CYP PU-O4H4C User manual

PU-O4H4C
4 by 4 HDMI V1.3
over CAT 6 Matrix with IR
Return Control
Operation Manual
PU-O4H4C

Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
 Always follow basic safety precautions to reduce the risk of
fire, electrical shock and injury to persons.
 To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
 Never spill liquid of any kind on or into this product.
 Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
 Do not attach the power supply cabling to building surfaces.
 Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
 To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.
Revision History
Version No Date Summary of Change
V1 20091001 Preliminary Release

Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
 Always follow basic safety precautions to reduce the risk of
fire, electrical shock and injury to persons.
 To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
 Never spill liquid of any kind on or into this product.
 Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
 Do not attach the power supply cabling to building surfaces.
 Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
 To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.
Revision History
Version No Date Summary of Change
V1 20091001 Preliminary Release

Table of Contents
1
1
1
1
2
3
4
4
4
6
6
6
7
8
8
8
8
8
9
10
1. Introduction.....……………………..…………………................................
2. Applications...........................…..…………………………………….....…
3. Package Contents..............................……………………………….…….
4. System Requirements.............................……………………………..……
5. Features................................…..…………………………………...………..
6. Specications..........................................................................................
7. Operation Controls and Functions.....................……...……...…………..
7.1. Front Panel......................…………………………………...…………..
7.2. Rear Panel.......................…………………………………...…………..
8. Remote Control.......................…..……………………………...…………..
9. RS-232 Protocol.......................…………..……………………...…………..
9.1 Pin Denitions................…………..……………...……...………......…..
9.2 Commands................…………………….……………...……….....…..
9.3. IR Cable Pin Denitions................………….……………...……....…..
10. 3.5Ø Connectors Pin Denitions.............................................................
10.1 IR IN Pin Denitions...........…………..……………………..……….…..
10.2 IR OUT Pin Denitions..........………………….…………….…………..
10.3 RJ-45 Pin Denitions...………….……………...………..................…..
11. Connection and Installation...................................................................
12. Acronyms.................................................................................................
1. Introduction
This HDMI over CAT6 Matrix is a high performance equipment with remote
control, IR blaster and receiver. It is compatible with HDMI v1.3 specifications, a
cutting-edge technology which defines support for Deep Color (12 bits/color)
video and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and
DTS-HD Master Audio) digital audio. It offers you the maximum convenience
in HDMI signal distribution, when you need to have multiple HDMI sources and
displays connected together. Each of the four HDMI sources can be directed
to any one of the four HDMI displays, so each display can show a different
source. When HDMI signal progresses through the system, it is re-timed, and
level-compensated. Furthermore, Since signal is transferred over CAT 6, the
distance can be extended over a long range (>50m at 1080p 8 bits) yet at
a very low cost. CAT 6 connection can also be built with cascaded function
with other devices to enjoy real time play and no signal loss. Moreover, with
four induviduals output IR blaster systems users can easily control the input
source by the existing remote controls.
2. Applications
 Multi-source with multi-display control
 Home entertainment integration
 Multi-task project presentation
 Showroom Display
 Advertising Display control
 System installation control
3. Package Contents
 4 by 4 HDMI V1.3 Matrix
 Remote Control (with Battery)
 1 x IR Receiver
 5 x IR Blaster
 5V DC Power Supply Adaptor
 Power Cord
 Operation Manual
4. System Requirements
 Input source equipment with HDMI cable(s).
 Output source equipment(s) with HDMI cable(s) and CAT 6 to HDMI
receiver(s).
1

