CYP CHDBT-1H7CPL User manual

CHDBT-1H7CPL
1 by 8 HDMI over HDMI & CAT5e/6/7 Splitter
Operation Manual
Operation Manual

DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2014 by Cypress Technology.
All Rights Reserved.
Version 1.0 August 2014
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 06/08/14 Preliminary Release

CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6.1 Front Panel ........................................3
6.2 Rear Panel.........................................3
6.3 IR Cable Pin Assignment..................5
7. Connection Diagram ............................ 6
8. Specications ........................................ 7
8.1 CAT5e/6/7 Cable Specication .....8
9. Acronyms ............................................... 8

1
1. INTRODUCTION
The HDMI over HDMI and CAT5e/6/7 Splitter can split and distribute
a single HDMI input and 2-way IR control up to seven CAT5e/6/7
outputs and includes a simultaneous HDMI bypass output. It supports
resolutions up to 1080p Full HD, 4K×2K timing, 3D and multi-channel
digital audio formats (such as LPCM 7.1CH, Dol-by TrueHD, Dolby
Digital Plus and DTS-HD). The HDMI bypass output can be connected
to an HDMI display or cascaded to another splitter. The CAT5e/6/7
outputs can be connected to CAT5e/6/7 to HDMI Receivers to extend
the operating distance up to 60 meters with Power Over Cable
feature.
2. APPLICATIONS
• Household entertainment sharing and control
• Lecture room display and control
• Showroom display and control
• Meeting room presentation and control
• Classroom display and control
3. PACKAGE CONTENTS
• HDMI over HDMI & CAT5e/6/7 Splitter
• IR Receiver x 1
• IR Blaster x 1
• 24V DC Power Adaptor
• Power Cord
• Operation Manual
4. SYSTEM REQUIREMENTS
• Source equipment with HDMI output connector
• Display TV/Monitor with HDMI input connector
• HDMI over CAT5e/6/7 Receivers with industry CAT5e/6/7 cables

2
5. FEATURES
• HDMI with 3D & 4Kx2K supported, HDCP and DVI compliant
• Simultaneous HDMI and CAT5e/6/7 outputs
• Supports one HDTV and seven CAT5e/6/7 outputs
• Supports data rate from 250Mbps up to 3Gbps
• Supports wide range of PC resolutions from VGA to WUXGA and
HDTV resolutions up to 4Kx2K (3840x2160@24/25/30Hz & 50/60
YUV_420 and 4096x2160@24Hz & 50/60 YUV_420).
• Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio transmission (32-192kHz sample rate)
• Supports distances up to 60 meters through CAT5e/6/7 cables
• Supports selection of Standard or TV EDID settings
• Supports Power over Cable (PoC) feature
• Supports USB service port
• Supports Bidirectional IR control
• The 3D signal display follow by display TV’s EDID
Note:
1.This system was tested with CAT6/23AWG cables, results may vary
with cables of a different specication.
2.Displaying HDMI 4Kx2K resolution require the standard 4Kx2K HDMI
cable and display in order for proper image displaying.
3.The PoC function is designed for powering compatible Receiver
units only non-PoC Receivers will need their own power supply.
Receivers of another brand may not be compatible.

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER SYNC
HDMI
LINK LINK 1LINK 2LINK 3LINK 4 LINK 5 LINK 6 LINK 7
CAT5e/6/7 OUT
1 2 3 4
1POWER LED: Once the power supply is connected the LED will
illuminate.
2SYNC: This LED will illuminate when the HDMI input port connected
to an active source.
3HDMI LINK: This LED will illuminate when HDMI output is connected
to TV or display monitor.
4LINK 1~7: The link LED will illuminate when both the input source
and output display signals are connected through CAT cable.
6.2 Rear Panel
1HDMI OUTHDMI IN 234567
SERVICE
CAT5e/6/7 OUT
STD TV
DC 24V
IR IN IR OUT
EDID
1 2 3 6 7 84 5
1HDMI IN: Connect with source equipment such as DVD/Blu-ray or
PS3 player.
2HDMI OUT: Connect to HDMI display for instant image display or
cascade with another family type Transmitter.
3CAT5e/6/7 OUT 1~7: Connect these ports to CAT5e/6/7 to HDMI
Receivers with CAT5e/6/7 cable to extend the signal up to 60m.
4IR IN: Connect with IR Extender to receive IR signal from Transmitter
side and blast out at Receiver side. Ensure that remote controller
being used is within the direct line-of-sight of the IR Extender.
5IR OUT: Connect with IR Blaster to blast out the IR signal received
from the Receiver side. Place the IR Blaster in direct line-of-sight of
the equipment to be controlled.

