CYP 5-Play HDBaseT PU-507WPRX User manual

PU-507WPRX
5Play™ HDBaseT™ Wall Plate Receiver
(inc. PoC & single LAN, up to 100m)
OPERATION MANUAL
5-Play™

DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2019 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
V1.00 29/01/13 First Release
V1.01 08/10/13 Minor updates
V1.02 22/08/19 Updated Specifications

CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................6
5. Features..................................................7
6. Operation Controls and Functions.......8
6.1 Receiver Front Panel................................. 8
6.2 Receiver Rear Panel................................... 9
6.3 IR Cable Pin Assignment ......................... 9
6.4 D-Sub 9 Pin Definitions .........................10
7. Connection Diagram .......................... 11
Option 1: Point to Point................................11
Option 2: Matrix System...............................12
8. Specifications...................................... 13
8.1 Technical Specification ..........................13
8.2 Cable Specifiions......................................14
9. Acronyms............................................. 15

6
1. INTRODUCTION
The flagship PU-507-RX HDBaseT™ Receiver is now available in a Wall Plate
version for seamless integration into any installation. It is designed to
receive uncompressed video, audio and IR control data from a compatible
transmitter over a single run of CAT5e/6/7 cable at a distance of up to 100
metres at 1080p or 70 metres at 4K. It has the added benefit of control
through the built-in RS-232 and IR ports and a bi-directional LAN serving
connection. Additionally, it can be powered by a compatible transmitter
unit via the Power over Cable (PoC) functionality allowing for greater
flexibility in installations.
2. APPLICATIONS
Household entertainment sharing and control
Lecture room display and control
Showroom display and control
Meeting room presentation and control
Classroom display and control
3. PACKAGE CONTENTS
HDMI over Single CAT5e/CAT6 Receiver x 1
IR Receiver x 1
IR Transmitter x 1
Operation Manual
4. SYSTEM REQUIREMENTS
HDMI equipped source device (connected with HDMI cables) or DVI
equipped source (connected with DVI to HDMI cables)
HDMI equipped display (TV or monitor) or an HDMI equipped AV
receiver, connected with HDMI cables
Industry standard CAT5e/6/7 cable
Compatible PoC HDBaseT™ Receiver.

7
5. FEATURES
HDMI 1.x and DVI 1.0 compliant
HDCP compliant
Supports HDMI 3D and 4K x 2K features
Supports HDCP repeater and CEC bypass
Supports distance up to 100m/328ft at 1080p and 70m/229ft at 4K
through CAT5e/6/7 cable
HDMI input resolutions up to 4K@60Hz (YUV 4:2:0, 8-bit) or 4K@30Hz
( YUV 4:4:4, 8-bit)
Supports pass-through of audio formats including LPCM 2.0/5.1/7.1,
and Bitstream over HDMI
HDBaseT™ 5Play™ convergence: uncompressed high definition Video and
Audio, LAN serving, Power over Cable (PoC) and RS-232/IR control
Easy to install wall plate design
Note:
1. This system was tested with CAT6/23AWG and CAT5e/24AWG cables,
results may vary with cables of a different specification.
2. The PoC function requires a compatible Transmitter unit. Transmitters
from other brands may not be compatible.
3. For playback of 4K2K HDMI source signals, a 4K2K capable display and
High Speed HDMI cables are required.

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Receiver Front Panel
HDMI OUTLAN
POWER
LINK
IR 1
EXTENDER
IR 2
BLASTER
RS-232
OUT
1 2 3 4 5 6 7
1IR 1 EXTENDER: Connect an IR Extender cable for IR signal reception.
Signals received will be transmitted from any IR blaster connected to
the transmitter unit. Ensure that the remote being used is within the
direct line-of-sight of the IR Extender.
2IR 2 BLASTER: Connect an IR Blaster cable for IR signal transmission.
IR signals received by an IR extender connected to the transmitter unit
will be transmitted by this blaster. Place the IR Blaster in direct line-of-
sight of the equipment to be controlled.
3RS-232 OUT: Connect to the device that is to be controlled (via D-sub
9-pin female cable) by RS-232 commands.
4LAN: Connect to an active network for LAN serving. When the
transmitter or any compatible LAN equipped receivers are connected
to a network, this allows the network access (including internet access
if available) to be shared between the receiver and all connected
receivers. Connect any Ethernet equipped device e.g. a Smart TV or
games console to the LAN port of a receiver for that device to share
the network/internet access.
5HDMI OUT: Connect to a HDMI equipped TV/monitor for display of
the HDMI input source signal.
6POWER LED: This LED will illuminate when the device is connected to
a power supply or powered by another unit via PoC.
7LINK LED: This LED will illuminate when both the source connected
to the transmitter and the display connected to the receiver are
connected.