Table of Contents
1
1
1
1
2
3
4
4
4
6
6
6
7
8
8
8
8
8
9
10
1. Introduction.....……………………..…………………................................
2. Applications...........................…..…………………………………….....…
3. Package Contents..............................……………………………….…….
4. System Requirements.............................……………………………..……
5. Features................................…..…………………………………...………..
6. Specications..........................................................................................
7. Operation Controls and Functions.....................……...……...…………..
7.1. Front Panel......................…………………………………...…………..
7.2. Rear Panel.......................…………………………………...…………..
8. Remote Control.......................…..……………………………...…………..
9. RS-232 Protocol.......................…………..……………………...…………..
9.1 Pin Denitions................…………..……………...……...………......…..
9.2 Commands................…………………….……………...……….....…..
9.3. IR Cable Pin Denitions................………….……………...……....…..
10. 3.5Ø Connectors Pin Denitions.............................................................
10.1 IR IN Pin Denitions...........…………..……………………..……….…..
10.2 IR OUT Pin Denitions..........………………….…………….…………..
10.3 RJ-45 Pin Denitions...………….……………...………..................…..
11. Connection and Installation...................................................................
12. Acronyms.................................................................................................
1. Introduction
This HDMI over CAT6 Matrix is a high performance equipment with remote
control, IR blaster and receiver. It is compatible with HDMI v1.3 specifications, a
cutting-edge technology which defines support for Deep Color (12 bits/color)
video and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and
DTS-HD Master Audio) digital audio. It offers you the maximum convenience
in HDMI signal distribution, when you need to have multiple HDMI sources and
displays connected together. Each of the four HDMI sources can be directed
to any one of the four HDMI displays, so each display can show a different
source. When HDMI signal progresses through the system, it is re-timed, and
level-compensated. Furthermore, Since signal is transferred over CAT 6, the
distance can be extended over a long range (>50m at 1080p 8 bits) yet at
a very low cost. CAT 6 connection can also be built with cascaded function
with other devices to enjoy real time play and no signal loss. Moreover, with
four induviduals output IR blaster systems users can easily control the input
source by the existing remote controls.
2. Applications
 Multi-source with multi-display control
 Home entertainment integration
 Multi-task project presentation
 Showroom Display
 Advertising Display control
 System installation control
3. Package Contents
 4 by 4 HDMI V1.3 Matrix
 Remote Control (with Battery)
 1 x IR Receiver
 5 x IR Blaster
 5V DC Power Supply Adaptor
 Power Cord
 Operation Manual
4. System Requirements
 Input source equipment with HDMI cable(s).
 Output source equipment(s) with HDMI cable(s) and CAT 6 to HDMI
receiver(s).
1
1

5. Features
 HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant
 Supports digital video formats in Deep Color Mode of up to 36 bits (12bits/
color) and new lossless compressed (Dolby TrueHD, Dolby Digital Plus
and DTS-HD Master Audio) digital audio
 HDMI input compensation, clock / phase adjustments, and jitter
eliminated guaranteed to output a brand new standard HDMI signal
 Supports input source LED indicators on each output select
 Compatible with all HDMI sources and displays
 Supports a wide range of PC and HDTV resolutions from VGA to UXGA
and 480i to 1080p
 Supports RS-232 control
 Supports IR remote control with IR extender and blaster
 Dolby Digital, DTS digital audio transmission (32-192 kHz Fs sample rate)
 Supports CAT 6 cables of variable types
 Defines HDCP, HDMI and DVI source via LED light
 Supports high definition resolution, the cable distance test at 1080p/8
or 12 bits resolution: input & output sources max. distance up to 15
meters
Notes:
A. Cable used during testis CAT-6E / 23AWG / Solid and therefore, cables of
different specification may have different distance results.
B. Cable distance test equipment used: PS3 20G, 37" Philips 8 bit LCD TV and
37" SamSung 12 bit LCD TV.
C. Figures provided in this manual are for reference use only, actual figures
very depending on source and display used with cable specification.
2
2

