CYP CP-267S User manual

HDMI to DVI +
SPDIF(Coaxial)
Converter
Operation Manual
CP-267S

TABLE OF CONTENTS
1. Introduction.................................................................................1
2. Features.......................................................................................1
3. Package Contents..................................................................... 1
4. Operation Controls and Functions............................................1
4.1 Front Panel.............................................................................1
4.2 Rear Panel............................................................................. 1
5. Connection and Installation......................................................2
6. Pin Configuration........................................................................ 2
7. DVI-D Output Pin Assignment....................................................3
8. Specifications............................................................................. 3

1
1. Introduction
This converter box is designed to convert video and audio signal from
HDMI source to DVI plus Coaxial audio outputs. The product allows you to
connect the HDMI source to a display with DVI input meanwhile extract
digital audio signal from the same source to an audio receiver. The HDMI
converter box also does signal amplification and equalization for incoming
TMDS data before re-transmitting them with optimal quality regardless of
the incoming signal quality. Therefore, its output could be connected to
an HDMI device, with a DVI to HDMI cable or adapter, to be utilized as an
HDMI repeater.
2. Features
●HDMI 1.2, HDCP 1.1 and DVI 1.0 compliant.
●Supports HDMI input and DVI (or HDMI, using proper cable/adapter) with
Coaxial output.
●Detects input format between digital RGB and YPbPr automatically.
●Supports input/output video resolutions up to UXGA (PC) or 1080p@60Hz
(HDTV).
●Supports input/output digital audio signal of LPCM, Dolby Digital or DTS.
●Supports HDMI signal amplification and equalization.
●Easy to install and to operate.
3. Package Contents
●HDMI to DVI + SPDIF(Coaxial) Converter
●5V DC power supply adaptor
●Operation Manual
4. Operation Controls and Functions
4.1. Front Panel 4.2. Rear Panel
1 HDMI Input: Connect the HDMI input port to the HDMI output port of
your source equipment such as DVD player or set-top-box.
2 Power Supply: Plug the 5VDC power supply into the unit and connect
the adaptor to AC wall outlet.
1 2
DC 5V
HDMI INPUT
3 4
OUTPUT
DVI-I
SPDIF

2
3 DVI Output: Connect the DVI output port to the input port of your DVI
display such as monitor or projector. Or, connect to the HDMI output
port of your LCD TV, using DVI to HDMI cable or adapter. Note that this
jack is of DVI-I type, but only DVI-D (digital video) signal will be
supported.
4 SPDIF(Coaxial) Output: Connect the Coaxial output port to the digital
audio input port of your digital audio receiver.
5. Connection and Installation
6. Pin Configuration
A. HDMI Input Pin Assignment
Pin#
1
3
5
7
9
11
13
15
17
19
Pin#
2
4
6
8
10
12
14
16
18
Function Assignment
TMDS Data2+
TMDS Data2-
TMDS Data1 Shield
TMDS Data0+
TMDS Data0-
TMDS Clock Shield
CEC
SCL
DDC/CEC Ground
Hot Plug Detect
Function Assignment
TMDS Data2 Shield
TMDS Data1+
TMDS Data1-
TMDS Data0 Shield
TMDS Clock+
TMDS Clock-
Reserved (N.C. on device)
SDA
+5V Power
1
2
19
18
DVD Player
or
Set -Top Box
HDMI cable
HDMI cable
DVI Cable
Monitor,HDTV,Projector AmplifierLCD TV
Coaxial Cable
Audio receiver
or

7. DVI-D Output Pin Assignment
DVI-Digital(DVI-D): Supports digital-only connections between the host
computer and display. This interface is designed for a 12 or 24-pin
connection to enable single or dual-link mode activation.
8. Specifications
Input port: 1 x HDMI
Output ports: 1 x DVI, 1 x SPDIF(Coaxial)
Power Supply: 5V/1A DC (US/EU standards, CE/FCC/UL
certified)
Dimensions (mm): 105(W) x 76(D) x 30(H)
Weight(g): 188
Chassis Material: Aluminum
Silkscreen Color: Silver
Operating Temperature: 0°C ~ 40°C
1 8 C1 C2
C5
C4
C3
9
17 24
Digital only connector pin assignments
Pin Signal Assignment Pin Signal Assignment
1
2
3
4
5
6
7
8
C1
C4
T.M.D.S Data2-
T.M.D.S. Data2+
T.M.D.S. Data2 Shield
N.C.
N.C.
DDC Clock
DDC Data
No Connect
N.C.
N.C.
9
10
11
12
13
14
15
16
C2
C5
T.M.D.S Data1-
T.M.D.S. Data1+
T.M.D.S. Data1 Shield
N.C.
N.C.
+5V Power
Ground (for +5V)
Hot Plug Detect
N.C.
N.C.
Pin Signal Assignment
17
18
19
20
21
22
23
24
C3
T.M.D.S Data0-
T.M.D.S. Data0+
T.M.D.S. Data0 Shield
N.C.
N.C.
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock-
N.C.
3

2008.1.16 MPM-CP267S

Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD.