hole on the Tray and PDU are aligned. Attach the
Cord Retention Tray to the PDU with the 8 supplied
Cord Retention Tray Mounting Screws. Tighten the Cord
Retention Tray with the screw on it.
Installation Guide

15
Use the provided Cable Ties to fasten each cord to the Cord
Retention Tray.
Step 1. Mounting Bracket Installation
Use the provided Mounting Bracket Screws (8) to attach the
SHORT Mounting Brackets (2) to the PDU.
Step 2. PDU Mounting
Use the supplied Washers (2) and Screws (2) to secure the
PDU to your existing rack system.
Note: You may also use the screw sets provided by the rack
to secure the PDU.
Vertical Installation
For 1U Models
Installation Guide
For 0U Models
Step 1. PDU Mounting
Align the Keyhole Mounts to the Keyhole Slots on the rack.
Insert and slide down to lock firmly into the place.

16
Installation Guide
If there is no Keyhole Slot on your rack, please choose from
the following methods that is best for your rack deployment
to secure the PDU.
Use the supplied Washers and Rack Mounting Screws to
attach the Mounting Brackets to your existing rack system.
Align the Keyhole Mounts to the Keyhole Slots on the
Mounting Brackets. Insert and slide down to lock firmly into
the place.
Method 1
Method 2

17
Method 3
Installation Guide

18
Step 2. Cord Retention Tray Installation (optional)
Adjust the length of the Cord Retention Tray till the screw
hole on the Tray and PDU are aligned. Attach the Cord
Retention Tray to the PDU with the supplied Cord Retention
Tray Mounting Screws. Tighten the Cord Retention Tray with
the screw on it.
Use the provided Cable Ties to fasten each cord to the Cord
Retention Tray.
Note: If the PDUs are intended to install in a high temperature
environment, please use the Power Cords that could sustain
high temperature operation.
Installation Guide