5. Features
 HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant
 Supports digital video formats in Deep Color Mode of up to 36 bits (12bits/
color) and new lossless compressed (Dolby TrueHD, Dolby Digital Plus
and DTS-HD Master Audio) digital audio
 HDMI input compensation, clock / phase adjustments, and jitter
eliminated guaranteed to output a brand new standard HDMI signal
 Supports input source LED indicators on each output select
 Compatible with all HDMI sources and displays
 Supports a wide range of PC and HDTV resolutions from VGA to UXGA
and 480i to 1080p
 Supports RS-232 control
 Supports IR remote control with IR extender and blaster
 Dolby Digital, DTS digital audio transmission (32-192 kHz Fs sample rate)
 Supports CAT 6 cables of variable types
 Defines HDCP, HDMI and DVI source via LED light
 Supports high definition resolution, the cable distance test at 1080p/8
or 12 bits resolution: input & output sources max. distance up to 15
meters
Notes:
A. Cable used during testis CAT-6E / 23AWG / Solid and therefore, cables of
different specification may have different distance results.
B. Cable distance test equipment used: PS3 20G, 37" Philips 8 bit LCD TV and
37" SamSung 12 bit LCD TV.
C. Figures provided in this manual are for reference use only, actual figures
very depending on source and display used with cable specification.
2
Frequency Bandwidth 2.25Gbps (single link)
Input Ports 4 x HDMI female ports,
Output Ports 4 x Video/DDC CAT 6 ports
EDID Standard, TV/Moving Port 1
ESD Protection Human body model: ± 10kV (air-gap discharge)
± 6kV (contact discharge)
HDMI Audio Output PCM2, PCM5.1, PCM7.1, Dolby5.1, DTS5.1, DD+,
D-TrueHD, and DTS-HD
HDMI Cable In 1080p 8-bit (15M), 1080p 12-bit (15M)
HDMI Cable Out 1080p 8-bit (15M), 1080p 12-bit (15M)
CAT 6 Cable Out 1080p 8-bit (45M), 1080p 12-bit (15M)
Color Space RGB_24/36, YCbCr 4:4:4_24/36, YCbCr 4:2:2, xvYCC
IR IN/OUT Yes/Yes
Deep Color 1080p 12-bit
HDMI Resolution 480i~1080p 50/60, 1080p 24, VGA~UXGA
DVI Resolution 480i~1080p 50/60, 1080p 24, VGA~UXGA
Power Supply 5VDC/6A (US/EU standards, CE/FCC/UL certified)
Dimensions (mm) 438(W) x 175(D) x 44(H)
Weight(g) 2150
Chassis Material Aluminum
Silkscreen Color Black
Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature -20°C ~ 60°C / -4°F ~ 104°F
Relative Humidity 20% ~ 90% RH (non-condensing)
Power Consumption 16.5W (MAX)
6. Specications
3
3

