10
6.3 Remote Control
1Power: Press this button to switch the
device on or to set it to standby mode.
2Info: Press this button to display the
device’s rmwareersion.
3Input CH 1/2/3/4: Press these buttons
to cycle through the HDMI sources (1 to
4) for each channel to be displayed on
screen.
4WA~WH: Press these hot keys to select the
screen setting where WA to WD display the
selected channel in full screen and WE to
WH display dierent combinations of all 4
channels on the same screen.
5Mute: Press this button to mute the audio
from the HDMI output.
6▲▼►◄ and OK Buttons: Press these buttons to navigate through
the OSD menu and press OK to enter or conrm settings.
7Menu: Press this button to enter into the OSD menu.
8Exit: Press this button to exit the OSD menu or settings.
9Fade-In-Out*: Press this button to switch on or o the Fade in/out
function.
10 Chromakey*: Press this button to activate the Chroma key function
where CH 1 is the background and CH 2 is the overlaid (top)image.
11 Mirror*: Press this button to display the screen in mirror image.
12 Rotation*: Press this button to rotate the image 90˚ left/right or 180˚
upside down.
13 Audio 1/2/3/4: Press these buttons to select the audio from HDMI
input source 1 to 4.
14 FAV. 1/2/3/4: Press these buttons to bring up the previously stored
customised screen settings.
Note: The functions with an asterisk (*) will only work when displaying
Windows A to D. The system will revert to Window A if these functions are
used when Windows E to H are displayed.
WA WE CH 1
WB WF CH 2
WC WG CH 3
WD WH CH 4
Input
Mute
Menu
OK
Exit
Audio 1Fade In-Out FAV. 1
Audio 2Chromakey FAV. 2
Audio 3 MirrorFAV. 3
Audio 4 RotationFAV. 4
Info Power
CR-124
1
3
6
7
9
11
2
4
5
8
14
13
12
10
