Cycle Torch Front Bolt User manual

User Manual
Bolt Combo

1. Safety Precaution 3
2. How to Install 4
3. How to Charge 5
4. Switching Lighting Modes 6
5. Model Specications 7
6. Warranty, Support, and Customer Service 8
Thank you for purchasing
one of our products!
We are truly honored to be able to serve you and provide you with the best Experience possible.
If you’ve enjoyed our product, we would sincerely appreciate your honest feedback.
To ensure maximum experience and safety, familiarize yourself with ALL aspects of your new light
and battery system:
If for any reason you are not sased, please contact us as soon
as possible at [e-mail] , so that we can help you
to solve any issues!

FRONT & TAIL BOLTS USER MANUAL 3
1
Safety Precaution
1Never look directly into the
Front Bolt /
Tail Bolt ;
2Do not place it within children’s reach;
3Before your trip, please make sure that the
Front Bolt and Tail Bolt are rmly mounted,
they light up, and the lights are not blocked
by baggage;
4This product is water-resistant under
normal daily use and can be used in
the rain. However, do not intentionally
submerge it in water.
A lighting system can make riding safer and
more visible, but the lights are no substitute for
common sense. Ride within your capability
with consideration for the riding environment.
This product contains components that must be
recycled per EU Directive 2002/96/EC and may
not be disposed of as unsorted municipal waste!
Failure to follow these cauons may expose you to risks,
can cause damage to the light system and will void the warranty!

FRONT & TAIL BOLTS USER MANUAL 4
How to Install
2
FRONT BOLT
TAIL BOLT
1 2 3
1 2 3
1 2 3
1 2 3
Attach the rubber strap to one
end of the light bracket;
Hold the light with one hand
and with another hand secure
it with the rubber strap across
the handlebar;
For further details, click the
link and watch the video:
cycletorch.com/pages/videos
Attach the rubber strap to one
end of the light bracket;
Hold the light with one hand
and with another hand secure
it with the rubber strap across
the seatpost;
For further details, click the
link and watch the video:
cycletorch.com/pages/videos

FRONT & TAIL BOLTS USER MANUAL 5
How to Charge
FRONT BOLT & TAIL BOLT
3
1 2 3
1 2 3

Remove the rubber cap at the
bottom of Front Bolt / Tail Bolt;
Connect the Front Bolt / Tail
Bolt to your PC or a 5V max 2A
USB battery charger with the
USB cable. The lens lights up
red when the charging starts;
When the lens lights up green
- charging is complete. Remove
the USB cable;
Full charging time: 2 ~ 4 hours
WARNING
TIPS AND TRICKS:
• When your PC is in sleep state, the light cannot be charged;
• Flashing light of the power button shows that a charging error has occurred. Remove and reinsert
the USB cable, then begin the recharge process again;
• The battery charges to about 80% after approximately 2 hours;
• Charging and lighting times are approximate values and will vary by environmental and user conditions.
The cable (or other accessories) supplied with the Cycle Torch bike lights MUST be
used only to charge the Cycle Torch bike lights. The Manufacture or/and the Seller
are not responsible for any damage caused by using the supplied accessories with
devices other than Cycle Torch bike lights.
WARNING

FRONT & TAIL BOLTS USER MANUAL 6
4
Switching lighting modes
OPERATION MODES
The initial two short presses (or single press for
earlier models) of the power button will turn on
the light on High mode. Each additional short
press of the button switches the light from one
mode to the next, in the following order:
1High
2Slow ashing
3Quick ashing
4Pulse
5O
TURNING OFF
Press & Hold of the power button will
shut down the
Front Bolt / Tail Bolt.
RUNNING TIME:
2,5 – 8 hours for the
Front Bolt ,
5 – 20 hours for the Tail Bolt,
depending on the use mode.
LOW BATTERY LEVEL
The
Front Bolt / Tail Bolt will automatically turn
o when the battery level is too low. This system
protects the battery from damage, but since it
draws a small amount of current, it can drain the
battery beyond the minimum voltage of the bat-
tery. That’s why it’s not recommended to turn ON
the lights after the programmed shutdown.
Do not wait unl the bike light goes completely out as this will greatly reduce
the number of charge cycles that the baery can be used and can render the
baery unusable. It is highly recommended to recharge periodically the bike lights.
Charge your bike lights every 2-3 months when stored or not in use to prevent baery
degradaon.
FRONT BOLT
Operating modes: High Slow ashing
Quick
ashing Pulse
Run time (in hours) 2,5 8-10 5-8 5-8
Power (in lumens) 20 20 20 20
TAIL BOLT
Operating modes: High Slow ashing
Quick
ashing Pulse
Run time (in hours) 515-20 10-15 10-15
Power (in lumens) 10 10 10 10
FRONT & TAIL BOLTS
Operation/
Power button

FRONT & TAIL BOLTS USER MANUAL 7
5
Model Specications
FRONT BOLT
• Model range: White Headlight
• Brightness: 20 lm
• Water-resistant grade: IP65
• Light source: 3535 ultra-bright LED
• LED lifespan: 50,000 hours
• Battery: lithium-polymer rechargeable
• Charge time: 2 ~ 4 hours
• Battery running time:
- 150 minutes in High mode
- 480 ~ 600 minutes in Slow ashing mode
- 300 ~ 480 minutes in Quick ashing
- 300 ~ 480 minutes in Pulse mode
• Material: high-quality aluminum and top-class
nylon plastic (ABS)
• Finish: black
• Included accessories:
- Silicone strap which ts all standard seat posts;
- Micro USB charging cable.
• Weight: 30 g
TAIL BOLT
• Model range: Tail Bolt
• Brightness: 10 lm
• Water-resistant grade: IP65
• Light source: 3535 ultra-bright LED
• LED lifespan: 50,000 hours
• Battery: lithium-polymer rechargeable
• Charge time: 2 ~ 4 hours
• Battery running time:
- 300 minutes in High mode
- 900 ~ 1200 minutes in Slow ashing mode
- 600 ~ 900 minutes in Quick ashing
- 600 ~ 900 minutes in Pulse mode
• Material: high-quality aluminum and top-class
nylon plastic (ABS)
• Finish: black
• Included accessories:
- Silicone strap which ts all standard seat posts;
- Micro USB charging cable.
• Weight: 30 g

FRONT & TAIL BOLTS USER MANUAL 8
6
Warranty, Support,
and Customer Service
To register your product please go to
https://cycletorch.com and follow the steps.
Our product quality is controlled strictly in ac-
cordance within the standards of Cycle Torch
quality certication program.
To ensure that all users enjoy the product, we
oer one year warranty within one year from
purchase date, under normal use, the consumer
will be provided free warranty service for any
quality-related problems!
WARRANTY SERVICE EXCLUSIONS:
1Any damages that are caused by other than
normal use, including, but not limited to
physical damages.
2Any user modication, repairs, or disassembly
of the product without factory authorization.
3Missing warranty Registration.
When requesng warranty service, customer should present
Amazon Order ID or numbers provided by online retailers.
For further informaon concerning
warranty condions or for any
addional issues, please e-mail us at:
[e-mail]