7. Operation Controls and Functions
7.1 Front Panel
①. Remote control sensor.
②. Power switch & LED Indicator: This LED will illuminate when the power is
turned on.
③. Input Select/Indicators (A/B/C/D): Press each “HDMI out” button
repeatedly to switch to your desired source. The LED that illuminates to
indicate the input source being selected and routed to HDMI A display.
④. HDCP indicators: This LED will illuminate once the input source being
played comes with a HDCP protection.
⑤. HDMI/DVI indicators: When the input is HDMI content, this LED will
illuminate. When playing DVI from the input source, this LED will not
illuminate.
7.2 Rear Panel
①. EDID Control Switcher: Default factory setting is on TV, leave as it is when
the display is displaying properly. Switch to STD to use built-in EDID.
Note:
1. When EDID is switched to TV, the unit will detect the first HDMI output
source’s EDID and record it in the unit. If the first detected output
source is DVI, it will skip onto the next source until the first HDMI source
is detected. The detection priority is HDMI v1.3 > HDMI v1.2 > DVI.
CMLUX-4H4CAT
HDMI V1.3 to CAT6 4X4 Matrix
POWER 1 2 3 4 HDCP HDMI/DVI 1234 HDCP HDMI/DVI 1234 HDCP HDMI/DVI 1 2 3 4 HDCP HDMI/DVI
IN IN IN IN
A BHDMI OUT C D
①② ③ ④⑤
CAT6 OUTPUT
HDMI INPUT
IR OUT
STD TV DDC VIDEO
EDID
4 3 2 1
4 3 21
DC 5V
DDDC VIDEO CDDC VIDEO BDDC VIDEO A
IN OUT
IR MAIN
RS-232
③ ④ ⑤ ⑥⑦⑧
①②
4
PU-O4H4C
HDMI V1.3 to CAT6 4X4 Matrix
POWER
IN
1234 HDCP HDMI/DVI 1234 HDCP HDMI/DVI 1234 HDCP HDMI/DVI 1 2 3 4 HDCP HDMI/DVI
A BHDMI OUT C D
IN IN IN
①② ③ ④⑤
CAT6 OUTPUT
HDMI INPUT
IR OUT
STD TV DDC VIDEO
EDID
4 3 2 1
4 3 21
DC 5V
DDDC VIDEO CDDC VIDEO BDDC VIDEO A
IN OUT
IR MAIN
RS-232
③ ④ ⑤ ⑥⑦⑧
①②
2. When EDID is switched to STD, the unit will use its built-in EDID that
supports:
Video →1080p 12-bit (max) supports xvYCC
Audio →PCM 2CH
3. The EDID selection will only be activated after the unit is re-plugged
and powered on.
②. RS-232: This slot is where you connect a D-Sub 9-pin cable to the PC COM
port when controlling the device over RS-232. Detailed specifications are
listed in section 9.
③. Video/DDC CAT 6 outputs: These slots are where you connect two
CAT6 cables to a receiver box that has HDMI output and through the
HDMI output it can be connect to TV. The receiver box can also be a
splitter that provides additional CAT6 outputs when cascading from a
HDMI receiver to the display via HDMI cable.
④． IR OUT: These slots are where you connect with IR blaster cables included
in the package. Place it near each designate source equipment for
infrared signal sending.
⑤. HDMI inputs: These slots are where you connect input ports to the HDMI
or DVI output of your source equipments such as DVD player or set-top-
box with HDMI cables.
⑥. Power: Plug the 5VDC power supply into the unit and connect the
adaptor to an AC wall outlet.
⑦. IR MAIN IN: This slot is where you connect the IR receiver cable included
in the package. Connecting the IR receiver cable allows you to source
equipments through the existing remote controls.
⑧. IR MAIN OUT: This slot is where you connect the IR blaster cable included
in the package. Place it near both the device and/or source equipments
for infrared signal sending.
5
4