4
6EDID STD/TV: The default factory setting is on STD, leave as it is
when the display is properly. When in TV mode the unit will detect
the 1st CAT5e/6/7 output’s EDID when it obtain a 4Kx2K EDID and
send out the signal accordingly to other output ports. If the 1st
CAT5e/6/7 output is without a 4Kx2K's EDID the unit will detect all
output's EDID and send out the signal that all outputs can accept.
This device obtain the last memory function therefore, the device
will use the last output port 1's EDID when output port 1 is not
connected to a display after power cycling or switching in
between the EDID setting.
Switch to STD to use build-in EDID if the display has problem.
STD EDID’s video at 1080p@60Hz and audio at LPCM 2CH.
7SERVICE: This slot is reserved for factory service only.
8DC 24V: Plug the 24V DC power supply into the unit and connect
the adaptor to an AC outlet.

5
6.3 IR Cable Pin Assignment
3
1
3
1
2
2
Power
IR Blaster Signal
NC
IR Signal
Power
Grounding
IR Extender
IR Blaster

6
7. CONNECTION DIAGRAM
IR BLASTER
1.5m
60°
IR RECEIVER
7m
3m 3m
60°
m
1HDMI OUTHDMI IN 234567
SERVICE
CAT5e/6/7 OUT
STD TV
DC 24V
IR IN IR OUT
EDID
CAT5e/6 In
Link
IR1 Extender
IR2 Blaster
Power
Blu-ray or PS3 Player
3D TV/Display 3D TV/Display
HDMI Receiver
HDMI
HDMI

7
8. SPECIFICATIONS
Video Bandwidth 340Mbps/10.2Gbps
Input ports 1 x HDMI,
1 x IR IN,
1 x USB (Service only)
Output ports 1 x HDMI,
1 x IR OUT,
7 x CAT5e/6/7
Resolution Up to 4Kx2K (3840x2160@24/25/30Hz &
50/60 YUV 420/4096x2160@24Hz & 50/60
YUV 420)
HDMI Input & Output
Cable Distance
Up to 10m@1080p 8/12-bit
CAT5e/6/7 Output
Cable Distance
Up to 60m
IR Frequency 30~50kHz
Power Supply 24V / 2.7A DC (US/EU standards, CE/FCC/
UL certied)
Dimensions 432mm(W) x 174 mm(D) x 44 mm(H)/
Jacks Excluded
432mm(W) x 179 mm(D) x 49 mm(H)/
Jacks Included
Weight 2126 g
Chassis Material Metal
Silkscreen Color Black
ESD Protection Human body model:
±8kV (air-gap discharge)
±4kV (contact discharge)
Operating Temperature 0°C ~ 40°C
Storage Temperature -20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F
Relative Humidity 20 ~ 90% RH (non-condensing)
Power Consumption 62.7W

8
8.1 CAT5e/6/7 Cable Specication
Cable
Type
Range Pixel clock
rate
Video Data
Rate
Supported Video
CAT5e/6/7 60 m <=225 MHz <=5.3 Gbps
(HD Video)
Up to 1080p, 60 Hz, 36
bits, 3D (data rates
lower than 5.3 Gbps
or below 225MHz
TMDS clock)
40 m >225 MHz > 5.3 Gbps
(Ultra HD
Video)
4K2K, 30Hz video
formats
CAT6/7 60 m >225 MHz > 5.3 Gbps
(Ultra HD
Video)
4K2K, 30Hz video
formats
9. ACRONYMS
ACRONYM COMPLETE TERM
4Kx2K 3840x2160 / 4096x2160
DTS Digital Theater System
EDID Extended Display Identication Data
HDCP High-bandwidth Digital Content Protection
HDMI High-Denition Multimedia Interface
HDTV High-Denition Television

Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD
MPM-CHDBT-1H7CPL