9
6.2 Receiver Rear Panel
1
1CAT5e/6/7 IN: Connect to the transmitter unit with a single CAT5e/6/7
cable for transmission of all data signals.
6.3 IR Cable Pin Assignment
3
1
2
3
2
1Power
IR Blaster Signal
NC
IR Signal
Power
Ground
IR Extender
IR Blaster

10
6.4 D-Sub 9 Pin Definitions
Pin Define TX/RX
1N/C
2TxD/RxD
3RxD/TxD
4N/C
5GND
6N/C
7N/C
8N/C
9N/C

11
7. CONNECTION DIAGRAM
Option 1: Point to Point
HDMI OUTLAN
POWER
LINK
IR 1
EXTENDER
IR 2
BLASTER
DC 24V
RS-232
OUT
RS-232 In
LAN
HDMI In
HDMI to CAT5e/6with LAN/IR/RS232
Transmitter
CAT5e/6 Out
Link
IR2 Extender
IR1 Blaster
DC 24V
Power
7m3m 3m
60°
m
m
m
1.5m
60°
1.5m
60°
7m3m 3m
60°
m
m
3m
Internet
Router
LAN Connection
LAN Connection
RS-232
RS-232
RS-232 Equipped
HDMI Switcher
RS-232 Equipped PC
or Notebook
Note: The receiver is
powered via PoC by the
transmitter.
HDMI
Input
HDMI
Output
Power
Supply
Smart TV
IR Extender
IR Extender
DVD/Blu-ray Player
IR Blaster
Single
CAT5e/6/7
Cable
IR Blaster
Compatible
Transmitter
unit with PoC

12
Option 2: Matrix System
8
HDMI IN
CONTROL
RS232
SERVICE
IR OUT
IR IN
IR OUT
IR IN
IR OUT
IR IN
ALL A B C D E F G H
CAT5e/6OUT
IR OUT
IR IN
CAT5e/6OUT
IR OUT
IR IN
CAT5e/6OUT
IR OUT
IR IN
CAT5e/6OUT
IR OUT
IR IN
CAT5e/6OUT
IR OUT
IR IN
CAT5e/6OUTCAT5e/6OUT
IR OUT
IR IN
CAT5e/6OUT
MAIN 24V
POE 24V
1
HDMI IN
2
HDMI IN
3
HDMI IN
4
HDMI IN
5
HDMI IN
6
HDMI IN
7
HDMI IN
1
2
3
4
V+
GND
GND GND
V+
HDMI OUTLAN
POWER
LINK
IR 1
EXTENDER
IR 2
BLASTER
RS-232
OUT
7m3m 3m
60°
m
m
m
1.5m
60°
7m3m 3m
60°
m
m
m
1.5m
60°
CAT 5e/6/7 Cable
(LAN Serving)
Single
CAT5e/6/7
Cable
HDMI
Input
PoC Power Supply
Main Power Supply
Blu-ray Player
Internet
Router
HDBaseT
Transmitter
(8×8 Matrix)
Up to 7 Other Zones
Up to 7 Other Sources
RX
HDMI
Output
TV/Display
IR
Extender
IR Extender
IR Blaster
IR
Blaster Note: The receiver can be used in a wider HDMI
matrix system and can be powered via PoC by a
compatible matrix/transmitter unit.

13
8. SPECIFICATIONS
8.1 Technical Specification
Video Bandwidth 340 MHz/10.2 Gbps
Input Ports 1×CAT5e/6/7,1×LAN, 1×IR Extender
Outpu t Ports 1×HDMI,1×RS-232, 1×IR Blaster
IR Frequency 30 – 50kHz
(30 – 60kHz under ideal conditions)
Baud Rate Up to 115200/sec
ESD Protection Human-body Model:
±8 kV (air-gap discharge)
±4 kV (contact discharge)
Dimensions 145.7 mm (W)×85.7 mm (D)×36.5 mm (H)/
Jacks Excluded
145.7 mm (W)×85.7 mm (D)×39.5 mm (H)/
Jacks Included
Weight 160 g
Chassis Material Plastic
Colour White
Operating Temperature 0 °C~40 °C/32 °F~104 °F
Storage Temperature −20 °C~60 °C/−4 °F~140 °F
Relative Humidity 20~90 % RH (non-condensing)
Power Consumption 12W (PoC), 9W (Main)

14
8.2 Cable Specifiions
Cable Length
1080p 4K30 4K60
8-bit 12-bit
(4:4:4)
8-bit
(4:2:0)
8-bit
High Speed HDMI Cable
HDMI Input 15m 10m 5m 5m
HDMI Output 15m 10m 5m 5m
Ethernet Cable
Cat.5e/6/7 100m 70m
1080p (FHD Video)
-Up to 1080p@60Hz, 12-bit colour
-Data rates lower than 5.3Gbps or below 225MHz TMDS clock
4K30 (UHD Video)
-4K@24/25/30Hz & 4K@50/60Hz (4:2:0), 8-bit colour
-Data rates higher than 5.3Gbps or above 225MHz TMDS clock but
below 10.2Gbps

15
9. ACRONYMS
ACRONYM COMPLETE TERM
CAT5e Category 5 Cable
CAT6 Category 6 Cable
CEC Consumer Electronics Control
DVI Digital Visual Interface
HDCP High-bandwidth Digital Content Protection
HDMI High Definition Multimedia Interface
IR Infrared

CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton,
Middlesex, TW17 8BA
Tel: [phone] | Fax: [phone]
Email: [email protected]
www.cypeurope.com
v1.02