7. Operation Controls and Functions
7.1 Front Panel
①. Remote control sensor.
②. Power switch & LED Indicator: This LED will illuminate when the power is
turned on.
③. Input Select/Indicators (A/B/C/D): Press each “HDMI out” button
repeatedly to switch to your desired source. The LED that illuminates to
indicate the input source being selected and routed to HDMI A display.
④. HDCP indicators: This LED will illuminate once the input source being
played comes with a HDCP protection.
⑤. HDMI/DVI indicators: When the input is HDMI content, this LED will
illuminate. When playing DVI from the input source, this LED will not
illuminate.
7.2 Rear Panel
①. EDID Control Switcher: Default factory setting is on TV, leave as it is when
the display is displaying properly. Switch to STD to use built-in EDID.
Note:
1. When EDID is switched to TV, the unit will detect the first HDMI output
source’s EDID and record it in the unit. If the first detected output
source is DVI, it will skip onto the next source until the first HDMI source
is detected. The detection priority is HDMI v1.3 > HDMI v1.2 > DVI.
CMLUX-4H4CAT
HDMI V1.3 to CAT6 4X4 Matrix
POWER 1 2 3 4 HDCP HDMI/DVI 1234 HDCP HDMI/DVI 1234 HDCP HDMI/DVI 1 2 3 4 HDCP HDMI/DVI
IN IN IN IN
A BHDMI OUT C D
①② ③ ④⑤
CAT6 OUTPUT
HDMI INPUT
IR OUT
STD TV DDC VIDEO
EDID
4 3 2 1
4 3 21
DC 5V
DDDC VIDEO CDDC VIDEO BDDC VIDEO A
IN OUT
IR MAIN
RS-232
③ ④ ⑤ ⑥⑦⑧
①②
4
2. When EDID is switched to STD, the unit will use its built-in EDID that
supports:
Video →1080p 12-bit (max) supports xvYCC
Audio →PCM 2CH
3. The EDID selection will only be activated after the unit is re-plugged
and powered on.
②. RS-232: This slot is where you connect a D-Sub 9-pin cable to the PC COM
port when controlling the device over RS-232. Detailed specifications are
listed in section 9.
③. Video/DDC CAT 6 outputs: These slots are where you connect two
CAT6 cables to a receiver box that has HDMI output and through the
HDMI output it can be connect to TV. The receiver box can also be a
splitter that provides additional CAT6 outputs when cascading from a
HDMI receiver to the display via HDMI cable.
④． IR OUT: These slots are where you connect with IR blaster cables included
in the package. Place it near each designate source equipment for
infrared signal sending.
⑤. HDMI inputs: These slots are where you connect input ports to the HDMI
or DVI output of your source equipments such as DVD player or set-top-
box with HDMI cables.
⑥. Power: Plug the 5VDC power supply into the unit and connect the
adaptor to an AC wall outlet.
⑦. IR MAIN IN: This slot is where you connect the IR receiver cable included
in the package. Connecting the IR receiver cable allows you to source
equipments through the existing remote controls.
⑧. IR MAIN OUT: This slot is where you connect the IR blaster cable included
in the package. Place it near both the device and/or source equipments
for infrared signal sending.
5
5

8. Remote Control
1. Power: Press this button to turn on/off the unit.
2. Input Select for HDMI OUT A: Press 1, 2, 3 or 4 to
select the desired input source for HDMI OUT A.
3. Input Select for HDMI OUT B: Press 1, 2, 3 or 4 to
select the desired input source for HDMI OUT B.
4. Input Select for HDMI OUT C: Press 1, 2, 3 or 4 to
select the desired input source for HDMI OUT C.
5. Input Select for HDMI OUT D: Press 1, 2, 3 or 4
to select the desired input source for HDMI OUT D.
9. RS-232 Protocol
9.1 Pin Denitions
* RS-232 transmission format:
Baud Rate: 9600bps
Data Bit: 8 bits
Parity: None
Stop Bit: 1 bit
Flow Control: None
5
CMLUX-4H4CAT Remote Control Console
PIN Denitions
→
←
PIN Denitions
1 NC 1 NC
2 TxD 2 RxD
3 RxD 3 TxD
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
6
PU-O4H4C
9.2 Commands
COMMAND ACTION
POWER 00
;
Power Off (standby)
POWER 01
;
Power On
PORT 11
;
Output A select Input1
PORT 12
;
Output A select Input2
PORT 13
;
Output A select Input3
PORT 14
;
Output A select Input4
PORT 21
;
Output B select Input1
PORT 22
;
Output B select Input2
PORT 23
;
Output B select Input3
PORT 24
;
Output B select Input4
PORT 31
;
Output C select Input1
PORT 32
;
Output C select Input2
PORT 33
;
Output C select Input3
PORT 34
;
Output C select Input4
PORT 41
;
Output D select Input1
PORT 42
;
Output D select Input2
PORT 43
;
Output D select Input3
PORT 44
;
Output D select Input4
7
6

