CYP DCT-1 User manual

DCT-1
Optical to L/R Audio Converter
Operation Manual
Operation Manual

DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2012 by Cypress Technology.
All Rights Reserved.
Version 1.0 September 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 11/12/12 Preliminary Release
RDV2 26/12/12 Dimension

CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 1
6. Operation Controls and Functions....... 2
6.1 Front Panel ........................................2
6.2 Rear Panel.........................................2
7. Connection Diagram ............................ 3
8. Specications ........................................ 4

1
1. INTRODUCTION
The Optical to L/R Audio Converter is a compact and convenient
device for digital to analog audio conversion (DAC) selection. With
audio sampling rate supports up to 192kHz and I/O data rate supports
up to 24-bit, it provides a high standard of quality sound presentation.
This device is perfect use for digital recording systems, computer audio
systems, digital mixing consoles and etc… The Optical to L/R Audio
Converter is an ideal choice for digital optical audio conversion into
stereo L/R audio.
2. APPLICATIONS
• Converting digital optical audio into stereo L/R
• DVD audio insertion to self made video
• Digital audio display on personal active speakers
3. PACKAGE CONTENTS
• 1 x Optical to L/R Audio Converter
• Operation Manual
4. SYSTEM REQUIREMENTS
Input audio source equipment such as DVD/Blu-ray player with optical
output and L/R input device such as active speaker, PC/NB, amplier
and etc… with L/R cable.
5. FEATURES
• Supports digital audio signal input and convert it into analog audio
signal L/R output
• Supports non-compression digital LPCM stereo audio inputs
• Supports audio sampling frequencies: 32~ 192kHz
• Incoming bitstream 24bits of data for the left and right channels
• Compact size with elegant design and easy to install

2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
OPTICAL IN USB
5V
OPTICAL IN USB
5V
OPTICAL IN USB
5V
1 2
1OPTICAL IN:
Connect optical audio source such as DVD/Blu-ray player to
optical input port.
2USB 5V:
Connect the USB power port to a PC/NB with a Mini-USB cable or
Mini-USB to AV adaptor.
6.2 Rear Panel
RL
LINE OUT
RL
LINE OUT
RL
LINE OUT
1
1R/L LINE OUT:
Connect L/R output to active speakers or amplier for stereo audio
output.

3
7. CONNECTION DIAGRAM
DVD/Blu-ray Player
PC/NB Active Speakers
RL
LINE OUT
RL
LINE OUT
RL
LINE OUT
OPTICAL IN USB
5V
OPTICAL IN USB
5V
OPTICAL IN USB
5V
OR

4
8. SPECIFICATIONS
Input port 1x Optical
Output port 1 x L/R
Power Supply Powered by USB bus
Dimensions (mm) 55(W) x 80.5(D) x 22.5(H)
Weight(g) 65
Chassis Material Plastic
Silkscreen Color White
Operating Temperature 0˚C ~ 40˚C / 32 ˚F ~ 104 ˚F
Storage Temperature -20˚C ~ 60˚C / -4˚F ~ 140˚F
Relative Humidity 20 ~ 90% RH (non-condensing)

5