8. Remote Control
1. Power: Press this button to turn on/off the unit.
2. Input Select for HDMI OUT A: Press 1, 2, 3 or 4 to
select the desired input source for HDMI OUT A.
3. Input Select for HDMI OUT B: Press 1, 2, 3 or 4 to
select the desired input source for HDMI OUT B.
4. Input Select for HDMI OUT C: Press 1, 2, 3 or 4 to
select the desired input source for HDMI OUT C.
5. Input Select for HDMI OUT D: Press 1, 2, 3 or 4
to select the desired input source for HDMI OUT D.
9. RS-232 Protocol
9.1 Pin Denitions
* RS-232 transmission format:
Baud Rate: 9600bps
Data Bit: 8 bits
Parity: None
Stop Bit: 1 bit
Flow Control: None
5
CMLUX-4H4CAT Remote Control Console
PIN Denitions
→
←
PIN Denitions
1 NC 1 NC
2 TxD 2 RxD
3 RxD 3 TxD
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
6
9.2 Commands
COMMAND ACTION
POWER 00
;
Power Off (standby)
POWER 01
;
Power On
PORT 11
;
Output A select Input1
PORT 12
;
Output A select Input2
PORT 13
;
Output A select Input3
PORT 14
;
Output A select Input4
PORT 21
;
Output B select Input1
PORT 22
;
Output B select Input2
PORT 23
;
Output B select Input3
PORT 24
;
Output B select Input4
PORT 31
;
Output C select Input1
PORT 32
;
Output C select Input2
PORT 33
;
Output C select Input3
PORT 34
;
Output C select Input4
PORT 41
;
Output D select Input1
PORT 42
;
Output D select Input2
PORT 43
;
Output D select Input3
PORT 44
;
Output D select Input4
7
7

9.3. IR Cable Pin Denitions
Note: The frequency on both IR Receiver & Blaster can support 20~60KHz.
10. 3.5Ø Connectors Pin Denitions
10.1 IR IN Pin Denitions
10.2 IR OUT Pin Denitions
10.3 RJ-45 Pin Denitions
IR Blaster IR Receiver
① ②
① Power 5V
② IR blaster signal
③ IR blaster signal
① IR signal
② Power 5V
③ Grounding
① ② ③③
Pin Assignment
1 Power 5V
2 IR Signal
3 GND
Pin Assignment
1 IR Blaster Signal
2 Power 5V
3 IR Blaster Signal
Pin Video DDC
1 TX2+ DDC Bus Clock
2 TX2- NC
3 TX1+ DDC Bus Data
4 TX0+ Power 5V
5 TX0- GND
6 TX1- IR IN
7 TXC+ HPD
8 TXC- NC
8
8

11. Connection and Installation
9
30° 30°
3M 3M
7M
OUTPUT
A
OUTPUT
D
OUTPUT
C
OUTPUT
B
POWER
CR-33
HDMI Cable
For Play A
For Play B
For Play C
For Play D
CLUX-22HC CLUX-1CAT4H CLUX-1CAT8H CH-1106RX
CAT 6 Cable
IR
Receiver
HD TV
HDMI
Line IR Receiver
HDMI
HDMI
30° 30°
3M 3M
7M
30°
30°
3M 3M
7M
30°
30°
3M 3M
3M
30°
30°
3M 3M
3M
HDMI
Line
HDMI
HDMI
HD TV
30° 30°
3M 3M
7M
HD TV
HDMI
Line
HDMI
HDMI
30° 30°
3M 3M
7M
HD TV
HDMI
Line
HDMI
HDMI
Play A
Play B
Play C
Play D
IR Blaster
for all players

10
Acronyms A
Acronym Complete Term
CAT6 Catergory 6 Cable
DTS Digital Theater Systems
DVI Digital Visual Interface
EDID Extended Display Identification Data
HDCP High-Bandwidth Digital Content Protection
HDMI High-Definition Multimedia Interface
IR Infrared
UXGA Ultra Extended Graphics Array
VGA Video Graphics Array
10

10
Acronyms A
Acronym Complete Term
CAT6 Catergory 6 Cable
DTS Digital Theater Systems
DVI Digital Visual Interface
EDID Extended Display Identification Data
HDCP High-Bandwidth Digital Content Protection
HDMI High-Definition Multimedia Interface
IR Infrared
UXGA Ultra Extended Graphics Array
VGA Video Graphics Array